3 in 1 cable

...Charge all kinds of smart devices just with 1 cable. Short length avoides kontting. Big logo surface illuminates your brand with LED light. USB Type:Lighting/Micro/TypeC Function:Charging LED LOGO:Support Material:ABS+PVC Length:20cm or negotiable Weight:30g Color:Black LED Color:White...

...Areas of Usage: These multi-strand bare copper or tinned copper multi-core cables, produced in accordance with ISO 6722-1 CLASS B and CLASS C, are used in the installation of motor vehicles. PRODUCT CODE:FRY725 CORE NUMBERS x CROSS SECTION (mm²):7x,2,5 STRANDED COPPER CONDUCTER (N/mm):50X0,26 INSULATION MATERIAL AND DIAMETER(mm ±0,05):PVC (according to ISO 6722-1, CLASS B) 3,0 INSULATION THICKNESS (mm):0,30 SHEATH THICKNESS (mm):0,80 OVERALL DIAMETER:10,70 CONDUCTOR RESISTANCE:<7,6 Ω/km WORKING TEMPERATURE:-40 to +105°C...

...Air Dielectric cable used as feeder cable for broadcast transmitting system.

... standard NF C 93-529 Identification of conductors Assembly in pairs Armored with 2 steel strips arranged in a helix Copper drain under tinned shield Ø 0.45mm Outer sheath: gray PVC Ø 10.5mm Cable weight: 172 kg/km Maximum operating voltage: 300 V Maximum permissible current: 3A / mm² Maximum core resistance: < or = 96 Ohm/km Minimum insulation resistance: > or = 1500 MOhm/km Mutual capacitance: < or = 80 nF/km at 800 Hz Pair/pair capacitance imbalance: < 300pF/500m Impedance: +/-100 Ohm at 1 MHz Attenuation at 2 MHz: 4.2dB/100m Ref:SYT2.3.20G...

... crimp connectors. Suitable for tube or crimp cable lugs for fine-stranded conductors according to DIN EN 60228, or VDE 0295 Class 5 and 6. The cable is suitable for fixed installation in dry, damp, and wet rooms, for outdoor use, and directly in the ground. Additionally, the cables are particularly suitable for flexible use without additional mechanical stress.

...Owing to their small cross-sectional dimensions, MicroCoils are most often connected at both ends and do not permit the addition of a thermocouple. We prefer to use nickel as the sheath material here because it combines the best thermal conduction properties, high corrosion resistance and excellent deformation properties. To ensure that the standard 1000 mm PTFE-insulated connection cable can be...

... as custom special solutions. 1. Product Portfolio • Cable support systems • Wire mesh trays • Cable troughs • Cable guides • Cable channels 2. Wire Types • Bare wire • Pre-galvanized wire • Galvanically galvanized wire • Galfan wire • Stainless steel wire 3. Wire Diameter • e.g., standard sizes from 3.0-5.0 mm 4. Wire Mesh Dimensions • e.g., external dimensions from 500x100 mm...

...3-in-1 USB Cable (Type C, Micro USB & Lightning to Type A) Power: 2A Length: 1m Material: PVC Ref: KC3IN1PB Color: Black Dimensions (w x d x h) in mm: 1m Fast Charge Compatible: No Accessory: Data Cable Packaging: Blister Pack Status: Original Output Current: 2A Connectors: Type A, Lightning, Type-C, Micro USB Type of Accessory: Charger and Connectivity...

...on and off delay, and hysteresis can be freely set within the measurement range. Switching points: -20 ... +125°C, adjustable Connection: G ½, G ¾ AG, ½", ¾" NPT stainless steel Display: 3-digit LED Electrical connection: M12 x 1 connector or cable Power supply: 24 VDC Contact: 1 or 2 semiconductor PNP/NPN, normally open or normally closed adjustable Accuracy: ±0.5°C (-10 ... +85°C)...

... conditions (www.igus.de/cf-garantie) - No minimum order value, from 1 meter - No cutting costs - No packaging costs Typical mechanical application areas include: - Free-hanging travel paths and up to 100 meters in sliding applications - Preferably indoor applications, but also outdoor at temperatures > 5 °C - Storage and retrieval devices, processing/packaging machines, handling, indoor cranes Bending radius energy chain: 7.5 x d Travel speed free-hanging: 5 m/s Travel speed sliding: 3 m/s...

