iron technical

... is easily identified using a scale for better repeatability. This is a manual tube bender for large diameter tubing, ideal for rolling and straightening tube or profile. It’s perfect for artistic blacksmithing and technical schools. Driven rollers: 2...

... steel, cast iron, and aluminum in various alloys; we also provide hard fabrics and plastics with and without steel cores. Additionally, we supply stainless materials. Standard timing belt pulleys or bearing discs are pre-produced - a finishing hole is added after technical clarification. The advantage lies in reduced costs and generally short availability.

... for technical coatings and as corrosion protection. Additionally, the variety of colors and gloss levels offers attractive possibilities for creating decorative surfaces. The powder coatings used are made from epoxy and polyester resins, which are applied in dry particles of varying sizes.

...Aluminum format sliding table with hardened steel guide rods. Large solid work table made of cast iron. ø190 mm table opening with under-table dust extraction. Electronic speed display. Milling stop ø180 mm. Built-in milling spindle locking. 4 speeds standard. Milling spindle tiltable to the rear. With integral stop 500 mm. 100% Made in EU (developed, built, quality tested) Technical Data...

... Vordergrund. During phosphating processes, the formability and the formation of an adhesive primer is of primary importance. The coating weight is usually in the range of 1 to 15g/m². Phosphatisations are especially resistant to lubricants such as oils or greases, and therefore well-suited to many technical applications. . Phosphate coatings are usually further coated. This involves: Oiling, soaping, lubricant coating, vulcanising and painting." ...

... •foundation nut is made of wrought iron recommended by European institutions for use at high shock loads in construction Shuttering telescopic props are designed to support horizontal shuttering liners when casting bridgings and use as temporary supports for fixing the horizontal elements during mounting and dismantling of various structures. Set of different height along supporting telescopic props allows performing in situ concrete works at any heights of up to 5.3 m. ...

...iron and aluminium panels; joints of all structural materials, and wall cracks Features A paint overcoat can not be apply. Easy application. Solvent-free. Resistance to weather conditions after hardening. Technical features are preserved at a temperature range of 20oC to +70 oC. Method of Application Ensure that application surfaces are dry and cleared from grease and dust. If necessary, tape both filling surfaces for a smoother application. Perform the application at the temperature range of +5oC to 40 oC.

...-stabilizing flame burner located beneath the ribbed steel base and an adjustable thermostat from 160° to 280° C. Oven chamber made of stainless steel, with 4-level supports. Door and counter door in AISI 304 stainless steel. High-strength door handle made of 20/10 thick AISI 304 steel. Adjustable feet. Standard: Piezoelectric ignition, 1 anti-tilt oven grid. Technical specifications POWER: 45.5 kW KCAL/H: 39,130 BTU/H: 155,246 DIMENSIONS: 700x1200xh900 mm. OVEN DIMENSIONS: 1045 x 530 mm. x 4 pos. OVEN POWER: 12 kW WEIGHT: 140 Kg.

... of Production: Turkey Washing Instructions: Wash at 30 degrees. - Do not iron. Do not use bleach. - Do not tumble dry. - Dry cleaning is not allowed. Package Contents: Pillow: 1 Piece It will be sent in its packaging, wrapped.

...The different designs of inductors, such as coils on ring cores and those on form cores, each have their own advantages, as does the respective core material (ferrite, iron powder, composite). There are also inductors that combine these advantages. Couplers and transformers share the same technical foundation: magnetically coupled inductors. They can transmit the smallest analog and switching...

...) ● Immersion Depth: Standard Upper Limit ● Operating Ambient Temperature: Max. 30-60º C ● Minimum Cooling Water Flow Rate around the Motor: 16 cm/s APPLICATION AREAS City Networks Drinking Water Wells Agricultural Irrigation Geothermal Wells Seawater Transport FEATURES Provides cooling and lubrication with water used directly without a cooling unit Motor mounting flange and shaft end comply with NEMA standards Motors are equipped with standard steel seals. - PUMPS Up to 200 cubic meters capacity Submersible Pumps made of Stainless Steel, Bronze, GG22 Cast Iron...

...B080-3 Drill Machine Vise Drill Machine Vise B80-3 Technical Data: Jaw Width approx. 80 mm Clamping Range approx. 80 mm Slot Center Distance approx. 110 mm Slot Width approx. 15 mm Design: with removable/screwed jaws simple sturdy cast iron/metal construction This vise, drill machine vise, is essential for any machine. It can be used, for example, on drill machines, drill-milling machines, and workbenches, etc.

...Specialists in the import of Organic Pumpkin Seeds, GWSAA grade, with 99% purity, a maximum moisture content of 8%, sourced from China, with availability of multi-residue analyses, ECOCERT certification, technical data sheet, and organic certification in accordance with regulation 834/2007 EUR. Organic pumpkin seeds have a mild and sweet flavor, and they are among the most nutritious seeds available. Their multiple benefits stem from a high content of essential nutrients for our body: zinc, phosphorus, copper, potassium, iron, and magnesium.

...We offer our products and services individually or as a complete package, including the necessary engineering. Whether it's a customized solution or standard consumables, our customers benefit from our cost-effective approach, strict quality control, high flexibility, regional warehousing, and a local and international engineering and logistics team that ensures improved communication, technical expertise, precise preparation, and reduced processing times.

...We have extensive experience as importers that supports us. Our human team is one of our greatest assets, and thanks to them, we have a strong commitment to serving our clients. We have a significant design studio where we develop our clients' ideas. It consists of a valuable human and technical team that is one of our greatest assets.

