reinforced concrete

...Core Drilling in Reinforced Concrete Conventional core drilling typically generates a lot of dust. In new construction, this is not an issue; however, sometimes work is carried out in existing living spaces or workplaces. In such cases, we use a special collection system at the drill crown to capture dust and water directly, allowing us to work as cleanly as possible. Our drilling operations are applicable in solid materials with diameters ranging from 10 to 750 mm and can be performed horizontally, vertically, and diagonally. Upon request, larger diameters and overhead drilling are also possible.

...Reinforced concrete mats, also known as construction steel mats, can be supplied by us as storage mats, list or drawing mats, and stirrup mats. These reinforced concrete mats are sourced exclusively from manufacturing plants that are subject to quality control according to DIN 488-6. All reinforced concrete mats can be cut and/or bent according to your specifications.

...The precast reinforced concrete cover slabs are designed for trafficable edge paths in tunnel construction. Precast reinforced concrete cover slab for trafficable edge paths in tunnel construction. The edge path covers are intended for use with motor vehicles (trucks) with a wheel load of 25 tons. The factory-installed intumescent laminate strip for fire protection protects the installations in the cable trough from fire exposure.

Loiseau Industries specializes in the distribution of sealing gaskets, with a wide range of products in stock: Flat gaskets – O-rings – Molded gaskets – Machined gaskets – Metallic gaskets – Spiral gaskets – Gasket kits – V-Ring – Cord gaskets – Rings – Braids for industry – Foam strips – Bellows – Rolls. We position ourselves as a key player in the distribution of sealing gaskets, offering a vas...

...Formwork for pillars and bridge beams plays a crucial role in the construction industry, especially in the realization of bridges and other large concrete structures. With customized solutions, complex architectural designs can be implemented while ensuring structural integrity and safety. Customized formwork systems for bridge pillars offer numerous advantages for construction professionals. They not only allow for precise adaptation to the specific requirements of each project but also enable efficient and time-saving construction processes.

... pedestrians and cyclists. Made from galvanized metal sheet with an antislip/drop plate design, it is available in standard catalog sizes or can be customized to meet specific customer requirements, providing a reliable solution for safe and efficient drainage. The Reinforced Antislip Cover with Flat Frame combines robust construction with innovative design, offering a safe and efficient solution...

İLK İHRACAT AŞ specializes in joint export activities within the Turkish metal industry. We offer almost every type of metal material, processing services, and products. Our metal processing services include laser cutting, plasma cutting, water jet cutting, gear manufacturing, CNC bending, machining, and furniture design. We work with nearly all types of metals, primarily carbon steel, stainless s...

EDER GmbH is a company specializing in steel production and distribution, exporting high-quality steel products as well as auto parts and tires, and offering comprehensive logistics solutions. Additionally, we provide an extensive tire trading service that includes tires for passenger cars, trucks, and construction machinery. This also encompasses used tires, tire containers, and a comprehensive s...

...Underground garage cleaning Concrete restoration with the creation of static substance Maintenance of surface protection systems with crack treatment and injection Control inspection according to maintenance plan...

...Construction, manufacturing, transport, and assembly of precast concrete components for both track scales and combined track/vehicle scales with usable areas up to 20 x 3.50 m, as well as custom solutions.

...Withstands even the highest loads Reinforced concrete construction has numerous advantages, as it impresses with its enormous tensile strength. Its high stability and tensile strength are based on the embedded steel reinforcement, which optimally distributes the load. This allows reinforced concrete to easily withstand even the highest demands. Our focus in reinforced concrete construction is on the construction of • Retaining walls • Balconies • Stairs • Columns...

Jücker is firmly rooted in the triangle of Ems-Rhein-Ruhr – as a family, as an employer, as a business partner. We are committed to the everyday tasks of medium-sized enterprises just as much as to the prestige projects of large corporations. Our customers from crafts, construction, and industry can expect professionalism and precision – and additionally benefit from dedicated premium service: We ...

...Fiber-reinforced concrete is an alternative to traditionally reinforced concrete with welded mesh. It is strengthened with calibrated metal fibers. The fibers are mixed directly during production at the plant to ensure a homogeneous mixture. Fiber-reinforced concrete reduces the risks of poor execution (incorrect placement of the mesh, insufficient overlap, incorrect height, etc.). It is a fluid and pumpable concrete.

