bar loaders

...About 70 automatic, multi-spindle turning machines for series production of high precision parts, can machine bars or tubes with a capacity from 5mm diameter to 100mm. Torneria Serra relies on its machining mostly on GILDEMEISTER, MORI SAY, PITTLER, WICKMAN lathing centers. In order to increase the already high productivity of such machinery, the lathers have been equipped with automatic bar loaders. These machines are particularly suitable for high series production volumes of average complexity.

...The basis of short bar loader Multi 3000SL was developed in Switzerland. It was specially designed for turning machine types with a large distance between machine cover and spindle end. The bar feeder is supplied as standard with a Z-axis sliding unit to ensure free access to the Spindle Liner. This makes it easy to change the spindle insert tube. The Bar Loading Magazine is manufactured in...

... a slight pressure on the bar. The welding machine in a single operation carries out the welding of the package, the cutting of the film and the welding of the bottom of the next envelope. This operation takes place using an electromagnetic blocking device. By equipping the bagging machine with several loaders, it is possible to increase the productivity of the machine. To avoid waiting times...

...The sorting bucket is a custom-made tool for various sorting tasks. Operating weight 1 to 8 tons Features • Main and side cutting edges made of high-strength wear-resistant steel • Base made of grid bars • Optional with bolted tooth system • Grid bars optionally made of wear-resistant steel Application area The sorting bucket is a custom-made tool for various sorting tasks. With its grid bar base, it can be used to sort paving stones, rubble, and construction debris.

...Utilization of the Yanmar 4TNV88 engine, 4 cylinders, low fuel consumption, environmental protection, practical repair and maintenance. 2. Electronic monitoring using an advanced multifunctional liquid crystal display with a dot matrix type, and the electronic throttle control system features gas control, automatic idle, overheating protection, and speed acquisition. Length: 1140 mm Weight: 4800 kg Speed: 2 km/h Consumption: 2.3 l/h Tear force capacity: 7.5 kN Available hydraulic pressure: 160 bar Hydraulic flow rate: 21 l/min...

... planting Reference: J1175030 Drill drive: Hydraulic via mini-excavator, wheeled loader, tractor, etc. Available bits: 150, 225, 300, 350, 450, and 600 mm (All bits from our TBG-100 and TBG-200 tractors can be used) Rotation speed: 5-300 rpm (depending on the capacity in liters) Torque: 370 Nm Power: max. 11 kW Operating pressure: 180 bar Minimum oil flow: from about 15 liters, trouble-free operation is guaranteed, maximum flow 60 liters Weight: 28 kg Control number: 1032073091...

...The compact, powerful Cat skid steer loaders with hydrostatic drive, selectable differential locks, articulated pendulum joint, and robust Z-bar loader geometry provide especially more breakout force -...

...Precision turned parts made from titanium, stainless steel, aluminum, brass, exotic materials, and precious metals. Batch sizes between 100 and 15,000 pieces. In our turning shop, we utilize state-of-the-art turning machines, which enable a largely automated production process through the use of loading robots, portal loaders, and bar feeders. Our machines are equipped with automatic measurement...

...Our Capabilities in Turning With our extensive machinery, we can offer our customers a wide range of very flexible solutions: Processing of all materials Diameters up to 400mm (length up to 1200mm) Sawed pieces, bar material (1m and 3m loaders), as well as blanks (cast and forged parts) Complex milling operations on the lathe Production of small, medium, and large series Quality standard according to ISO 9001:2015 Customer-specific testing procedures upon request...

...The interesting model range of Vermeer’s drive-controlled compact loaders, equipped with over 70 attachments, opens up entirely new possibilities for you. With a low ground pressure of just 0.2-0.4 bar, gentle operation on various surfaces is ensured. A non-slip standing platform provides the operator with secure footing. The installed impact protection padding at thigh and hip height adds further comfort for the operator, even in uneven terrain. All models can be intuitively and user-friendly operated via the joysticks, including a one-handed chassis control.

... is mounted on a skid which can be lifted by a hook lift system on the truck (rigids only). All is driven by a stationary ICE or hydraulically from the truck engine. These units are used on bulk sites where large amounts of dry bulk materials are stowed (e.g. coals, sand, …). Sprinklers keep the surfaces wet so the generated dust is kept under control. The unit has a spraying monitor which sprays water in all directions. With or without a spraying bar on the lower part of the truck to spray road surfaces. These units are available both as rigid or semi-trailer. ...

...Turning short material bars profitably and flexibly With a short bar loader, the machining performance of any CNC lathe can be optimized by reducing non-productive times. An additional advantage is that leftover pieces can be reprocessed. Two versions of short bar loaders are available: ILS-RBK and ILS-MUK. Since the short bar is fully pushed into the machine spindle by the loader, the spindle...

...Operating pressure up to 210 bar, Torque up to 50,000 Nm, Angle of rotation up to 360° Technical specifications: Operating pressure up to 210 bar Torque up to 50,000 Nm Angle of rotation up to 360° Preferred application areas: Loaders for waste collection vehicles Vehicle construction Operating pressure: up to 210 bar Torque: up to 50,000 Nm Angle of rotation: up to 360°...

