external processing

...Hand lathes for wedding ring processing. Internal and external processing. Radius, straight processing, side processing, edge breaking, etc. Use of diamond tools.

...DSUE series are mobile flour sifting machines. Thanks to the 800 micron silk tulle used, no substance other than flour passes through the sieve. Separated external substances are collected in a garbage bag. With this system that ventilates the flour and breaks the stoned flour, 50 kg of flour can be sifted in 1.5 minutes. PRODUCT SPECIFICATIONS 50 kg flour sifting in 1.5 minutes Produced...

... pulsation-free output. Your advantages: - No dripping or stringing due to programmable retraction - Direct linearity between dispensed quantity and speed - Constant dosing volume even with fluctuations in density, viscosity, and temperature - Reliable dosing without heating the medium - Drive with gear motor and optional external fan - Easy programming of quantity and speed - Low maintenance, quick disassembly - Free intake possible due to self-priming operation... Dosing volume: ~ 65 ml/revolution Weight: approx. 25 kg Medium temperature: -20° to +100°C Min. dosing quantity: 8 ml (depending on medium)...

...Waste incineration plants, refuse-derived fuel (RDF) incineration plants or incineration plants of any kind. For various types of cranes with internal or external holding ropes. Technical design Low-maintenance or maintenance-free for increased profitability 4-rope grab with half-closed grip Suitable for handling waste of any kind Closing rope devices: Rope nozzles KROGER MAINTENANCE-FREE, rope...

... trimming. The machines can create external and internal contours and can also roll synchronously (inside/outside) using a special tool head. Pipe diameter: 6 - 22 mm Wall thickness: max. 1 mm Processing length: max. 40 mm Cycle time: 4 - 10 sec. RPM: 300 - 1000...

...The RTL (Rotating Tool Lathe) operates in contrast to other finishing machines in reverse: The workpiece is fixed and the tool rotates. You can clamp the pipe securely from the end up to an outer diameter of 323 mm and start machining. No long setup time: Simply insert the pipe, clamp it tight, and begin processing! RTL ZX follows the same machining principle as Beaver CNC. However, compared to...

...Fatra, a.s. – a traditional plastic processor in the Czech Republic – expanded its production capabilities in 2015 by processing internal and external plastic waste on a new regranulation line. We offer – regranulates made from polyolefins produced on modern regranulation lines, processing of plastic waste from materials such as PP, PE, PP/PE, EVAC, and the purchase of plastic waste.

...Safety from the market leader! OA 2xx – Semi-automatic assembly machine for external sealing rings Application Areas - Semi-automatic assembly of external sealing rings (e.g., O-rings, quad rings, and rectangular rings) - Assembly device for series production - Variant processing possible through interchangeable part sets - Special shapes (e.g., lip seals) possible (optional) Your Advantages...

... batteries. Two machine sizes with different shredder lengths and drive powers are available for every challenge. Technical Features: - Robust two-shaft rotor shredding principle for forward and reverse shredding operation - Individually plugged, replaceable special knives - Variable shredder system configuration - External shaft bearing - Individual drive for each shaft with elastically mounted special gearbox - PLC control with reversing and shutdown automation...

...6 Grinding Machines 3 Side Universal Cylindrical Grinding Machines SilemanBR 80 Cylindrical Grinding Contour/Polygon Karstens Internal Cylindrical Grinding Machine TOS BDU 250 Surface Grinding Machine TOS External Cylindrical Grinding Machine Schaudt...

... careful selection of raw materials and the adoption of innovative production processes are the primary guarantee of quality and long-term reliability of our product. We conduct various tests for strength and durability, as well as quality control tests during the different stages of processing. Upon request, we can issue the relevant certificates in compliance with national and international regulations.

...{"Hydraulic uncoiler":"Hydraulic uncoiler\nHydraulic internal clamping and unloading\nTop of the arm\nCoil servo motor straightener\nStraightener adjustment and precise positioning function\nRoller group and gear transmission function\nDistance detection and proximity sensor function\nMatrix memory system\nMultiple external output options\nPress automation control function\nOperation with...

...Ladders and platforms are produced completely modularly with galvanized sheets. Holes; It is drilled with the latest technology punching machines to facilitate screwing operations. Exterior and interior stairs; It can be joined to existing holes using fasteners. Standard silo external ladder safety system allows people to reach the roof safely. The rest platform is placed under the roof entrance cover for easy access to the roof or for your safety when entering the silo. ...

...screw and barrel for rubber extruder Material: HVOF Spray Coating Screw, PTA Spray Welding Screw, Nitriding Screw Application: For use in the Injection Moulding Machine , Extrusion Moulding Machine, Bakelite Moulding Machine, and Rubber Moulding Machine. Processing Dimension：Min External Diameter Ø 12mm, Max External Diameter Ø 250mm,Effective length Ø 8000mm . Machining SCREW Heat...

... same time. RetailImpact permits controlling of the demand as well as improving customer loyalty and brand differentiation. In a few steps, product, advertisement and cross selling information is provided for scale displays and external displays - based on content and optically customized to your offer. Via RetailImpact advertising and consumer information can be managed and directly assigned to several scale displays or screens from the back office. You increase the advisory service of your staff by providing information, recipes, preparation instructions or allergen information. They are...

... processing of complex geometries and a variety of materials, including brass, free-cutting steel, aluminum, and copper​ (HKR Roding)​​ (HKR Roding)​. Performance and Technology: The machined parts from hkr are characterized by high precision and quality. The company manufactures with an accuracy of holes up to 0.01 mm and a surface accuracy of Ra 0.8 and Rz 6. Manufacturing methods include thread...