... laid in the building shell and improve the acoustic comfort. Tubolit DG THE ECONOMIC INSULATION FOR EFFECTIVE ENERGY SAVING Tubolit S THE INSULATION TO PREVENT TRANSMISSION OF STRUCTURE-BORNE NOISE Tubolit S Plus THE PROTECTION TUBE FOR INSTALLATIONS WITH LIMITED SPACE Tubolit AR Fonowave THE NOISE REDUCING INSULATION FOR PLASTIC WASTE WATER PIPES Tubolit AR Fonoblock THE NOISE REDUCING INSULATION FOR CAST IRON WASTE WATER PIPES Tubolit DHS Quadra THE QUADRATIC PE INSULATION FOR FLOOR CONSTRUCTIONS...

...{"Net weight kg 1100":"","TECHNICAL DATA:":"","Overall dimensions of fixed cast iron table mm 1180X670":"","Anodised aluminum carriage sliding on steel rails by means of a ball-bearing system":"","Clamping device":"","Main motor (saw blade) Kw (Hp) 11 (15)":"","Overall dimensions of the carriage mm 3200×420":"","Rotation speed of the saw blade shaft g/1’ 3000 – 4000 – 5000":"","Wide out-feeding...

...Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy coated...

...TECHNICAL SHEET: - Design table, multi-purpose. - Iron table base finished in black, base with a diameter of 58 cm. - Top with various decorations. - The same model is available in a high table - height 112.5 cm. DIMENSIONS: Top: 60 cm Height: 77 cm PACKAGING: Plastic and cardboard. UNITS: 1...

...Robust stainless steel appliance Cast iron plates for optimal heat distribution Large grooved surface plates Thermostat from 50 °C to 300 °C Illuminated heating indicator Illuminated on/off indicator Grease collection tray with heat-resistant handles Top plate: L 335 x W 220 mm Bottom plate: L 335 x W 230 mm Power: 2,200 W / 230 V Dimensions: L 410 x W 370 x H 200 mm Weight: 19 Kg Cleaning brush included Technical sheet User manual...

... the "Accessories" tab Note: The item is also available in a version for bolting (EAN: 4004338690663) Technical Specifications: Dimension a 1:750 mm (= total height) Dimension b 1:520 mm Dimension c 1:110 mm T-iron 1:25 mm T-iron 25 x 25 mm T-iron 2:25 mm Material: raw steel Surface: hot-dip galvanized Version: for hammering in...

...Galvanized iron scaffold for working up to a height of 5.70 meters, complete with work platforms and stabilizing bars, quick and convenient scaffolding both for assembly and use. It can also be used for minimum heights up to its maximum height, which approaches 6 meters. Technical Features Overall height 4.70 m Height to platform 3.70 m Working height 5.70 m Base width 0.75 m Base length 1.56 m...

... Foliar fertilizer solutions based on boron. Technical Sheet Foliar fertilizer solutions based on iron. Technical Sheet NP and NPK foliar fertilizer solutions available upon request. Advantages: - Provides tailored solutions for each deficiency. - Some solutions are certified for organic farming. - Meets the needs of various crops. Packaging: - 10-liter container - 1-liter container.

... machine downtime. Made from silicone-coated fabric and mounted on stainless steel frames, they are designed and manufactured specifically for any type of locomotive. Air conditioning bellows: primarily used in the railway sector, they serve to condition and cool engines; made according to customer specifications, they are produced in special fabrics compliant with railway standards and are supplied complete with painted iron or steel fittings for immediate installation.

...OMF Franchi performs grinding of steel, aluminum, cast iron, copper, and bronze. This process allows for the correction of any grooves caused by milling activities. The goal is to achieve the tolerances and roughness specified in the technical drawing. Both tangential grinding and cylindrical grinding are carried out.

...Turning and milling parts using NC and CNC turning and milling machines. Custom manufacturing from a single piece to small series according to precise technical requirements and dimensions. Materials: Only pure and high-purity materials with analysis are used, such as iron, copper, aluminum, titanium, nickel, tantalum, molybdenum, etc.

...We create indoor curtains: designer curtains, technical curtains, classic curtains, and decorative drapes. We offer a wide range of fabrics that can be matched together. We install curtains on walls or ceilings using cord tracks, steel cables, or various types of rods: in polished or satin-finished steel, wrought iron, or classic brass.

... mechanical engineering, engine and gearbox manufacturing, and general mechanical engineering. We are always capable of producing parts in our usual high quality for industries not yet listed here. For the production of our parts and for assembly work, we use a variety of materials such as non-ferrous metals, steel, cast iron, stainless steel, and plastics. Using these materials, we not only manufacture individual turned parts but also process cast and forged blanks, bar stock, and carry out the finishing of semi-finished components. Assembly work such as...

...JAT 4130 KG is a phosphate-free product from the boiler water treatment series. It stabilizes hardness, disperses iron, and serves to condition boiler sludge. The hardness slip from softening plants leads to deposit formation in the boiler system, which hinders heat transfer, reduces efficiency, and often necessitates extensive cleaning. Softening plants have a hardness slip that ranges between 0.1 to 0.3 °dH. This slip results in boiler scale, which obstructs heat transfer and can lead to severe damage.

...Vulcanized rubber rollers are generally small in size: diameters ranging from a few millimeters to 100mm, and lengths from 20mm up to 580mm. Rubber rollers are made from various materials such as brass, aluminum, and iron, and the coating can be done with any type of rubber available on the market, depending on the application of the roller. After the molding phase, rubber rollers can be ground, shaped using special grinding wheels, or even turned with tools made by us, as in the case of polyurethane rollers designed to increase grip when pulling films for packaging machines.