air intake systems

... filters, and products in which this method is implemented are indicated with Eurovent 4/11 certificate located thereon. Our Eurovent certified products protect your health and the environment while allowing you to save money. Our high technology pulse and static air intake filters preferred by well-known gas turbine manufacturers are ideal under harsh environmental conditions. We provide filtration solutions with negligible turbine fouling and maximized turbine heart rate and also offer solutions for coastal and offshore applications against the highest humidity conditions.

... meet all needs, from the simplest to the most complex, both NO ("normally open") and NC ("normally closed"). The regulators are designed for different operating systems: - NR, meaning Non-Return - PM, meaning Proportional for Motor Compressors, a "fully pneumatic" solution - E, meaning ON/OFF, a flow regulation system that alternates between full load operation and completely empty operation - P, meaning a hybrid system, halfway between the ON/OFF system and PM...

... maximizing the air-water contact zone. The AER-AS is easily adaptable to nearly any basin configuration. With a lengthened intake cone section, the AER-AS can penetrate water depths up to 8 m. This allows the unit to draw activated sludge of low oxygen concentration from the bottom of the basin to be transformed into an oxygen-rich surface discharge. Easy to install, robust and reliable, the Aquaturbo AER-AS ensures efficient aeration and mixing for years of maintenance free service.

... bacteria Ozone free and low power usage for sustainability and cost efficiency Laboratories, dentists, doctors, ophthalmologists, chiropodists, care homes, hair salons, beauty salons, universities, schools, offices, hotels and much more. Innovative design with 360° air intake. The ap360 is designed to create clean air in more enclosed spaces, together with optimal efficiency. The air intake system...

...Box Cooler is a water cooling system for boats. It consists of a U-shaped tube bundle located at the sea inlet on the side of the vessel. This design makes it an ideal space-saving solution for the engine room. The sea inlet is equipped with intake and discharge grilles. The cooling seawater enters through the intake grille and is channeled along the U-shaped tube bundle to the discharge grille, thereby cooling the water inside the tubes. The cooling effect is achieved through forced circulation of the seawater when the vessel is in motion or by natural convection when it is stationary.

...Proven two-wing blower technology for plant construction for forced transport in high vacuum up to 80% vacuum. Oil-free and extremely robust. Available as belt or direct drive. Volume flow: 60 to 50,000 m³/h Negative pressure: -800 mbar Transport medium: Air and neutral gases...

...For medium to large systems. A lightweight, non-corrosive open circuit cooling tower: process industry professionals and HVAC operators can rely on its various versions and ease of transport and installation. Ease of access: Completely removable walls for easy and total access to internal components. Certified performance: K12 version with certified performance primarily for the HVAC sector. Noise containment possible: Sound-absorbing devices at intake and discharge available upon request.

...Many of our soundproofing systems require controlled air intake or exhaust, or the use of climate control technology.

...). Note: Typically, silicone oil greases with PTFE can lead to explosive decomposition reactions in conveying systems with high pressures and air inclusions. Air intake, rapid pressure increase, and high pressures should be avoided through appropriate design. Vent the entire system before commissioning! This is a special product that can be individually produced for you upon request. Minimum quantities may apply. Just contact us.

...The search for solutions in the field of process engineering systems and methods presents us with new challenges every day. Electric heaters for the direct thermal treatment of incoming air in air conditioning systems or as preheater or afterburner for intake air in industrial equipment using intelligent processadapted control systems are gaining an increasing acceptance...

... intake and/or air mixing sections, filter sections, air heater and air cooler sections, humidifiers, and ventilators, it is possible to create tailor-made units serving different design purposes. It is also possible to make double deck executions with or without heat recovery units.

...RAW/E liquid coolers (water, water/antifreeze) operate through a closed circuit, consisting of a finned coil crossed in countercurrent by ambient air. Due to the sizing of the coil, it is possible to achieve process fluid temperatures close to the temperature of the intake air. They are industrial chillers designed for fluids between 0°C up to 70°C, with external temperatures between -10°C and...

... pipes in the tank, the connecting parts between the fuel tank and the suction system, to the intake, flushing, and return lines to the activated carbon filter. According to customer specifications, corrugated pipe/multilayer systems with integrated valves and pre-assembled quick connectors are developed to ensure safe operation and a tight connection. The systems are flame-resistant and temperature-resistant up to 140°C and offer high mechanical strength.

... up to 16 air changes per hour on-site. This system can be installed parallel to an existing system or connected to the fresh air intake to provide additional fresh air (either cooled or heated). Return air systems – if return air systems need to be applied, we can supply MERV or HEPA filters on the intake side of our AC units or air handlers.

... chamber temperature and humidity and compensates for changes in ambient lab conditions SmartLight Monitor TM verifies that correct light capsule is installed Filter combinations available to meet all common test methods Air intake dust filter CS-7 xenon lamp cooling system Chamber viewing window in door Universal electrical configurations to meet local frequency, voltage, and electrical requirements...

