mounting structures

...Development structure is available from 1,050 to 1,400 mm (42” to 55”) Maingate structure is available from 1,400 – 2,000 mm (55” to 78”) Supplied complete with garland or fixed frame idlers Suitable for floor or roof mounting Dimensions: Available as development and maingate structure Belt widths from 1,050 – 2,000 mm (42” to 78”) ...

...): The beams of the БДК series are designed for use in buildings with small spans. I-BEAMS OF THE БДКУ, БДКУ-Л SERIES (64*241/302/356/406): Thanks to the wide flanges, БДКУ beams have a large mounting surface and high strength. I-BEAMS OF THE БДКШ, БДКШ-Л SERIES (89*241/302/356/406/457): Used in buildings with extremely high loads - as rafters. I-BEAM OF THE СДКУ SERIES (64*140): The glued laminated timber I-beam is the foundation of the wall frame. I-BEAM OF THE СДКШ SERIES (89*140): A wide glued laminated timber I-beam used for the production of wall panels.

...Ladders are available in various sizes. Cage ladders are specifically designed for accessing fixed structures such as industrial buildings, installations, silos… and generally, wherever there is a requirement to carry out periodic inspections in complete safety. The ladder is secured to the wall with mounting brackets. The entire cage, made up of rounded hoops and aluminum rungs, forms a...

...Fiberplast has developed an aluminum foundation profile specifically for its Envirodeck wood-composite floor planks. These foundation profiles feature a special design that makes them easy to use in combination with Buzon floor supports and our mounting clips. The load-bearing foundation profiles do not twist, can withstand more weight, and are also very lightweight. Although the profiles may be...

... plate (130 x 130 mm) + welded-on mounting rod (Ø 42 mm) Female thread (M 10) at the top end For steel surfaces with a depth of at least 5 mm For horizontal and vertical loads of max. 3 kN Incl. stainless steel installation set...

...The chassis is elevated, with a usable height in the chassis optionally at 3U or 6U. Configurations with 19" segments. Depending on the total width of the configuration, mounting plates are provided on the right and left. The mounting plates always have a height of 3U and are designed to accommodate safety and control elements, power supply components, and data outputs in the DH form factor...

...For lighting and power circuits while stationary laying in electric devices, for inflexible installation in electric devices, machinery, mechanisms and industrial machines for rated voltage up to 450V (for networks 450/750V) frequency up to 400 Hz or permanent voltage 1000V. Is used for laying in empty places of steel pipes and construction structures, where there are not frequent bends of the...

...KEY FEATURES Small packaging Robust and lightweight aluminium structure Top quality fabric materials All weatherproof Fully closable (sidewalls) Multiple anchoring options Fits on Layher stages TÜV certified Fast and easy installation Customizable Digitally printable cover Endless connectable Multiple mounting options up to 400 kg All weather proof -30 to +70...

...The electric lift column SQ is made of a colorless anodized aluminum profile with a cross-section of 45x45 mm. The stainless steel stand tube is mounted in a plastic sleeve and is moved by a spindle drive. Up to four lift columns can be connected to a control unit and operated synchronously. On two sides of the spindle lift column, there are mounting grooves (width 8mm). These allow for the attachment of crossbars, intermediate shelves, and additional structures along the entire length of the electric lift column.

...Solar modules with frames are designed for easy installation with SOLARA mounting systems or other structures. The sturdy aluminum frame of SOLARA's solar modules is highly robust, completely weatherproof, and resistant to saltwater. The frame provides the solar module with the necessary stability for open and ventilated installation and protects against mechanical stress such as wind, snow, etc.

...Spiral clamp is designed for mounting a self supporting fiber optic cable to the light poles, towers of high voltage lines, the contact networks of railways, buildings and structures. The clamp consists of a power section, which is a U shaped strand of several spiral wires, fastened together with a special solution, on the inside of which an abrasive is applied. The protector for additional protection of the cable is a set of individual spirals or glued strands. Working tension:10 kN Destructive tension:17 kN Minimum cable diameter:11.7 mm Maximum cable diameter:12.8 mm...

...The elements of prefabricated structures (sandwich panels, light steel construction elements, roof elements, stairs and corridors for prefabricated multistory buildings) have been designed and painted in advance at the factory and have been dispatched to the site for mounting. Reinforced concrete flooring is required for prefabricated building. The material for the finishing is also supplied to...

...We manufacture successful booths, concession stands and vending kiosks for your business The best option for fast street trading or start-up businesses is prefabricated kiosk. Such structures are budget-oriented, quick-mounting, mobile, comfortable for trading or other business activities, including services. The most popular are booth kiosk on wheels concession stand office...

...For securing cables and pipes to chassis beams, girders, or steel structures - Free samples ✓ Any surface treatment ✓ Technical advice ✓ These high-performance holders with rounded edges are ideal for securing cables and pipes to chassis beams, girders, or steel structures. Installation is simple. A light tap secures the holder to the panel; no special mounting tools are required. The cable or...

