ballast

...We manufacture filter elements for the filtration of water, chemicals, and plastics according to customer specifications. We use corrosion- and heat-resistant materials in the range of 2–600 µm filter fineness. Large filters, such as ballast filters, are assembled from multiple sections.

...For a variety of application the customer will need balls with a heavy ballast core. These come in natural rubber or polyurethane quality. FDA approved Extra weight Metal core The Arubis ballast balls are balls with a steel core. These rubber balls in PU rubber are FDA approved and can be produced in many types of rubber.

...Using wind tunnel tests, this PV mounting system has been optimized for ballast and aerodynamics, ensuring a particularly secure flat roof installation without penetrating the roof membrane. It is available in a simple horizontal south orientation and as an east-west system.

...Welded structures for ballast water exchange on ships operate based on various principles. A pressure reactor is used for the neutralization of ballast water waste, effectively eliminating bacteria present in the water and preventing the transfer of marine organisms to other ecosystems. In the production of ballast water exchange systems, acid-resistant stainless steel and carbon steel protected...

...Rail Cleaning Brushes and Ballast Brush replacements are available to suit specific machinery. We cater for all types of cleaning processes and removal of detritus from the lines.

...The base rail for the S-Dome 6.10 system from K2 is suitable for south-facing flat roofs. It is made of aluminum and is 1.45 meters long. The base rail set is delivered pre-assembled including end plate, dome SD and mat. The Mat S consists of EPDM and absorbs or compensates for tolerances. High coefficients of friction reduce the ballast. ITEM NUMBER:MO-6214...

...Aerocompact offers innovative mounting systems for solar installations. Their solutions include ballast-free flat roof and racking systems for pitched roofs. They are lightweight, space-saving, and easy to install, optimizing solar energy harvesting and making them ideal for commercial and industrial applications.

...From coloring in the textile industry to the processing of ballast water in maritime applications, the Flow-Through Cell is the chamber solution for flowing media and can be designed to meet specific requirements.

...Bucket in painted sheet with forkable base to sweep the snow. On request it is possible to apply a ballast box. FIXED model width 1400 mm: B315 - width 1400 mm, (dimensions 1415x1330x740 mm, weight 121 kg) fixed with double life interchangeable steel wiper ADJUSTABLE models width 1500-2300 mm: snow plow rotation RH and LH to 5 positions of degrees 5 ° - 15 ° - 30 ° B315ORG - width 1500...

...The Duplex® with a diameter of 56 cm is designed for heavy tractors and high speeds. Suitable for light, sandy soils as well as heavy clay. Reduces work processes and costs. Optimal seedbed. Active working weight instead of dead ballast - our front packers are effective assets in soil cultivation. Without a disturbing steering frame. They preserve structures and create ideal sowing conditions...

...With a pulling force of 650 kp and a lifting speed of 8 m/min, the GEDA AB 650 M material hoist ensures efficient and reliable material transport along the facade. Various rope lengths, optionally available extension cables, roof jibs (available with 2.0 or 2.8 meters of outreach), and ballast weights make the hoist adaptable to the conditions and requirements on site. For transporting larger...

...Triangle ballast bag for the SGP (spare part) SKU: 28...

...The Aquaturbo MIX-GS is a hyperboloid bottom mixer. A large diameter conical wheel, equipped with upper blades, is installed at the bottom of the basin and driven by a gear motor. The MIX-GS offers exceptional 360° mixing performance throughout the basin and prevents sedimentation, ensuring minimal consumption. A non-clogging design and the use of robust materials minimize operating and maintenance costs. The MIX-GS is available in several configurations: bridge-mounted installation, tower-mounted installation, or in a submersible version on a ballast plate.

...The PA 20 is a double-sided tool carrier on which various tools from the Lotti series can be mounted. It can be attached at the front to both the tractor ballast and a front lift, making it very useful for row cleaning and leaf wall maintenance.

...The DMK 457 pressure transmitter with ceramic sensor has been developed for typical applications in shipbuilding and offshore facilities. It serves as an alternative to our DMP 457 pressure transmitter with piezoresistive stainless steel sensor. In conjunction with the copper-nickel alloy, the DMK 457 is suitable for seawater, e.g., for level measurement in ballast tanks, etc. Features...

