surface cleaning Austria

...). As a rule, the PLASMEA® hygiene cloth cleans all surfaces in just one operation, simply with water. With the PLASMEA® hygiene cloth, you can save up to 25% of the work time and greatly reduce the need for cleaning agents. How is the PLASMEA® hygiene wipe used? -Immerse the plasma sheet in water -Wring out excess water -Plasma cloth is ready for damp cleaning -Remove dirt by wiping -Dirt and grease are bound in the cloth -Dirt in the cloth does not transfer to other surfaces ...

...Custom filter products for every application. Perfect technical advice and documentation for safe filtration applications. Automotive industry, food and beverages, pharmaceutical industry, chemicals and petrochemicals, wastewater treatment, paints and coatings, printing industry, surface finishing, freshwater treatment.

... type AR are not shielded due to their areas of application. Therefore, UV-C safety regulations must be strictly observed. Installation is straightforward, as with all STERILSYSTEMS devices – whether on the ceiling, on a wall, or directly above the surface to be disinfected. - Easy installation and maintenance - Economical and powerful...

...Universal cleaning or drying, maintenance cleaning, kitchen, floors Size: 50x60 cm Checkered structured surface...

...Used for neutralizing and cleaning metal surfaces after the use of pickling bands or REMBA care cloths. Thoroughly spray the acid-soaked surface with REMBA Neutral Cleaner and then wipe it down with a soft cloth. The cleaner also removes light dirt such as nicotine and soot. The pH test strip can be used to check the surface for acidity. The neutral cleaner is not classified as hazardous, is non-flammable, and has no classification according to GHS. Container size: 5x1 L including sprayer Application area: Neutralization of stainless steel surfaces Special feature: Cleaning without wastewater...

... crucial criterion, especially in the industrial sector, in parking garages, etc.), the representative appearance is often of great importance (e.g., in shopping centers). An important function is also the ease of hygienic cleaning and maintenance of the floor, particularly in the area of healthcare facilities.

...As a pre-treatment in galvanization, we offer the following techniques: • Stripping • Degreasing • Demetallization - Removal of old galvanization layers • Yellow-bright burning of brass, copper, and copper alloys • Ultrasonic cleaning • Pickling, derusting of iron, steel, and stainless steel...

...Descaling and Rust Removal Agent for Pipelines and Heat Exchangers GMG SWT 225 for the removal of rust, carbonates (scale), metal oxides, lime, dirt, and grease from coated surfaces in water-bearing systems. Heat exchangers, pipelines, cooling towers, etc., with linings made of stainless steel, steel, and copper alloys are cleaned gently yet effectively! GMG SWT 225 protects steel and copper alloys from surface attack through special corrosion inhibitors.

...Professional removal of rouging, known as derouging, is possible through targeted cleaning measures.

... rings, grinding segments, edge-stable resin-bonded grinding wheels, and diamond cutting discs for gray and ductile cast iron. The use of diamond significantly enhances performance. Application engineers assist in efficiently finding solutions, such as combining diamond and conventional tools. . High economic efficiency . Above-average tool life . Highest surface quality . Reduced noise and dust emissions . Clean cutting quality . Maximum product safety...

...System maintenance for translucent coated wooden windows based on cleaning-active substances and selected resins. The durability of water-based paints and stains is extended by a single application per year. Micro-fine cracks and pores in the stain film are sealed. Also ideal for the maintenance of garden furniture. Produces a satin-gloss surface effect. Can be easily overcoated. ADLER Care Set Smart Beistellg. SK (Laboratory Application) Special Features Contents: ADLER Top-Cleaner 100ml ADLER Top-Finish 100ml ADLER Hardware Oil 20ml Cleaning Cloth...

...Pirlo Tubes with Sponge Applicator – available in combination with our Pirlo RECY, Pirlo CLEAR, and Pirlo SHINE materials. Are you looking for tubes that allow for generous yet precise surface application? Then our Pirlo SPONGE tubes are just what you need! Our Pirlo SPONGE tube features an M15 sponge applicator and is ideal for household products such as shoe creams or polishing and cleaning...

...Dust extraction systems for surface technology from Dustcontrol efficiently remove dust during grinding and polishing of surfaces. Thanks to the filter technology, the air remains clean. In the manufacturing industry, there is a significant and diverse need for general cleaning and direct extraction in production through point extraction. Large amounts of dust, dirt, and metal shavings are produced and need to be eliminated; sometimes to be profitably recycled.

...Ride-On Floor Cleaning Machines for Large Areas Every location presents its own unique challenges, whether it's shopping centers, logistics halls, or the automotive industry, all requiring professional surface cleaning. High foot traffic, complex areas, ongoing operations, or various production residues. The new Hako Scrubmaster B260-R floor cleaning machine handles them all. With four different...

...This stator weighs 2.1 tons! The thermal cleaning has removed the insulation, paint, and other residues. Using pyrolysis, the resins and paints are removed from the stators to simplify the removal of the windings. Subsequently, the rotors are cleaned.

