horizontal pump

... space requirement - Easy disassembly from the IBC via a union nut - Suitable for applications in Ex areas in Zone Flow rate::max. 240 l/min Delivery height::max. 13 mWs Viscosity::min. 1 mPas - max. 1000 mPas Outer pipe diameter::max. 41 mm Immersion depth::for horizontal use Material outer pipe::Stainless steel Media / Fluids::Solvents, Aqueous salt solutions, Mineral oil products, Easily flammable media Seal::with mechanical seal Container::1000 liter IBC, containers with bottom outlet...

...without shaft seal streamlined housing made of PP or ETFE volume flow of MA pump type 2 is up to 80 l/min, of MA pump type 3 up to 100 l/min discharge head of MA pump type 2 is up to 8m.Wg, of MA pump type 3 up to 15m.Wg horizontal single-stage monoblock design Material:PP (glass-fibre reinforced) / ETFE (carbon-fibre reinforced) Rated speed in [rpm] at 50Hz /60Hz:3000/3600 Suction port:filetage...

...The horizontal pump set is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to vertical drum pumps. Ideal for extracting concentrated acids and alkalis. * optionally with leakage detection (Safety Box) * horizontal connection at the bottom outlet of the container Features & Benefits * available with electric...

Since its founding in 1983 by Dipl.-Ing. Heinz Langer, our family-owned business, now in its second generation, has developed into one of the leading manufacturers of highly corrosion-resistant pumps. Our company primarily focuses on the development, design, and manufacturing of PTFE/PFA-lined chemical pumps with magnetic drive. Through this specialization, we have established ourselves in the gl...

...ESSLRYKHT / ESSLRYSKHT / ESSLRYCuKHT Series Liquid Receivers, having suitable base for Horizontal mounting, is providing durability and easiness during installation. This connection base provides protection from the vibration and any other external factors, the ESSLRYKHT Liquid Receiver has structure and durability to usage for years. It is designed for heat pump systems thus provides bi-flow...

... LIMITS Liquid temperature: -10℃～110℃ Maximum ambient temperature: +40℃ Maximum system pressure: 10 bar Protection level: IP44 Mains connection: 230V; 50Hz Insulation class: F Characteristic features: Flanged (PN6 and PN10 compatible) Installation: Motor shaft should be positioned in horizontal direction Model Name:Aldea GPA 40-15F Strength:640W Max. Flow:28 m³/h Max. Height:15m Ø Connection Diameter:DN 40 Pipe Range:250mm Energy Efficiency Index (EEI):≤0.23...

...The sealer mod. DZ 800 W is a multifunctional machine for of large dimensions. Without limitation caused by the size of vacuum chamber, this horizontal vacuum packaging machine has very wide application range. Built in stainless steel. The vacuum pump 20 m³/h allows for high production. The sealing bar (or the sealing bars depending on the model chosen) with width 10 mm and closing with...

...The ECO SNM close coupled, end suction, single stage horizontal centrifugal pump is standardised to DIN 24255 / EN 733 and can be used for a vast range of applications in the industrial and marine markets. It is designed to pump low viscosity clean or slightly contaminated fluids without the presence of solid or fibrous particles. If required, this pump is available in a vertical version known...

... securely placed on the ground for usage. Conveying systems are put in place to pump the cement out if need be, providing continuous supply of cement during construction activities. The 50-ton capacity assures carriage of enough cement at one time, thus guaranteeing continual work without constantly refilling. Convenience, efficiency, and reliable storage for construction projects characterize this size of a horizontal type cement silo.

...Horizontal multistage electric pumps with stainless steel impellers. Mainly used in pressurization systems, irrigation, washing systems, and handling clean water. Outer casing and motor shaft made of AISI 304 stainless steel. Mechanical seal in ceramic graphite. Closed self-ventilated motor. Insulation class F. Single-phase power supply 230V 50Hz, with permanently installed capacitor and built-in...