...On top of the usual simplicity and reliability, this latest version is mounted with a larger gap to the roofing to allow optimum water drainage, compensate roof unevenness and simplify cable management. Additional ballast trays are compatible with the entire range of systems. Where high winds are an issue, extra ballast can be added, and the burden on all points of contact to the roof surface is...

...Two-stage high-performance rotary vane pump with a suction capacity of up to 22 m³/h With 3-phase motor With temperature sensor (bimetal) for optimal motor protection Integrated gas ballast and HV safety valve For all applications in rough and fine vacuum areas Special feature: Worldwide use due to various motor voltages...

...The AIRPURION 48 system, with a radiation width of 380 mm, consists of a matte anodized aluminum profile with matching cover plates. The lamp compartment is equipped with a reflector made of pure polished aluminum. The wiring and electronic ballast are located at the rear. The high radiation intensity ensures a high efficiency despite its compact design. Wall or ceiling mounting can be done using...

...Weights for ballast belts (SUB) 500 g, 1000 g, 2000 g...

... time with the UV Energy. In addition to the lamp array the Bio-Wall is equipped with a ballast housing which is usually located on the outside of the duct adjacent to the Biowall array on the inside. The ballast box has contacts enabling connection to a BMS system for remote monitoring and switching.

... performance, the iFIX S Deflector 2100 represents an optimal solution for increasing system safety and efficiency. Key Features Effective Wind Deflection: The iFIX S Deflector 2100 is designed to direct wind over the photovoltaic modules, thereby reducing the need for additional ballast. Easy Installation: The deflector can be easily integrated into the existing iFIX S mounting system by sliding it into the iFIX S Connector. This ensures quick and tool-free assembly. Product Number:202206 Manufacturer:voestalpine...

... parabolic reflector • 360 Degree Beam Pattern • All materials used are tested to resist intense UVC radiation • Specific electronic ballast for UV-C ray lamps • Protected against dust and water (IP55) • CE trademark (LVD 73/23 – EMC 89/336 – MD 93/42) • Complies with the noise standards of Directive 2006/42/EC • Values measured according to UNI EN ISO 3746 • Non-detectable and non-transmissible vibration values • Suitable for class 1 installations – protected areas...

...Lead bricks are the most widely used for weight such as ballast, as well as for Coves and radioactive materials and nuclear shielding. They are produced that Lead fluid is casting to the moulds There are several reasons why prefer lead bricks: Easy to stack and unstack Easy to relocate Provide maximum protection.

...Powerful machine light, dust and splash-proof. • Electronic ballast to avoid stroboscopic effects, meaning the apparent standstill of rotating parts. Reduced risk of accidents! Flicker-free light. • Compact lamp head - remains pleasantly cool even during continuous operation. • Concentrated light through high-quality parabolic reflector.

...The PURIMAR System has been designed and manufactured to meet IMO's requirements for Ballast Water Management System. At ballasting, the ballast water treatment process performed bt the PURIMAR System comprises two main unit operations : 1. mechanical separation(filtering) and 2. disinfection(electrolysis based chlorination). In the first step, the filter(50㎛ filter fineness) removes particles...

... during last decade, eliminating known defects of many of them and focusing on sound technologies that avoid a single day’s delay in vessel schedule SKF’s BlueSonic retrofits are based on 360° project management, i.e. from system design, 3D-scanning, installation on board (incl. piping & wiring) to integration into the existing Ballast Water System, Class-Certification, crew training and the 24/7 availability of SKF’s global network. ...

...This floating barrier consists of a series of flexible foam buoyancy tubes made from closed-cell foam, inserted into waterproof envelopes made of PVC-coated polyester fabric treated for hydrocarbons (900g/m2). It is reinforced with a galvanized marine steel ballast chain running the entire length. The compartmentalization of the elements allows this skirted barrier to follow the movements on the...

...Email : trasmme@gmail.com SKYPE : TRAS MM ============================== LEAD INGOTS Often lead ingots are purchased by enthusiasts who wish to cast their own items, such as lead bullets and lead fishing sinkers and other lead ballast applications. Care should be taken when casting with lead. Melting lead and casting lead objects can expose you and others in the area to lead, which...

Surface technology from the inventor of mass finishing Walther Trowal has been developing and producing process solutions for surface treatment since 1931. Starting from the mass finishing technique – the term "Trowalizing" is derived from "Trommel Walther" – Walther Trowal has continuously expanded its range of offerings. This has led to a variety of systems and machines for mass finishing and bl...