electrical equipment

...Meyer Burger and Enphase Solar Kit: Quality and reliability with a 25-year warranty on the modules and micro-inverters. This solar kit includes 10 Meyer Burger modules (390 Wc), 10 Enphase IQ8MC micro-inverters, and the necessary Enphase accessories. Suitable for three-phase electrical systems. The kit includes the following items: 10x Meyer Burger N-type HJT 390 Wc All Black - 172603 10x Enphase...

...Electrical supplies Work lights Flashing lights Wipers Mirrors Protective clothing (shoes/gloves/glasses/helmets…)...

... charging state. We offer you: Stationary charging systems designed in accordance with conventional and cutting-edge technology for the safe supply of energy to the batteries Maintenance case Safety equipment And much more...

...VDE approved mat designed for use in front of open switchboards and high voltage equipment. Provides safety for operatives against electric shocks. Fine fluted surface has slip-resistance benefits. Tested to 50,000 volts according to DIN EN 60243-1 (VDE0303 part 21) IEC 60243-2:1996...

...According to the accident prevention regulation "Electrical Installations and Operating Equipment" (BGV/GUV-V A), the employer (operator) is required to ensure regular re-examinations. The subject of the examination in terms of the accident prevention regulation includes: fixed electrical operating equipment, movable electrical operating equipment, stationary systems, non-stationary systems. Our highly trained staff conducts the examinations and prepares the documentation. We would be happy to provide you with a quote!

...Safety inspection of Kärcher high-pressure cleaners on-site according to the guidelines of the professional association (BGV D 15). Inspection of portable electrical equipment according to the guidelines of the professional association. All inspected equipment will receive a test label and a VDE 0701 test protocol, provided the equipment is in good condition. Minor repairs will be carried out on-site as far as possible. Power tools that we cannot repair on-site can be sent for repair based on a cost estimate.

...Advanced combustion control platform and all boiler components, ensuring combustion efficiencies of over 90%. By using frequency inverters, we ensure very low electrical consumption/steam produced ratios. The use of a 15” touch panel allows easy viewing and operation of the entire boiler. By providing an internet connection, the system is prepared for remote assistance.

...Floor socket 8701A with hinged lid that can be closed without tools. Heavy design, can be driven over, with lid seal. Suitable for cleaning with wet sweepers. Lid in natural aluminum anodized. Other colors and equipment options on request. Equipment:Schuko, RJ45 double Design:square Ground:Screed Protection:IP65 Material:Aluminum Color:Aluminum Surface:anodized...

... crusher provides really ample screening area for materials to be processed, with a top deck measurement of 5,000 x 1,500 mm and a bottom deck of 5,000 x 1,400 mm. Coming with a weight of 34,500 kg, it is truly robust and durable to meet the harshest situations.The hybrid drive system of the PTK 156 track cone crusher is a powerful combination of forces by Volvo, Cummins, and Perkins Tier 3-4 engines. It perfectly balances diesel and electrical power with great high performance while keeping fuel consumption and emissions at a minimum. The hybrid drive works regularly and reliably...

... includes a fully equipped carbon steel tank that is treated and painted, with an easily removable modular fiberglass cover, and an electrical panel on board with IP 55 protection. The moving parts (disc roller and drum filter) are driven by a single gear motor with a power range of 0.75 to 1.10 kW. -Minimum energy consumption -Reduced maintenance -Easy accessibility -Space-saving (compact construction)...

...Advanced inverter technology for superior TIG DC performance. Industrial TIG welder for difficult conditions. The fully functional and user-friendly control panel, with graphical and numeric display, makes it easy to set all welding parameters. Robust construction: electrical safety (IP23S), protected printed circuit boards and optimal airflow reduce contamination to extend equipment life in the...

...electrical equipment, office supplies and tubes to safety parts of all kinds, a wide variety of components can be manufactured for various industries. DC 01, DC 03, DC 04 according to DIN EN 10139 / mild steel - St 37/ special grades on request Depending on the customer's requirements, we supply treatment states from LG to C690.

... rest position in case of power failure. The pneumatic positioning eliminates the need for electrical wiring and also prevents EMC emissions. In the driving mechanics, non-metallic materials are used wherever possible. Expandable with additional pneumatic axes such as key switches or button activations.

...One of our activities involves refurbishing special machines to ensure they meet current standards: Electrical compliance Mechanical protections (enclosure) CE standards...

...The low temperatures of the outgoing fluid (water or water and glycol, down to -8°C) characterize the RW ax LT liquid chillers: the condensation of air means they use electrical energy, rather than water, for their operation: a resource that is then optimized by electronically controlled brushless axial fans. Ambient temperature allowed up to +40°C in standard operation.

...Prototype manufacturing and small series production at LILA - whether for medical technology, tool and machine engineering, aerospace, or electrical engineering and electronics - LILA supports you in prototype production. http://www.lila-laser.de/konstruktionberatung/ LILA is organizationally, technically, and personnel-wise well-equipped to produce a wide range of batch sizes. Whether prototype...

