polyethylene tubes and pipes

...Tubofuro produces polyethylene pipes for water conduction. High-Density Polyethylene Pipe PE 80. High-Density Polyethylene Pipe PE 100. Low-Density Polyethylene Pipe.

...Perforated Polyethylene Tubes Used in Air Ventilation and Climate Control Systems...

...Highly wear-resistant Especially resistant to chemicals High abrasion resistance PE 1000 / PE UHMW Ultra-high molecular weight polyethylene PE 1000, also known as PE UHMW, is particularly abrasion and wear-resistant and offers good impact toughness. Additionally, it is resistant to corrosion and numerous chemicals. This material is used in various fields, including mechanical engineering...

...The transformable plastic wire is made from purified polyethylene (PE). It is eco-friendly, recyclable, and safe to use. The wire is 100% polymer. Compared to metal blend wire, it is more stable and can be properly recycled during processing. Additionally, the wire is flat-shaped, with high forming and processing capabilities. It can be bent, shaped, and transformed without deformation at will. The magical transformable plastic wire can surely serve as a substitute for coated metal and metal blend wire. Our plastic wire complies with Japanese safety specifications and will not puncture the...

...MULTILAYER PIPE PE-X(B)/AL/PE-X(B) IN ROLLS AND BARS. EuroPex is a pipe made up of five layers. By combining the advantages of a metal pipe with those of a plastic pipe, it eliminates the weaknesses of both materials. The core of EuroPex is a longitudinally welded aluminum pipe. The inner and outer layers are two distinct pipes, both made of Cross-Linked Polyethylene (PE-X "b"), with a minimum...

...Corrugated Polyethylene Tube in Rolls Double-Walled for Systems OUTER: BLACK INNER: GREEN...

Established in 2020, Kayadereli Construction is based in Adana, Turkey. We offer a wide range of products to our customers in the export of fresh fruits and vegetables, construction equipment, and building materials. Since our foundation, we have aimed to expand our network based on furnishing the best service to our customers. Our company, together with our expert team, creates quality standards...

...tufa, etc., which are crossed by passing electrical cables and/or technical tubes in general (gas, plumbing, etc.). Dust, soil, sand, loose parts, rust, and layers of paint of the pipes and old deteriorated sealant material must be removed with pressurised water or brushing, before applying the compound. The inner surface of the tube/hole containing the passing cables should be damp or wet. To...

... Roflex. The basic characteristic of the insulation tubes for pipes and pipelines is elasticity and good resistance to the mechanical and chemical actions of common construction materials. The insulation for pipes and ducts has a closed cell structure and can be incorporated into all types of floors. Specifications: Color: Graphite Grey; Name: Polyethylene Pipes or Polytubes; Use: for drinking water networks, natural gas, telecommunications, sewerage, jacket for pre-insulated pipes used in the transport of thermal agents, irrigation and other fluids.

...Reasons why Polyethylene Hoses and Pipes are More Preferred: Hoses and pipes made of polyethylene can be used safely in very high temperature ranges such as -50 °C to +60 °C. Since it does not interact chemically with water, it does not affect the appearance, taste, or smell of the water. For this reason, it is the most preferred type for water transportation. Polyethylene hoses and pipes are highly resistant to acids and alkalis. They are only damaged by nitric acid. Polyethylene has a lifespan of at least 50 years.

...Louver Plugs for Round Tube, Square Tube, Rectangular Tube, Oval Tube These louver plugs for round tubes, square tubes, and oval tubes made of plastic are used as pipe closures, sealing plugs, and for covering holes. Material: Polyethylene, Standard colors: black, white, silver-gray Special colors, custom sizes, and designs of louver plugs/round tube plugs available upon request. Now also available with printing using the pad printing process! Many more louver plugs, pipe sealing plugs, pipe end plugs, and pipe closure caps made of plastic in various designs and sizes.

...All the necessary materials to set up your own irrigation system, whether in gardens or agricultural estates, as well as all types of polyethylene pipes and accessories, automatic timers, irrigation sprinklers, and filters. If you need an irrigation installation for your garden or farm, do not hesitate to contact us; we will provide you with advice.

... during diameter selection in project planning. They are suitable for underwater installation and are not affected by seawater and marine movements. There is no installation waste due to the joining methods. They are resistant to UV rays. They are not affected by harmful substances present in the soil that cause erosion. Therefore, cathodic protection is not necessary. They are resistant to chemical substances. PE 100 pipes do not alter the smell or taste of water, making them suitable for health. It is impossible for plant and tree roots to enter polyethylene pipes.

PPRC Pipes and Fittings, a manufacturer of PVC pipes and fittings, is one of the leading companies in the PP-R and PEX Pipes sector. Since its establishment in 1992, Plastherm has adhered to the principle of not compromising on quality at all stages, from production to reaching the final consumer, and offers more than 350 product varieties. Facility and Product Variety Plastherm produces and mark...