... even the most demanding clients. We support you by: - before production, we review the technical documentation and implement possible changes, - we have a larger amount of material in stock which guarantees us an immediate start of production and quick delivery of a new spare part, - all products are inspected, deburred and hand polished before release. The components are checked to ensure that they fit properly and that the external product is compatible. All dispatched products are functional and visually sophisticated. ...

... kg. The bins can be ordered with 4 legs, runners and 4 wheels without brakes. The version with 4 wheels without brake can be transformed into the version with 2 or 4 wheels with brake by purchasing the relative accessory. This is only a surcharge that must be applied to the bins that already has wheels (it cannot be applied to the bins with the feet). External dimensions:1000x700x h 650 mm Internal dimensions:940x640x h 500 mm Max capacity:297 dm3 Max load:300 kg Maximum range overlap:1200 Kg Utilization:Technical/ alimentary depending on the model...

...Do you want to validate a concept or industrialize the production for a new process, new material, or new technology? Do you want to minimize the associated industrial and financial risk? Are you concerned about the feasibility of your project? Does the implementation of this project require the involvement of multiple external contractors at each stage of the process, whose specific processes require a common pre-validation?

... covered with non-removable design clips. For strain relief with installations in the lid, useful lid holders are available. To enable external mounting almost anywhere, the technoPLUS delivery program includes a practical mast mount that conforms to nearly any curvature. Inside, there are already mounting domes for easy integration of components. Compatible cable glands and additional accessories are, of course, also available. ASA LURAN: Plastic...

...Through-feed grinding process µ is our measure! Processing of parts according to drawing or DIN in small and large series Outer diameter: 0.8 mm to max 30 mm Length: 3 mm to 250 mm ADM tolerances from 3 µm Surface: Rz 0.6 µm Roundness: 0.8 µm Material: Tool steels, automatic steels, high-speed steels, coated steels, plastics, etc. ADM: 0.8 - 30 Length: 3 - 250...

... measurement without causing damage, thanks to a reusable, adhesive backing. The accuracy is comparable to that of a pressure tap in subsonic flow, but with a tiny fraction of the setup time and cost. With Aerostrip, you can quickly and non-destructively perform external pressure measurements on control surfaces, either live or in a wind tunnel, enabling faster processing and optimization of aerodynamic components.

...Since 2020, Stella has been offering the services of a molecular distillation industrial unit fully dedicated to external clients. With its 4 tanks of 15m3 each, this unit provides extensive capacity for the large volumes of our industrial partners. Molecular distillation is a green technology that does not use solvents or chemical products in the processing and purification of oils, waxes, and fats in general. Food tanks: 2x13 tons Non-food tanks: 2x13 tons Annual capacity: 750 tons...

... precision and manufacturing quality. We are just as happy to create individual pieces and prototypes for you as we are to produce protective hoods or covers in series. Industrial and commercial customers can always rely on our service. With decades of experience in plastic processing for machine and metal construction as well as for technical objects, we are the right contact for you. Shrink Hoods: Residential Modules...

... root radii. All ECOROLL multi-roller tools can be used on CNC turning, drilling or milling machines and machining centers or on conventional machine tools. They can be characterised by reliable functioning and high precision. Adjustment of diameters is very convenient, and only nominal lubrication is required. Futhermore, replacement of wear parts is very simple. This uncomplicated maintenance and short primary processing times enable significant time savings.

...The machine is designed for cleaning, degreasing, chemical treatment of the outer layer and blowing of small components. The parts are arranged in trays with dimensions 600x400x70-150 mm. Two washing zones – pre-washing zone and zone for main washing. After each washing zone there is zone for blowing. The pre-washing zone has an external band filter, which is with the possibility of processing a...

...) and are finally conveyed to the unloading station after treatment. The dimensions of this system depend on the drum dimensions desired (perforation from 3 - 15 mm possible by choice). Set as our default, the models WD3, WD5 and WD9 are available with different sizes. For industry 4.0 demands, this system is best prepared. Standardwise, a monitoring of the processing data via network is possible also from an external working place. On option, the control of the machine via OPC-UA server can be installed additionally. Siliconisation or other coating of elastomers is possible on option.

...Melt pump for the production of HDPE / LDPE / LLDPE. Melt pumps of this type are used, among other things, in the production and processing of HDPE / LDPE / LLDPE. The EXTRU series is precisely tailored to the requirements of these processes and operates with the highest precision. Special gearing allows for a nearly pulsation-free delivery of the melt, ensuring consistently high product quality. Medium: Polymer melt, adhesive Actuation: with electric motor Start-up: self-priming Technology: external gear Application area: extrusion...

...Matco contributes to the circular economy by processing every waste stream into new raw material, or by converting it in energy, as well as in its own installations as through external processing sites. Matco offers you a full package when it comes to waste management. We arrange everything when it comes to waste and waste processing in a durable way, for all waste products, even in small quantities. We offer a customised total solution for the collection, processing, treatment, cleaning and transport of waste products.

... production systems is easily possible System Description • Comfortable operation via display • Intuitive menu navigation through navigation and function keys • Display shows all functions • Maintenance display and simple fault diagnosis • Custom software adaptation possible • Ideal for applications that do not require process monitoring • Rivet mandrel disposal via vacuum system • Optional pressure monitoring • Operation possible either autonomously or integrated into systems • Interface for external programmable logic controller (PLC) realizable via GESIPA® interface...