... Capacity: 1000 liters Meat Carrying Capacity: 350 kg Vacuum System Hydraulic System Maximum Safety Automatic Ready Recipe Easy Operation with Digital Touch Screen Drum Bearing Rollers: FAG or SKF brand bearings are used. ETDYSH - 1000 Mixer Gearbox: 2.2 KW The reducers used are YILMAZ brand, KR series. ETDYSH - 1000 Meat Mixing Tulmbler: Equipped with one 0.70 KW vacuum pump. Electrical Components: Utilizing SCHNIDER or DELTA electrical components. ...

...Submersible pump for cooling water 4.0KW Horizontal installation 20 liters/min, 135 meters water column 220V/50Hz 15.6A, 380V/50Hz 8.6A, Outlet connection PS 3/4" Inlet PS 1 1/2" ITEM NUMBER: 5194610 MANUFACTURER PART NO: ACP-4000HMFD Outlet connection: PS 3/4" Inlet: PS 1 1/2"...

...Disc Mill, Grinding Container Volume from 6 to 600 Liters The DYNO®-MILL KD is a stirred media mill with a horizontally arranged grinding container. The specially shaped DYNO®-stirring discs, symmetrically arranged on a shaft, transfer the energy necessary for dispersion and grinding to the spherical grinding media. The product to be processed is fed into the mill via an external pump. Separation systems are available as screen separation in various gap widths or as a dynamic, continuously adjustable separation gap.

... tank and are optimal for pumping aerated lubricants (emulsions or cooling and cutting oils), due to the high chip detachment from turning, milling, or grinding. SBA series with optional SAE flange for vertical or horizontal pipe connection with G ¼ pressure gauge connection. Flow rate: Up to 2200 l/min Lifting height: Up to 62 m Media: for cooling liquid, refrigerants, emulsions, oils Drive...

...Bomar Ergonomic 275.230DG Standard Details: Heavy duty one-piece cast bow Precision control hydraulic downfeed Substantial vices, quick set lever operation Bow rotates 45-90-60° Easy to read mitre scale Carbide blade guide pads and rollers Heavy duty blade tensioning unit Heavy duty, 3 phase motor Re-circulating coolant pump Adjustable guide arm Heavy duty gear train Blade speed: 35 & 70 m/min 500mm length stop included...

...A state-of-the-art air-water all-in-one drinking water heat pump, requiring minimal space and with a volume of 60 to 100L. Drinking water heat pump with a boiler and an attached mini heat pump unit for hot water supply in a household of 2-3 people with a shower. Alternatively for reheating pre-warmed drinking water to >60°C, to prevent legionella. Height from 100 to 130cm, diameter 47cm, hot water volume 60 to 100 liters, Mounting: Vertical or horizontal wall mounting possible.

...Max viscosity 500 cSt (mm2/s) Rotation speed 1400 rpm Power 0.75 (JEV21), 2 (JEV23) Current 2.2 (JEV21), 5 (JEV23) Suction and discharge 1" Max HMT 60 meters (JEV21), 50 meters (JEV23) Voltage 230/400 Volts three-phase Built-in and adjustable bypass Transfer 10 to 500 mm2/s Positioning horizontal or vertical Max liquid temperature to pump 60°C Ambient working temperature 10° to 60°C Specifications and advantages Gear pump FLUID: Diesel, Oil TECHNOLOGY: Gear ATEX: No PUMP TYPE: Equipped FLOW RATE: 1.5 m3/h max - 3 m3/h max ORIFICE: 1" BODY: Cast iron MECHANISM: Delrin...

... eliminated. The product can be diluted with demineralised water or with a hardness less than 35°F up to a maximum of 15-20% (it is recommended for use preferably without dilution). Proceed with the pure product or with the solution obtained, with low pressure injections by airless pump (manual or electric), directly into the designated holes in the masonry. Consumption may vary depending on the...

...For clayey materials, as an alternative or in addition to the disruptor, it is possible to consider a system of high pressure water jets called the jet-ring system. This system consists of a ring, applied in correspondence with the filter of the dredging unit and a centrifugal pump for feeding the ring with a horizontal axis (available in electric and hydraulic version).

... horizontal and vertical configurations. With the help of these steam generators, steam pressures of up to 100 bar and higher can be achieved. The quick steam generators can also be designed as directly fired pure steam generators. In this case, all media-contacting parts, such as the pipe coil, pump, and fittings, are made of stainless steel.