... only 150 kg Low oil requirement of only 45 l/min Working height up to 6.7 m possible with standard front loader Usable from 30 HP tractor Ideal for wheel loaders and excavators as well With this new branch saw, it is now finally possible to cut large branches precisely and individually. Due to the low machine weight of only 150 kg, this branch saw can be mounted on tractors starting from 30 HP. For road travel, the saw head can be mechanically folded in. The operation of the machine requires a forward and reverse flow of only 45 l/min.

...Single and series production in aluminum, stainless steel, steel, and plastics • Powered tools enable the production of finished parts: o turned o drilled o milled o notched o internal hexagon • Bar loaders help save costs through multi-machine operation. • Twin-spindle machines with multiple axes and rotating tools increase positional tolerances.

...For excavators with a hydraulic oil capacity of 200 l/min at 280 Bar. Designed for digging trenches in challenging situations that can still be reached with the excavator arm. Behind hedges, guardrails, next to roadways, in ditches, etc. The trenching machine is up to ten times faster than an excavator with a bucket, where precise width and depth are required. Main features of the MH100...

... expert services. We successfully collaborate with the premium manufacturer Hyundai WIA to offer you a wide range of high-quality machining centers. A 500 sqm showroom for you, featuring the latest turning and milling centers. Our constantly changing exhibition machines invite you to visit time and again. To provide you with a complete range, our offerings include not only machine tools but also peripheral devices such as bar loaders, pallet changers, and extraction systems, as well as financing options. A team of 25 employees in sales and service looks forward to assisting you.

Rental and service of tower cranes (LIEBHERR, PEINER, POTAIN, CATTANEO), HDS cranes (PALFINGER, HMF, PM, FASSI, EPSILON, FUCHS), hook loaders (PALIFT), mobile platforms (BAR, MBB, ANTEO), truck-mounted cranes, and hoists. Installations, UDT inspections, maintenance checks, upgrades, spare parts. Training for operating lifting equipment.

AGRO-MR specializes in the sale and production of agricultural machinery. We manufacture attachments for loaders and front loaders. Our products are powder-coated, and we use thick sheets in our products, with a minimum thickness of 6mm. Strong hoses rated for 330 bar. The blades are made only from Hardox. Our main products include: - universal bucket - volumetric bucket - crocodile bucket...

... milling machines, measuring machines, bar loaders, grinders, and traditional machines. Numerical control machine tools are used in the production sectors of the metalworking and manufacturing industries, as well as in all production environments where production needs to be managed centrally. The machine tools are used for the processing and transformation of metals, wood, and stones, and are provided by LD in good working condition, ready for immediate use.

... mm to ø 65 mm with automatic loaders and up to ø 250 mm with a self-centering system, as well as sheet metal processing with a thickness of up to 15 mm. Flexibility is the strength of our production capacity: this attitude allows us to process all ferrous and non-ferrous materials: brass - alloy steels - special steels - stainless steels - aluminum and bronze alloys - copper - cast iron - plastic materials (nylon, POM, PVC) - sampling of small, medium, and large series products. Procurement of certified materials (REACH, ROHS).

CNC Turning CNC – Contract manufacturing in the field of turning, whether from bar stock up to a diameter of 65 or in a chuck up to a diameter of 200, our modern machines are equipped for your tasks. Thanks to automation solutions like bar and portal loaders, your small series are in good hands with us. CNC Milling CNC – Contract manufacturing of drawing parts in the cubic area is one of our...

AS Service GmbH: Electronics repair, industrial electronics repair, charging magazines, bar loaders, bar feeders, spindle service, spindle repair, motor service, electric motor repair, replacement monitors, spare monitors, assembly of components, retrofit, used lathes, used milling machines. The comprehensive service offering forms the core competence of AS-Service GmbH. Therefore, we provide our...

LNS FRANCE is based in Amancy. It specializes in the distribution of machine tools. Its offerings include bar feeders, bar loaders, and chip conveyors. LNS FRANCE provides its expertise in: long and short bars with diameters ranging from 1 to 120 mm, products for managing chips and cutting fluids, and peripheral equipment for machine tools, as well as oil mist collectors. It also offers bar feeding systems, cutting fluid management systems, air filtration systems, chip management systems, and magnetic separators and purifiers for metalworking machine tools.

...Design, production, assistance and sale of single-spindle and multispindle bar loaders for bar/pipe-fed machine tools. The products combine patented innovative technological solutions, reliability, si...

...Specialists in short bar loaders (bar feeders) for bar lengths up to 1620mm, diameter 2 to 120mm. Production and service of bar loading magazines brand HATEC AM90 / SL80 for loading CNC lathes.

...Born in 1997, R.T.A. s.n.c. of Debono A, Dell’Aia D. Bentivoglio M. is a company operating in the Metalworking Sector based in Atella (Pz), capable of meeting any required "Part" thanks to the know-how acquired over the years and the use of high-level precision machines, CNC machines with bar loaders, numerical controls for secondary processing, work centers, external grinding, and others with a...