...Compressed Air Vacuum DDS 129-6-31-Reclean-H-AS The compressed air vacuum DDS 129-6-31-Reclean-H-AS-EL – suitable for ATEX zones 22 and 21 – impresses with its elegant design and very high material quality. A powerful compressed air vacuum from DEBUS, designed for vacuuming dry dust. A true DEBUS industrial vacuum cleaner in proven Made in Germany quality! Technical Data: Intake Air: 440 m³/h...

...The PURIFIAIR.620 air purifier from asecos effectively contributes to reducing pollutant levels indoors with its multi-stage filtration system. The dual-sided air intake ensures that the combination of EPA E12, HEPA H14, and activated carbon filters captures even SARS-CoV-2 viruses safely. The PURIFIAIR.620 air purifier offers the following advantages: ››› The mobile design allows for flexible...

...Compressed Air Ice Prevention Systems (Air Bubble Systems) Protection of marinas, ferry docks, navigation channels, locks, and water intake structures against ice damage Ice prevention systems provide reliable protection against ice damage to hydraulic structures. For example, bubble curtains can be used around docking bridges in ports to protect the structure from ice pressure during winter. The installation and operation of such bubble curtains is generally much more cost-effective than constructing winter-proof docking bridges.

...Gearboxes, Sealing of engine covers, Sealing of the oil filter, Air conditioning systems, Bonding of the main headlight, Sealing of air filter housings, Electrical parts, Electronic parts, Components of ceramic cooktop plates...

...RF-SE Filter Material: Synthetic Fiber Filter Efficiency (EN 779): G3 / G4 Filter Class (ISO 16890): ISO Coarse 60% / ISO Coarse 65% Dimensions: Available in rolls or cut pieces Color: White / Blue & White Final Pressure Drop: 250 Pa Operating Temperature: 80°C Application Areas Used as a dust-retaining pre-filter in ventilation devices, air conditioning systems, and clean air intake systems. Advantages High dust retention capacity and low pressure drop with advanced fiber structure Suitable product variety for all weather conditions...

...Color mist extraction station with pre-assembly and lighting An intake system draws in fresh air and blows it into the interior of the spray booth through fine filters. At the same time, the explosion-proof exhaust unit sucks in the booth air and the overspray, directing it through the dry filter units to the outside. The dry filters capture the sticky paint particles, and the cleaned exhaust air can then be expelled through the roof. Due to the constant need for fresh air, there is an increased demand for heating energy to warm the intake air, especially at lower temperatures.

...The RCDC ACC is designed with optimized key sections and equipment to guarantee a maximized efficiency. The steam flows from the turbine into a steam duct and several manifolds to reach the fin tube bundles. The RCDC ACC is designed in streets sitting on a steel leg system (under structure) raised to allow proper air intake into the forced draft modules of A-shape steelframes supporting the fin...

...The machinery is equipped with a COMPRESSED AIR TANK with solenoid valves for filter cleaning. There is a FAN FOR DUST EXTRACTION, a VENTILATION CHIMNEY, and a VENTILATION BASE. The filter consists of a metal box divided into two sections: one for the intake of dusty air and the other for the discharge of clean air. Both the intake of the air to be purified and the outlet of the purified air are located at the top.

...INDUSTRIAL AIR CONDITIONING SYSTEM Application: FOOD INDUSTRY Technical characteristics: annual air conditioning system serving packaging departments with control of temperature, humidity, and pressurization air treatment unit with the following construction features: - intake fan section - pre-heating battery section - cooling battery section - post-heating battery section - evaporative...

...Photo4CTB is designed for the automotive sector, both public and private. It comes equipped with a power inverter for converting current from 5-12V or 24-30V to 230V. Photo4CTB utilizes PCO technology (a photochemical reaction that generates hydrogen peroxide molecules capable of destroying pollutants present in the air and on surfaces). A filter positioned at the air intake, coated with titanium...

...Suitable for multiple products (except for leafy vegetables).Decrease in the product temperature by several tens of degrees according to the ambient temperature. Low water consumption, respect for the product and the environment. Possibility of filtering the air intake to the cooler. Capacity:500 kg/h to 15t/h according to the unit weight of the products processed and the model.

...Compact radial fan with high flow rates without belt drive for installation in heating or air conditioning systems. Areas of application: Heating fans and air conditioning units, heat recovery, airbox fans, and the gastronomy sector. Construction: The housing is made of corrosion-resistant, galvanized steel. The low-noise, galvanized impeller with double intake generates high air volumes at low...

...Compressor filter in a stable, round design as a pocket filter. The filter for cleaning the intake air for stationary compressors or compressor stations.

...Medium and high efficiency filters M6-F9 specially designed for air intake in air conditioning systems.

...Bases Exhaust diffusers Plenums Inlet Ducts Exhaust Ducts Exhaust Casings Inlet Collectors Exhaust Collector Air Intake Manifolds for gas turbines Piping Vessels Small high alloy parts...