... 0.01 (FED 209 E). The system prevents particles from being discharged in the environment where the linear unit is located. This has been achieved by using a special straight seal that closes the horizontal opening where the slider moves, as well as by the operation of a 0.8 vacuum pump connected to 2 vacuum pipes located inside the drive head and the idle head. The system allows vacuum to be...

...-measuring principle is essential for the simple and time-saving handling of our balancing machines for rotors. Application examples for horizontal balancing machines: - Electric rotors - Railway wheelsets - Pressure rollers - Crankshafts - Mulchers - Paper rollers - Pump impellers - Hammer rollers - Spindles, etc. The Z series of force-measuring balancing machines for rotors with belt and/or drive shaft drive is designed for a rotor weight range of 0.05 kg to 40,000 kg.

... The machine is very simple to use. The motor is very quiet and suitable for use in residential areas. Weight: approximately 209 kg without fluids. Maximum speed of the train: 45 km/h. Maximum splitting length: 62 cm. Rod speed for a full stroke: approximately 7 sec. Nip pressure: 20/17 tons (measured value). Package dimensions: 120 x 80 x 55 cm (L x W x H). Hydraulic oil quantity: 10 l (HLP46). Hydraulic pump: 2 stages. Hydraulic capacity: 38.6 l/min. Hydraulic pressure: 240 bars. Tires: 10 inches. Dimensions: 228 x 102 x 100 cm (L x W x H). Wood working height: 65 cm.

... components makes our machines very easy to maintain. Different types of balancing machine suite different configuration of pump impeller, correction methods and production volumes. Typical balancing machines for pump impellers are vertical, horizontal, and horizontal spindle. These can include automatic correction which are typically milling but can also be other add and removal methods. Let one of...

...Jet - Self-Priming Surface Pump - PUMPS AND LIFTING STATIONS Model: JET In stock: 5 Products Liquid temperature: from 0 °C to + 35 °C. Maximum suction depth: 8 m. Maximum ambient temperature: + 40 °C. Maximum operating pressure: 8 bars. Installation: to be installed in a horizontal position.

... unit is equipped with two high-efficiency horizontal flat evaporators. The AIR 23 is suitable for cascade installation to further increase power. Average climate zone Energy efficiency class (D to A+++): A++ Power: 16 kW Efficiency ETA: 171.0 % OBJECTIVE: 4.4 Single-family and semi-detached houses Small collective and tertiary Underfloor heating Radiators up to 60°C Heating or heating/cooling 65 °C Max. flow temperature. OTE controller...

... 50 kg - 120 lb and 185 kg - 400 lb open drums, as well as for horizontal and side mounting on grease tanks and bags. Air consumption at 5 bar (70 psi) air pressure, NLGI-2 grease at 20 °C (68 °F) and 80 cpm. Noise level measured at 1 m (3.3') from the pump, 7 bar (100 psi) air pressure and free delivery. Fluid outlet: 1/2" BSP (F) Noise level: 80dB Pressure ratio: 70:1 Effective diameter of the...

...* Set independent horizontal peristaltic pump * Ability to work with all infusion sets * Turkish Usage Menu * Microprocessor Controlled Reliable and Precise operation * KVO, Bolus and Purge functions * Audible and Visual alarms * Voiced alarm system * Optional docking station * HBYS...

...Horizontal Systems, Customized The key features of our horizontal systems at a glance: - As with our other systems: Customized design (size, pump line, etc.), adaptation and equipment of the system, if desired with process(es) - Fully automated vaporization process with convenient system operation and control via visualization on PC: Input/management of all parameters, recipes, etc. with logging...

...The High-Pressure Liquid Oxygen Pump is used for filling oxygen cylinders with liquid oxygen under high pressure in industrial facilities and the healthcare sector. The oxygen pump, consisting of a gearbox, vacuum-coated cold chamber, and lubricated crank-driven horizontal piston body, provides a discharge pressure between 230 bar and 400 bar. All materials used in the production of the liquid oxygen pump demonstrate durability against high pressure. It is possible to pump oxidizing gases such as liquid oxygen (LO2) and liquid nitrous oxide (LN2O) with the Liquid Pump.