...1. The PERT compound -type II of grade GS RT-221 could be used for the production of both 3-layer and 5-layer hot water pipes. GS RT-221 is compatible with the GS ASD-111 bonding layer adhesive, which is an oxygen barrier compound based on ethylene vinyl. 2. The peroxide-based, single-component formulation, packaged without vacuum due to its insensitivity to oxygen and moisture, the lack of need for post-curing, and the design for high-speed inline production are the main strengths of this product. The PEX_a compound, grade GS XA-25, is compatible with the Tie layer adhesive of GS ASD-111.

... using pre-insulated ductile iron pipes. General Design:ISO 2351 TS EN 545 EN 598 Pipe Socket and Gasket:DIN 28603 EN681-1 Flange Sizes:EN 1092-2 / ISO 7005-2/ BS 4504 / DIN 250 Internal Coating:ISO 4179 External Coating:ISO 8179 Polyethylene Coating(Optional):ISO 8180...

...Suitable for square tube with a section of 16 x 16 mm to 60 x 60 mm Quality plastic (low-density polyethylene) The plastic end cap with wings for tubes is very easy to use and will provide an undeniable finish to your construction and metalwork projects. Note: The thickness of your tubes must match that of the chosen end cap. For more information, please refer to the dimensional table. Reference: CFEMBN1616 Section: For Tube 16 X 16 Mm To 60 X 60 Mm...

...Safe - Fast - Easy, these are the outstanding features of the KURO PEHD underground pipe program. The only completely waterproof pneumatic underground line that does not require a conduit, as the tubes are directly compatible with the special dimensions. Dimensions::NW 90 / NW 110 / NW 160 Standard Length::5000 mm Material::High-density polyethylene Color::Royal blue Custom fabrication:upon request...

...Immerse your industrial operations in unwavering reliability with our thick-walled PEEK tube, featuring an outer diameter of 360mm and an inner diameter of 250mm. Designed to withstand the most challenging environments, this thermoplastic tube excels in wear resistance, extreme temperature variations, and corrosive elements. Its robust construction ensures consistent performance, making it an ideal choice for demanding applications that require lasting durability.

...We can produce SSAW spiral welded steel pipes in the diameter range of DN200 - DN3000. We can manufacture them certified according to API 5L and EN 10217, EN 10219 standards. We also offer coating options such as Polyethylene, Epoxy, and Cement.

...-Wide selection of materials to meet any fluid conveyance requirement External diameters: -Sizes: metric: from 3mm to 22mm inches: from 1/8 to 7/8 -Polyethylene (LDPE or HDPE): for general use or with weak acids -Nylon (Flex Rilsan PA11 or Semi-rigid PA6): suitable for pneumatics or paints and solvents. -Teflon (PTFE or PFA or FEP): suitable for ultra-pure or highly corrosive fluids...

...+ Made from high-quality polypropylene raw material, resistant to impacts. + Used in Low-Density Polyethylene (LDPE) pipes of Ø16 mm, Ø20 mm, Ø25 mm, Ø32 mm (Flat Drip Irrigation Pipe). + Can also be used in Round Drip Irrigation Pipes with a wall thickness of at least 0.8 mm for Ø16 mm and at least 1.0 mm for Ø20 mm. + Can also be used as connecting parts for PVC Garden Irrigation Hoses of Ø16 mm, Ø20 mm, Ø25 mm, Ø32 mm.

... change in the specific electrical resistance of the soil -for electrical separation of aboveground sections of pipelines with a length of more than 1000 m from underground sections -a method for identifying pipeline sections that are affected by stray currents, as well as inductive AC guidance -at integrated gas and oil treatment plants, booster compressor stations or tank farms Advantages...

...High-Density Polyethylene Tubes...

...PE 100 Pipes Pipes Pipes Pipes Pipes Polyethylene 100 is currently the strongest and most pressure-resistant PE pipe material known. It has a thinner wall thickness and therefore a larger inner diameter compared to PE 40 and PE 80 pipes at the same operating pressure and diameter. This allows for the use of a smaller pipe for the same flow rate. The color of PE 100 pipes is blue and black. PE 100...

Plastherm; Plastherm is one of the leading companies in its sector that produces PPRC pipes and fittings, as well as PVC pipes and fittings. Since its establishment in 1992, Plastherm has adhered to the principle of maintaining quality at every stage, from product manufacturing to the final consumer, and offers more than 350 product types. Facility and Product Diversity Plastherm's production fac...

...Suitable for air-conditioning, refrigeration systems. Cu-Dhp 99.9% copper pipe insulated with an expanded polyethylene tube, closed cell and external LDPE foil. Maximum fire safety with self-extinguishing DIN 401-B1, SBI BL S1D0. Non toxic gases and resistant to external chemical agents and ultraviolet rays.

Famaplast, a company specialized in the manufacturing and sale of polyethylene protection tubes and sleeves. They come in all diameters, lengths, and colors for all types of cables.

...Plastic-Puglia is a leading international manufacturer with an 80,000 square meter factory and an annual production of approximately 50,000 tons focused on the marketing of high and low-density polyethylene pipes, as well as innovative and technologically advanced micro-irrigation systems. These products are the result of continuous research and development conducted in the company's laboratories...

Pipes and fittings made of PP and PE. Accessories and pipes for drip irrigation.