bar mixer

...The AER-SL is an ideal aerator/mixer for applications that require intensive mixing, the generation of a directional current, and a moderate supply of oxygen. The combination of an open triple spiral SCREWPELLER® and a vacuum chamber (Venturi system) allows for the suction of air and the dispersion of fine to medium air bubbles below the water level in the basin. The propeller ensures mixing and the generation of a directional current. The AER-SL can be mounted on a floating structure, on a guide bar (with or without a float), or weighted at the bottom of a basin.

...Short spout sink mixer with clinical lever Clinical lever: spout length 17.5 cm...

...Combination of household comfort through ceramic cartridges and lightweight design through plastic housing. The spout and adjustable shower head (jet or spray, or completely shut off) are extendable with a hose (150 cm). Heat-resistant up to 3 bar. Optional equipment with microswitch.

... necessary for the intended use from time to time (2-3 kg of mixture at a time may be more that sufficient). The mixture of SYNTECH H.A.G. ECO and its catalyst can be injected with a manual or electric pump for monocomponent resins, at pressures ranging between 40 and 200 bar. The reaction speed can easily be adjusted based on the accelerator (component B) quantity. Adding a greater quantity of catalyst...

...providing perfect control of the load on steep slopes. Its wider support bar allows the operator to secure themselves firmly, regardless of the terrain's challenges. Its self-loading bucket of 350 liters makes it the largest carrier in its category. To mitigate risks on slopes, we have focused on optimally lowering the center of gravity. €184.39 per month for long-term rental* based on a 48-month lease with no down payment (* Offer reserved for professionals – Buyback value = 2%)...

... bowl mixer are as follows: stainless steel bowl, knife and spiral hook, automatic and manual control, quiet mechanical system and power transfer, and a mechanical and security system compliant with CE standards.

...Our laboratory mixer in coaxial dissolver design is versatile and variable in its performance and approach size. Technical Data: Drive power dissolver: 7.5 kW Drive power scraper: 1.5 kW Speed dissolver: 230 — 2300 rpm Speed scraper: 6 — 30 rpm Usable volume: 100 l Operating pressure: 1 bar (g) Operating temperature: 60 °C Material in contact with product: Stainless steel 1.4571...

...1 REFRIGERATED BAR COUNTER L223 H120 P.82.5 cm. (with 4 CELLS + BUILT-IN MOTOR) 1 Ventilated Refrigerated Display L120 H120 P82.5 cm (with 2 REFRIGERATED GLASS SHELVES, LED LIGHTING, SLIDING DOORS, and BUILT-IN MOTOR) Option for a Heated Display also available. 1 BASE Coffee Machine L150 H95 P66 cm (with SINK D420, MIXER, FLAP DOOR, BOTTOM HOPPER, DOUBLE OPEN SHELF) 2 BASES WITH 2 FLAP DOORS L100 H95 P65.8 cm, 1 BOTTLE RACK 'ZETA' L198.5 H40 P23.6 cm. For other colors and finishes, contact the office at 392 926 1060.

... as silent via belt transmissions of main power. It is a mobile machine and the wheels have locking system. Optionally, the temperature measuring unit may be added. process and allows to remove the bowl by user. The bowl is fasten to the mixer`s body with a locking system. By the way kneading standardization is always assured. The other specifications of removable bowl mixer are as follow: stainless steel bowl, knife and spiral hook, automatic and manual control, silence in mechanical system and power transfer, mechan-ical system and security system according to CE standards. ...

Welcome to the MPDrink® World We are pioneers in the industry and hold one of the largest ranges of cups and utensils in the world. We invest in models and colors with ergonomic designs and in materials known for their durability and resistance, enhancing each product for different markets. Since 2007, our products have been continuously growing, and to solidify our customers' trust, in 2008 MPD...

... threads 3/4 ”1/2” Ideal working pressure 34 Bar Our products are made of 1st quality brass material. 5 years warranty. Water and pressure testing has achieved 100% success in all of our products. Our products are made of healthy materials. Our products are high quality chrome plated. CARTRIDGE DIAMETER:35 Q HEIGHT OF EARTH:150 MM COLOR:CHROME PLATING INSTALLATION TYPE:STANDARD...

... 40. Selector for excluding 2nd speed. Manual rotation button for the bowl. Voltage: 400 Volt/50hz/3Ph. Bowl protection: with stainless steel grid or with plastic cover. Cutting bar: rectangular. 2 speeds for the spiral and the bowl.

... for intuitive machine operation in service and automatic mode for production and cleaning operations. 1: Double jacket for heating and cooling 2: Feeding via vacuum 3: Liftable mixing tool 4: Pressure shock resistant up to 12 bar 5: Electrical control according to GAMP5 requirements 6: Connection to fluidized bed processor...

...Angle Thermostatic Radiator Valve / Angle PX-B Thermostatic Radiator Valve / Straight Thermostatic Radiator Valve ** / Body : Brass (CW617N) / Body Type : Angle & Straight Type / Handwhell : Ebonite - Plastic (ABS) / Gasket : No, Optional / Max. Working Temp. : 120 ºC / Max. Working Pressure : 10 Bar *** Application Areas : Hot and Cold Water Systems Conformity :TS EN579 Nominal Diameter DN:DN15 Pressure class:PN10 Connection Type :Threaded (MM-MF)...

...Marketed for over 10 years with more than 1,200 units sold, this tracked vehicle has been improved twice: in 2018 with a wider support bar and in 2020 with the replacement of the track tension springs with a manual tensioning system, allowing track installation and removal interventions to be reduced to just a few minutes (note: some photos on our site correspond to the old version with tension springs). Load: 700 kg Max slope: 45°...