...Edisis is a structural software aimed at the design of multi-story reinforced concrete buildings. The seismic analysis is conducted according to the methods prescribed by the new Technical Standards for Construction Ntc18, but it also supports Ntc08, Eurocodes, Ntc96, and the Moroccan standards RPS/2011. It allows for analysis under static loads, linear dynamic or static seismic analysis...

We are Europontex, an independent agency established in the Portuguese market for three generations, since the early days of steel trading in Portugal. With a solid experience over time and a constant business intelligence activity, we have developed a deep understanding of the market and the products. We have expanded our horizons beyond borders, serving not only the domestic market but also nei...

...Drilling of all diameters and thicknesses and cutting in reinforced concrete with diamond machine...

...Giatec XCell™ is a probe connected to a tablet dedicated to the rapid, precise, and efficient detection of corrosion in reinforced concrete structures. Its advantages: - Rapid corrosion mapping (half-cell) - No maintenance required for the electrode - Very fast measurements (a few seconds) - Ergonomic and ultra-lightweight system - Analysis application on Bluetooth-connected tablet...

...Fiber-reinforced concrete is an alternative to traditionally reinforced concrete with welded mesh. It is strengthened with calibrated metal fibers. The fibers are mixed directly during production at the plant to ensure a homogeneous mixture. Fiber-reinforced concrete reduces the risks of poor execution (incorrect placement of the mesh, insufficient overlap, incorrect height, etc.). It is a fluid and pumpable concrete.

...Food Sector Construction provides all aspects of reinforced concrete works for construction and maintenance purposes. We are experts in the installation of it in a variety of circumstances ranging from factory flooring to external yard work.

Örnek Elmas Testere San. ve Tic. Ltd. Şti was established in 1980 by Prof. Dr. Nedim Örnek. Over the years, the company has established itself as the leader in the manufacturing of diamond tools for the concrete and stone industries. Operating in the Dilovası region of Istanbul under a 6,000 m² closed factory, and with a team boasting 40 years of experience, Örnek Elmas has reached all parts of th...

...EC Certificate. For pumping all glass fibre reinforced concrete mortars such as: precast concrete, low flow decorative mould casting, etc.

...drilling machine for wet drilling with a diamond drill core drill or diamond crown drill in stone, concrete, and reinforced concrete...

...It concerns the production in industrial plants and the assembly on site of prefabricated structures in normal or prestressed reinforced concrete. Code: OS 13...

...• For securing rebar for reinforced concrete with splice wire from a roll • Twist and cut wires in a single operation quickly, reliably, and economically • The edges are additionally induction hardened • Plastic-coated handles • Made of tool steel, forged and oil-hardened Length in millimeters: 250 Weight in grams: 395...

... render it extraordinarily effective in reinforcing structural elements in reinforced concrete and masonry. Adhered to the inside of caissons, confined within cavities or spread out over the extrados of foundations and lofts, Rinfor Grout Col allows for low thickness structural reinforcing, substantially devoid of additional metallic reinforcement. Rinfor Grout Col belongs to the HPFRC (High Performance...

...meeting the most rigorous demands of modern construction. The unique advantage of the PSC60 model is the application in projects that entail a constant volume of concrete within a long period of time. The infrastructure tasks performed with this plant, from roads and bridges to the construction of vast buildings, will be backed with the necessary reliability and efficiency to hold the project to its deadline. It is stationary in its design, making it possible to be installed in only one spot, which is ideal for long-term construction projects.

...steel fibers with hooken end for reinforced concrete 1/50 (0.9/60) mm EN 14889-1 with hooken end in cartoon box 25 kg. One truck 21,350 ton net (22,250)...

...The company is certified as a steel processing center and offers suitable solutions for civil and industrial construction. We perform flame cutting on beams and produce brackets, angles, and other elements using our bending machine with rods ranging from Ø 6 to Ø 24. We also work with iron to provide all reinforced concrete structures (foundations, columns, slabs, beams).

...Our concrete pipe machine is hydraulically lubricated. It produces concrete pipes ranging from 300mm to 1200mm in diameter. Each mold consists of an inner mold, outer mold, a sleeve, a sheet pallet, and a fiber head. With this machine, we can manufacture integrated gasketed or rainwater concrete and reinforced concrete pipes according to customer demands, with heights ranging from a minimum of 1000mm to a maximum of 2000mm.