air spray gun

...For widespread application For stubborn contaminants Very efficient CO2 snow particle generation Gentle dosing into the compressed air For manual blasting work Adaptable to all robots No ice formation due to thermal insulation With CO2 quantity regulator...

...Professional spray gun bijet. Made entirely of metal with a rubber handle, this spray gun offers you either a rain or foam jet watering option. The dial adjusts the maximum flow rate, and the choice of jet is determined by rotating the collar. Particularly gentle on plants, the addition of air into the water stream prevents root exposure and does not compact the soil. Attachment to the hose is done via a quick connector. Made in France. REF:JARPISBI Main material: aluminum Other material: stainless steel Made in: France Width: 11 cm Height: 17 cm Net weight: 500 g...

...Blow guns, blow-off valves, spray guns, professional cleaning guns, and specialized air and liquid guns are all part of the RIEGLER product range, along with hand tire inflators, hose clamps, sealing materials, and various supply units. With RIEGLER industrial adhesives, sprays, and sticks, you are always on the safe side.

... can choose from 16 different dilutions ranging from 0.5% to 12%. • Connection between the gun and the washing hose. • Operating pressure between 2 and 6 bar. • 2 models: for 1 product or for 2 products. The model for 2 products comes with a spray lance and a PVC lance without a nozzle. 801.000.100 - 10 m hose – 60 cm lance 801.000.200 - 15 m hose – 60 cm lance 801.000.300 - 25 m hose – 90 cm lance 801.000.302 - 25 m hose + telescopic lance 2 x 1 m 801.000.

...Spray Coating In spray coating, high-quality industrial paints are atomized using a spray gun and compressed air (2 to 6 bar) as they exit a nozzle. This method is used for small and flat parts. However, it has the disadvantage that paint loss (overspray) is relatively high. This method remains the most common technique for workpiece coating and offers not only good corrosion protection but also...

...Blasting Gun "POWER-SHOT" Type 100 with Air Nozzle (Blast Nozzles optional)...

...Control of 3/2-way valve (G 1/4), Air pressure 4-6 Bar, Air connection G 1/4 - 8/6, Paste pressure 4-6 Bar, Paste connection LW 13, Dosage amount 1.5-4 cm³...

..."Made in Germany" HVLP Spray Gun ABAC PN 2A for ABAC SG90, SG2000 and SG2500 HVLP Paint Spraying Units, with Continuous Air Supply, 3 Nozzles 1, 1.5 and 2 mm Dia, 0.7 l Anodized Aluminum Paint Container, Nozzle Spanner Manufacturer: Geheit GmbH (ex CHIRON) Box Size: 37x17x12cm Weight:1,2 kg...

...please avoid changing the angle frequently. When the spray gun is in use, please do not loosen the Air cap. When changing direction of Air cap, Air cap itself shall be turned without loosening the Air cap nut. Fluid viscosity shall be less than 30sec by using V-1 model viscosity cup. Fluids with high viscosity may result in less ejection amount.

...It is the ideal automatic spray gun for paint applications in mass production processes in industrial sectors. Compared to alternative products, its air consumption is 75% lower due to TEC's technological structure, providing energy savings for businesses while ensuring optimal paint application efficiency and quality.

... for quick color changes. With low-pressure spray gun, color changer, and pressure containers. One container is used for supplying the cleaning agent. Spray system with automatic spray device, lifting mechanism, material pressure vessel with compressed air stirring device, filter pressure regulator, and solenoid valve for control air.

...). Never dust off the primer. Provide suitable elastic sealing systems to cover joints, fittings, cracks or fissures subject to significant movements. Pure polyurea Syntech Poliurea Spray - FL requires a bimixer system capable of producing pressure above 180 bar and temperatures above 65°C. Contact Azichem technical staff for clarification on the best gun to use and details of the system air. From 2,00 to 2,50 kg of SYNTYECH POLIUREA SPRAY - FL for each square metre of surface to be covered. Barrel 225 kg [A] - Barrel 205 kg [B] - Kit: 1 Barrel 225 kg [A] + 1 Barrel 205 kg [B]...

... to mold, moisture, and UV light - Fluoresces under UV light for easier inspection - Wide operating temperature range (>+16 °C and <75% relative humidity) - Good dielectric properties - Can be safely soldered without the release of toxic gases - Can be completely removed with Ultrasolve - Certified according to UL The silicone can be applied with a brush, by dipping, or with a spray gun and air...

...Paint Module Simple : compact and modular extraction booth delivered in kit form for spray painting or liquid product application with a gun. The Paint Module was designed by Technicis Filtration, with the aim of providing a compact and modular extraction booth suitable for painting or spraying work on small to medium-sized parts. The Paint Module is ideal for spray application of liquid products...

...Water-based, thixotropic or drip-resistant rust protection primer based on acrylic dispersion for indoor use. Excellent rust protection for iron and steel. Aqua-Multiprimer PRO Spray White Special Features French Regulation DEVL1104875A on the labeling of construction coating products regarding their emissions of volatile pollutants: A+ Application Method Airless Airless air-assisted (Airmix, Aircoat, etc.) Cup gun...