...Suitable for handling large, heavy sheets made of glass or metal, with a flat or slightly curved surface. The friction structures secure the grip and allow for the vertical handling of glass or metal sheets. The double lip enhances safety in case of overloads or tearing of the outer lip. The robust and abrasion-resistant material minimizes the risk of marks. The flat mounting plate facilitates the installation of custom fixtures. Additional hole available for a measuring device or a back-blowing device.

...The Wally mounting flange from G-Fittings, made of stainless steel V2A, is designed for both indoor and outdoor use and is suitable for wall and floor mounting of stainless steel pipes or wooden rods in various diameters and finishes. The stainless steel pipe is inserted and secured with the included set screw. Welding is not necessary. The Wally flange is suitable for wall and floor connections for example for handrails, footrails, railings, support bars, structures, barriers, coat racks, and fall protection.

... new A111 measurement module in the Q.series product family allows for signal acquisition from four IEPE sensors. All inputs are galvanically isolated, ensuring high resistance to interference and robustness. The four 100 kHz A/D converters with a resolution of 24 bits provide significant dynamics. Multiple measurement ranges and filter options meet the requirements of vibration analysis. The A111 module fits into the series of Q.series signal acquisition modules and is available for rail mounting, as a 19-inch plug-in unit, or in a mobile housing.

...We are continuously expanding our manufacturing capabilities. We offer the production, assembly, and packaging of various types of clamps, profile connections, fastening elements for rails, as well as other mounting and installation components made from stainless or coated steel. They are used in the construction of transmission lines, bridge structures, as well as in parts of buildings, industrial halls, fences, protective barriers, and fastening elements for power grids.

... •foundation nut is made of wrought iron recommended by European institutions for use at high shock loads in construction Shuttering telescopic props are designed to support horizontal shuttering liners when casting bridgings and use as temporary supports for fixing the horizontal elements during mounting and dismantling of various structures. Set of different height along supporting telescopic props allows performing in situ concrete works at any heights of up to 5.3 m. ...

... aggregates and machine components. We supply the appropriate hammerhead screws and threaded plates, as well as extensive mounting accessories for creating complex structures. All BULLFIX consoles are manufactured in Germany.

...Obstruction lights are vital in making high-rise buildings, towers, and wind turbines visible to passing aircraft. MUCCO Wall Mounting Obstruction Light Low-intensity B-type aviation obstruction lights are produced in accordance with ICAO (ANNEX 14) standards. Additionally applied on tall structures for collision avoidance measures and airport runway safety. Also, all obstruction lights are...

... in transparent materials such as gemstones ideal as backlighting in combination with telecentric lenses low divergence, high light output Illumination parameters adjustable with vicolux® smart light illumination controller Connection: M8 connector on the housing various mounting options and extensive accessories Order number: 1-33-238...

... measurements can be carried out within a short time when used with up-to-date total stations. Drilling is no longer required as pre-installed anchor sleeves for Dw15 threads can be used for mounting Anchor sleeves can be installed during the construction phase for survey points, e.g. above and below the bridge support, in the case of retaining structures and in many more applications. Material: Stainless steel V4A Temperature and UV-resistant Crosshairs are imprinted on the backing plate under the exact centre of the reflective target to ensure the survey point is durably marked. If the reflective t...

...The new, high-brightness ATEX LED tube light KE-LED-EX 5024 provides you with extremely bright and glare-free light for work in explosion-protected areas. It is ideally suited for permanent lighting of facilities or structures with special and extreme requirements. Optionally, the tube light is available with through-wiring to connect multiple lights together. Thanks to the included mounting...

...We are an important partner of the most prominent investors and manufacturers of solar systems. We participate in the turn-key realization, the supply of solar power stations worldwide. We offer comprehensive consulting services in the area of photovoltaic power stations, including the corresponding financing. We also trade in all components necessary for the erection of solar structures. All following the requirements of even the most exacting clients, utilizing rapid but economical solutions.

... approaches are combined and their weaknesses circumvented. Target Applications: Acoustic transmission through components in real-life mounting conditions Trimmed body modeling using a combination of Actran detailed models in physical coordinates and a Nastran body-in-white modal model...

...All structures are hot-dip galvanized after manufacturing and are demountable. With its elastic design, it can be adapted to almost all milking parlor buildings. The general structure consists of 48 mm flat pipes and is supported by the building. All connections are made with cast and sheet metal clamps, and no welded joints are used. The mounting post at each station increases the stability of...

... pipes, solar panels. Also, the crosshead can be used in the assembly of crossheads, consoles, supporting structures of any type. The Сsolar profile is made with a thickness of 1.5 mm. The length of the profile is limited only by the transport dimensions. The galvanized Сsolar profile with acceptable price is suitable for influence of high and low temperature, humid environment, solar radiation.

...The entire product range available in the catalog along with related supply and B2B sales services worldwide. - Photovoltaic inverters - Batteries for photovoltaics - Photovoltaic panels - Power optimizers - Mounting structures - Charging stations and wallboxes for electric vehicles - Heat pumps...