...Use Wiper Bowl® Magic Power Wipes to dissolve contaminants (repeat several times for very stubborn stains), then turn the cloth and wipe with the clean side. - specifically designed for removing graffiti, permanent markers, paints, and printer ink - suitable for all smooth and non-porous surfaces - non-woven wipes can be individually removed thanks to the tear-off perforation - free from aggressive solvents Safety notes: Avoid contact with mucous membranes and eyes. Keep out of reach of children. Before use, check compatibility with the surface in an inconspicuous area.

In 1983, the company Walter Maringer, Werkzeughandel was founded as a sole proprietorship. At that time, we had nothing but a lot of self-confidence and ambitious goals. The Company Due to rapid development, the sole proprietorship was restructured after two years, and on December 13, 1985, Walter Maringer GmbH Spezialwerkzeuge und Schleiftechnik was established. The continuous growth made it n...

... spatter (steel, stainless steel, aluminium, etc.) No silicone, non-flammable and biodegradable. Laser-Lotion PROTEC LC20A ensures increased quality by preventing spatter, providing dry and clean metal surfaces, no reworking required, as well as higher productivity of the laser system as the beam moves more easily following penetration. Another customer benefits are reduction of cleaning efforts...

...After a pickling treatment, optimal preparation for zinc phosphating follows. This ensures perfect paint adhesion. We prepare your component perfectly for later painting. In the immersion process, a conversion layer of zinc phosphate is built up, which provides very good corrosion properties. 1. Cleaning. 3-stage degreasing in immersion and spray processes, followed by pickling to remove rust...

...The ancestors of today's cleaning chemicals were mostly highly alkaline and heavily enriched with complexing agents. We are constantly developing special compounds for specific problem-solving.

... and sweat are easily wiped off. Silky Liquid– Innovation from GREEN CLEAN for fine Technics Features. Careful cleaning and long-lasting surface protection SILKY LIQUIDE is fast acting lifts dirt and simultaneously smoothes the surface structure leaves the surface dirt-repellent facilitates easier follow-up cleaning leaves a noticeably smoothens surface no effect on spectral light transmission causes no aberrations or distortions Antistatic surface effect Surface coatings are not affected Non-Flammable and Bio-degradable Silky Wipe– tried and tested for years in photography and...

... well as mercerizing and cleaning agents in the textile industry. The increased use of LABSA increases the surface area of distempers. This is why it is used as a wetting agent and an emulsifier. CAS Number:85536-14-7 HS Code:290410...

...Simple action that combines spraying with product diffusion, making the material effective in any situation - The lemon scent reduced the common odor of chemicals - Made of HDPE with eco-friendly packaging - Can be carried in hand luggage at airports - Protective and disinfectant effects that last up to 10 days. - Can be used on any surface - Contains no alcohol - Completely biocompatible - Reduces the need for constant cleaning by 50%...

...With two microfiber surfaces - soft fringes for regular cleaning and non-scratch fabric for extra tough cleaning. One-size glove with non-slip, elastic cuff. Microfibers clean and lift dirt and moisture, while regular fibers push particles across the surface. Minimizes scratches and swirls by loosening dirt and particles. The microfiber fabric is ideal for removing stubborn dirt, insects, and tar residues. Soft, gentle, non-scratch, and lint-free. Safe for all vehicle paints and bodies.

...The cleanroom tools are manufactured in Germany from a single piece, meaning the surface cannot chip or flake. This results in a reduced product risk. The products meet the requirements for sterile cleaning and are autoclavable. Application cases can be found in microelectronics, pharmaceuticals, the food industry, automotive, or in hospitals.

...The latest generation in conveyor belt technology. These belts have been developed to address the key conveying issues across various industries, particularly in the food sector. They are made from materials that are resistant to cuts and abrasion. This significantly reduces surface damage, preventing bacteria from settling. The easy belt cleaning saves labor costs and thus reduces production...

...All screening machines are equipped with a safety switch; the safety of the products complies with Directive 89/392; the product-contacting parts of the vibrating screening machines are made of stainless steel. The noise level of all vibrating screening machines listed in this catalog is below 70 dB(A). When using a cleaning system with rings, the noise level is below 75 dB(A). Surface treatment according to class 2B, electrical installation in protection class IP65.

...Thanks to hygienic design and a surface resistant to alkalis and acids, these stainless steel gearboxes almost clean themselves. Always a clean solution. Use our stainless steel gearboxes in areas that require intensive cleaning. You save time on surface cleaning while simultaneously implementing a highly efficient gearbox in your application. The special housing design made of high-quality...

...Cleaning sprays, degreasers, specialty sprays, corrosion protection, release and lubricating agents, surface coatings, silicones, marking pens, crack testing,…...

... - Savings on the conventional smoking process - Very good caliber accuracy for high precision when slicing - Ready-to-fill casings and "all-in-one process" for high product safety - Environmentally friendly and budget-friendly - No complicated cleaning of the smoking chamber - No costly neutralization of the cleaning water Caliber Range: From 49 to 165 mm Smoke Transfer: B2 Medium smoke tone -> Cooked sausage and poultry ham H5 Dark smoke tone -> Cooked ham H6 Very dark smoke tone -> Cooked ham Caliber Range: 49 to 165 mm...