... gun used. It is equipped with a glass dial gauge to prevent damage risks associated with solvents or other thinners. New "aquabase" paints are highly sensitive to contaminants such as water, oil vapors, and micro dust. Activated carbon provides the optimal treatment for these aggressors, reducing them to a residual level of 0.004 mg/m3 of air.

...ALWA release lacquer (art. no. 9510000) is used to release patterns and moulds. ALWA release lacquer is applied in a thin coat with a brush or a sponge. A thin coat of ALWA release lacquer can also be sprayed on with a conventional spray gun. We recommend to spray on approx. 2 to 3 layers. After approx. 20 min. a strong release film is formed. The drying process can be accelerated by hot air.

...The Short 110 model is one of the most well-known devices among users. It consists of a special pressure-fed spray painting device that operates using the compressor it is equipped with, which pressurizes (max 3 Bar) the tank from which the product is drawn. As the material reaches the airbrush, it mixes with the compressed air, also supplied by the compressor, at the nozzle to optimally atomize...

...High-output air gun with low exit pressure. It allows for a reduction in the number of steps dedicated to pigmentation treatment.

... on the viscosity of the chocolate mixture. Double action gun, round spray - Supplied with a stainless steel cup. Compatible with our plastic cups: Plastic cup 120cc available (Ref.CH74P) Large plastic cup 200cc available (Ref.CH74PA) You can use this chocolate gun to spray cocoa butter, mycryo, chocolate, or to grease your molds. You can use our Velvet Lacquer coloring range to give a velvety effect to your creations. Reference: CH60PI In stock: 293 Products...

...The paint spray gun features excellent spray pattern thanks to innovative injector technology. - Excellent spray pattern thanks to innovative injector technology - All standard nozzle sizes with matched pre-atomization nozzle - Optimal adjustment options, thanks to unique separate round/flat spray regulation - Fatigue-free operation due to extremely light trigger force - Adjustable material...

...The new version of the automatic Airmix® spray gun ensures high level performance with unsurpassed finish &amp; excellent atomization quality. Description High transfer efficiency (up to 86%*) Excellent atomization quality Modular design &amp; high reliability Performance Dual spring mounted outside fluid passage allows you to open air before atomizing fluid for better spray fan quality VX24...

...Elimination of annoying and health-hazardous spray mist formation Material savings of up to 50% depending on the spray material Savings in labor hours for cleaning machines, booths, etc. Adjustment of flat and round spray patterns by simply rotating the spring-mounted air head A pressure transducer built into the pistol body Installed wiper ring instead of packing gland as needle seal Material quantity adjustable by more or less retraction of the needle Needle actuation is pneumatic Retraction of the needle automatically supplies atomizing air...

...It provides cleaning without brushes, sponges, or scratches during the exterior wash of your vehicle. The brushless foam spraying pump operates with a pressure range of 3 bar to 6 bar, and after filling the mixture into the machine, close the valve. The air regulator on it will cut off the airflow once sufficient air has been filled. When you see the working pressure (3-6 bar) on the manometer, the machine is ready for use. It is very practical; it sprays the chemical placed inside in foam form with the help of air. Thanks to its trigger gun, you can use the foam effectively and efficiently.

...Nano spray gun, sterilization at room temperature, very fine water mist, no residue Using dual-core processor, independent boost charging technology, powerful performance, long-lasting stability To achieve nano-level atomization output, custom-made high-pressure air pumps and siphon atomization nozzles above 5000 rpm The spraying distance can be up to 1.5 meters, and it can be sprayed directly on the surface of the human body, fabrics, home appliances and other objects without the feeling of being wet.

... Connection value: 20 KW Machine dimensions: 2,280 / 2,800 mm (length of booth) The sophisticated spray gun control minimizes the rate of overspray. With the patented V-belt design up to 98 % of the liquid overspray can be reclaimed. The paint retrieved in this way is recycled into the paint process. Over and above, the innovative ventilation system improves the ecological energy balance. The short...

...SCHÜTZE 2-K-spraygun two-component-spraygun Supply of both components directly into each sprayhead. Supply of atomizing air and control air via gun body. Only one trigger. Mixing within spray jets. Mixing ratio can be regulated individually. available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5 mm ø flatspray or roundspray pattern depending on aircap, all material leading parts made from stainless steel. For glues special nozzle sets (KLS-version) available. weight: only 490g...

... saw blade feeding 90 degree of notching operation (optional) STANDARD ACCESSORIES • 2 x T.C.T saw blades, Ø 420 mm • 2 x Horizontal pneumatic clamps • Service spanner • Air gun • Spray saw blade lubrication system...

... operated with a high-pressure gun (up to a maximum of 60 bar, adjustable). The unit also features an air blow gun for blowing off components. A large viewing window is installed on the front of the lid, and there is LED interior lighting on the top of the lid. A candle filter is integrated into the pressure line of the high-pressure pump, which continuously filters the medium.

...manometer and pressure regulator for blowing air manometer and pressure regulator for oil pressure filling opening relief valve safety valve connection for 1st gun holder for wide spray gun connection for 2nd gun Oiling of concrete formwork Spraying of baking sheets Sprayers in all variations.