... cataphoresis protection. Left side door hinge. Heated door perimeter to prevent frost formation. Required cooling output: 4452 W Liquid line: 3/8" [10] mm Suction line: 1/2" [12] mm Condensation: remote Refrigerant gas: R744 GWP: 1 Climate class: 4 Power supply (Ph / Volts / Hz): 220-240/1N/50 Max electrical absorption cold cycles: 340 W Cooling capacity (+90°C/+3 °C): 45 kg...

... environments. Standstill heaters reliably keep motors or electrical machines above the dew point and ensure safe operation even in harsh ambient conditions. The minimum width of the heating element is 12 mm with a maximum length of 1000 mm, bending radii of at least 15 mm are possible. Temperature Resistance:150 °C Recommended max. watt density:1 W/cm² max. size:1000 x 100 mm min. size:30 x 12 mm Min. height:1,3 mm Lot Size:from 1 piece min. bend radius:15 mm max. IP-rating:- self-adhesive foil possible:no...

...15 mm width, different electrical connection possibilities. Manual override optional, offered as rotary knob to be adjusted via flat-tip screwdriver or as "paddle" for the use without additional tools Function:3/2-way NO Pressure range:2-8 bar Nominal orifice:2.6 mm Type of electric connection:Wire  Kv-value:3.2 l/min Size:15 mm Actuation type:elektrisch betätigt  Duty cycle:100 % ED...

...During the manufacturing process, electrostatic charges can occur, leading to various issues such as dust, electric discharges, production stoppages, health risks, etc. Elcowa antistatic bars generate ionic emissions that neutralize these electrostatic charges. These bars are custom-made and can be easily integrated into your equipment. Our systems allow for optimal elimination of...

...Installation Components • Safety Drag Cable KBH • Universal Components • Drag Cable • Electrical Installation Material KHB stands for Compact Touch-Protected Hollow Chamber Profile. It is used for the power supply of one or more movable consumers, is touch-protected, corrosion-resistant, and suitable for use in low-dust environments in both indoor and outdoor facilities. The ABUS drag cable...

...The FLODEM electromagnetic flowmeter, based on Faraday's Law, is designed to measure the flow of liquids or slurries with an electrical conductivity greater than 5 μS/cm. The system measures volumetric flow by detecting the velocity of the medium flowing through a magnetic field. The measuring sleeve, integrated into the sensor, can be installed vertically or horizontally in the process line. The...

...Fine-tune straightening of residual distortion This model represents a compact fine-straightening system for the correction of residual distortions. The special strength of the Orthopac MFRC is the extremely high straightening accuracy at relatively small distortions. The compact straightening unit is equipped with a skew and bow roller as standard. This arrangement allows for very fine adjustment of the straightening effect while permitting small device dimensions. Available with hydraulic or electrical straightening roller adjustment.

... - One-meter extension - Electrical control box - Gun control system linked to the ventilation startup - Visual and audible monitoring of clogging via a differential pressure switch - Fixtures under tempered glass. Brand: Aspirelec...

...medical, aeronautic, defense, fluid and electrical components, food and cosmetic packaging… Differential pressure decay leak measurement: vacuum to 20 bar Multi-test leak tester 128 programs Fully integrated electronics and pneumatics Flexible communication format: Bar code reader, RS232, USB Date storage on internal memory or USB key Weight:around 3.5 Kg Dimensions:(in mm) H 157.10 x W 298.90 x D 135.80g Operating:+ 5°C at + 45°C Storage:0°C at + 60°C...

... pressure vessel, pump, and spray nozzles. They serve as the interface for the electrical control or connection of the spraying system. Valve cabinets, as an additional expansion stage, further protect the components of the valve unit from dirt and create a uniform overall appearance on the machine, especially in extensive setups.

...ERDWICH hammer mills are the answer to the challenge when selective grinding of hard and brittle materials is required. But they also leave no doubt when it comes to the pelletizing of tough materials as preparation for subsequent separation systems. This sounds rigorous, and it is. ERDWICH hammer mills are particularly suitable for metal scrap, electronic and electrical waste, or shavings from...

... 29 bit resolution (8192 steps/revolution x 65536 revolutions). Different mechanical versions are available to satisfy all application requirements: square flanged, round flanged with servo coupling, and with hollow shaft to couple directly to a motor shaft; all the types offer different options for the shaft/hole diameter. The electrical connection is by 3 M12 connectors. The stout aluminium...

...The cleaning station MiJET Wash Station with integrated cleaning basin ensures clean workplaces and oil-free cleaned workpieces. No electrical connection is required for this. Only a compressed air connection is required. Application The washing station consists of a worktable, in which a wash basin with nozzle and a MiJET are installed. The washbasin serves as a pre-cleaning unit, the MiJET...

...The pressure transmitters of the 21Y series have no internal seal and a high insulation voltage of 300 VDC, and are extremely resistant to environmental influences. The sophisticated compensation circuit makes it possible to specify a narrow total error band. A wide range of pressure connections and electrical connections are available to choose from. Pressure Ranges:0…2 to 0…1000 bar Accuracy:±0,5 %FS Total Error Band:±1,5 %FS @ -10…80 °C Interfaces:4…20 mA, 0…10V Temperature Range:-40…100°C...