Since 2007, VISTAGLO has specialized in glow sticks and luminous goodies for all your events. The adventure began with the collaboration of two distributors, one French and one German, of chemiluminescent products. These products are related to light and events: fluorescent items like glow bracelets, accessories, jewelry, gadgets, LED-powered luminous goodies, decorative lighting, and numerous pro...

...Standard equipment: 3 exterior doors (including one accessible for people with reduced mobility) 3 interior doors 3 windows 4 interior partition walls 3 LED lights 36W 3 electrical outlets 3 switches 3 fan heaters 2 kW Air extractor 170 m³ 3 floor drains Toilets: 5 WC bowls 2 urinals 3 sinks with lever mixer 3 mirrors 5 paper roll holders 3 soap holders 3 towel holders 1 support bar (accessible...

... Filter inserts for corner valves 3/8” included. 0.3 bar minimum flow pressure; Flow rate approx. 19L/min at 3 bar flow pressure. Pressure-resistant/non-pressure. EAN 40 34154 02322 2: Art. No. TG2MWE8AST20ii7 5 DMK...

...Photocell mixer in polished and chrome-plated cast brass – built-in solenoid valve and battery easy to replace – anti-flooding function stops after 60 seconds of continuous flow – anti-legionella function dispenses for 45 seconds after 24 hours of non-use – powered by a standard 9V alkaline battery for approximately 100,000 uses (2 years) – includes 2 stainless steel flexible hoses 350 mm with special non-return valves and stainless steel filters. Dynamic pressure 0.5-6 bar – maximum temperature 70°C – mounting hole mm.34 for surfaces up to mm.40 thick.

...Customized Vertical Vacuum Dryers with a volume of 50 to 1000 liters MAIN FEATURES Volume of 50 to 1000 liters Compact spiral mixer allows mixing without dead space Operating pressure -1 to 0 bar Operating temperature -20 to 150°C Heated jacket 3 bar Construction material AISI 316L/Ti Internal surface polished Ra≤0.8 μm AC drive with variable frequency converter for maximum processing...

...VERTICAL AXIS MIXER Lt 70-200 with wheels and tow bar.

...POWER SD 5 READY PLASTERING MACHINE Technical Specifications Machine Type: POWER SD 5 High quality mixing Easily disassembled and transported High quality electrical panel application 2 years warranty period – Delivery export value package type. Technical Data Power Supply 380 V - 50 Hz Motor Power 5.5 kW Compressor Capacity 250 liters/min - 5.5 bar Carrying Capacity * 5-40 liters/min...

...Two-speed housing with cable control. Front transmission via wide-angle cardan. Conical overflow ring. Height-adjustable and reversible hitch. Hydraulic brake + parking brake. Rear fire bar. 2 hydraulic counter-knives long = 600 mm for 20 & 22 m³ 2 hydraulic counter-knives long = 900 mm for 12, 14, 16, 24, 27 m³. Right side distribution hatch Turbine bedding system Two-speed housings (turbine) Wide front hatch Large diameter turbine with bolted blades Side chute.

...where it is mixed with a certain amount of water. The wet sugar is then sent to the mold from the loading section known as the feeder mixer. The sugar enters the mold and is compressed by the pressing mold to take on the cube shape.

... developments of high performance static mixers such as the SMB-R and SMB-GX which have become the technology standards in the industry. StaMixCo manufactures SMB-H static mixers by advanced proprietary manufacturing technique where the entire unit is machined from a solid rod of bar stock material without welding. This machining process allows for custom static mixer fabrication in virtually any L/D...

... equipment with bigger gap width Development: Better sealability of stuffing box Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 500 bar, Velocity [v max]: 3 m/s Pressure [p max]: 250 bar Temperature: t = -100… +280 °C pH: 2 - 12 Density: 1.50 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Suitable for Pulp and paper industry Sugar industry Waste water technology Chemical industry Variant Square shape S12K Plunger with ParaAramid-Corner...

... heating. The unit has an inlet hopper where the product is directed to the brittle bar line machine. The mixed product is then directed to a series of rollers, where the user can adjust the cutting height. The shaping and forming rollers are controlled and subsequently synchronized with motors. The size of the brittle bars can vary according to user needs, and the blades are designed to cut accordingly. A horizontal pneumatic sharpened cutter is used for cutting the brittles at regular intervals from a specific system.

...TECHNICAL SPECIFICATION Engine : 4 Cycle Engine Power : 6.5 HP Engine Speed : 3600 rpm Fuel Tank : 3.6 Lt Pump : ES-30 2 Membrane Pump Pressure: 40 bar Pump Capacity : 30 Lt/min Tank : 200 Lt Tank of Type : Polyethylene & Polyester Mixer : Exists Operating Speed : 540 Lt/min Weight : 90 Kg...

...We manufacture pneumatic laboratory stirrers and stirrer systems with a lamella motor, featuring quick start and a gentle start-up suitable for a maximum of 6 bar. Our magnetic stirrer closures made of stainless steel or PTFE are equipped with high-quality magnets and are produced according to specifications with NS joints or flat flanges.

...(Multi-hand mixing tool for double cartridges) MV 1:1, MV 2:1, V 4:1, MV 19:1 2kN (220kgf) thrust at 6.8 bar operating pressure Conversion kit 2:1, 4:1 or 10:1 included Net weight 2210g...