...Single-pole conductor rail for preferably straight track layout. Important Features • High availability even in robust operating environments due to sturdy construction and different conductor materials • Safety for people and machines through insulation of individual poles • Easy and precise installation with combinable multi-pole rail holders (3, 4, and 5 poles) • Unlimited number of poles...

...1) High-quality shelves for enhanced workplace safety and durability - made in Germany 2) Customized planning and consulting service, with an optional professional assembly service for optimal safety 3) Available in braked (e.g., for use with machine-driven unwinding or winding machines) and unbraked versions (unbraked only for manual operation)...

...Type 2-Type 2 5m 3 Phases 32A Type 2-Type 1 5m 1 Phase 32A Type 2-Type 2 5m 1 Phase 32A Type 2-Type 2 7m 1 Phase 32A Handle Type 1/Type 2 white/black Black/white cable hanger...

...The LevelEx is available in sizes M16 to M63 or with NPT threads from 3/8" to 2 1/2". PFLITSCH manufactures the cable gland bodies from uncoated brass, galvanized nickel-plated brass, and corrosion-resistant stainless steel. The LevelEx achieves protection classes IP 66 and IP 68 and complies with the explosion protection types increased safety "Ex-e" and pressure-resistant encapsulation "Ex-d...

...The STF-M sleeve is a special formulation based on polyolefin that offers excellent mechanical and electrical properties. It is available in diameters ranging from 8 to 350 mm before shrinking. It is particularly suitable for mechanical protection and sealing of cable splices, as well as electrical insulation for low voltage applications. It can be delivered with or without an internal adhesive or sealant layer. Shrink Ratio: 3:1 Operating Temperature: -55°C to +110°C Minimum Shrink Temperature: > 120°C Standards: ROHS Flame Retardant: No Type: STF-M...

... production process is wound on special wooden and other coils with an indication of the weight, diameter, length and date of manufacture. The rope is manufactured in a lubricant specially for work with increased friction or wear. The steel cable is in demand in lifting vehicles, elevators, winches, cranes, overhead roads, overpasses, current collector lines and service stations. It is used to make...

... are in brackets): • Water (25 litres) • Fluid Cable (6 kg) • Hydraulic binder (100 kg) • Then gradually add the remaining water. Add extra water, if strictly necessary, and proceed with mixing until you obtain a homogeneous lump-free fluid grout that is injectable without superficial bleeding. Use suitable mechanical mixers and mix for at least 5-6 minutes. The mixing time can be reduced to 2-3...

... galvanized steel wire ropes ranging from fine wire ropes to lighting ropes or wire ropes for spreading sliders, up to robust forestry ropes, with diameters from 0.6 to 26 mm in rope strength classes 390, 1570, 1770, 1960, 2160, 2300, and 2400 N/mm² (further strengths available upon request) in the following common constructions: - 6x7+FC - 6x7+WSC (7x7) - 6x19+FC - 6x19+WSC (7x19) - 6x37+FC - 6x37+WSC (7x37) - 6x36WS+FC - 6x36WS+IWRC (7x36WS) - 8x7+FC - 8x7+WSC (9x7) - 18x7+FC - 18x7+WSC (19x7) further constructions available upon request.

... for exceptional luminous efficiency. Set of spots compatible with the management module for spots. The spot must be connected to the management module sold separately on the site. Integrated cable length: 2 x 1.5 m. Spot diameter: 5 cm. Drilling diameter: 4.5 cm. Height: 1.8 cm. SKU: MSN9V3X3W-1 WEIGHT: 0.3 kg...

...Handpiece ESS 3-50 (Slim) ***SE 50 Silent Grinder*** The new micro grinder with electric micromotor from BIAX - lightweight, low vibration, extremely quiet! Technical specifications of the handpiece: Diameter: max. Ø 29 mm Length: 162 mm Weight without cable: 240 g Runout accuracy: < 0.02 mm Collets: 3.0 mm (Standard) / 2.35 mm (Optional) Tool change: Quick clamping Cooling: Closed (for all...

...The WADI one nickel-plated cable glands provide a perfect cable entry solution for a wide variety of applications. Properties: — perfect hold and total insulation of the cable — integrated cable anchoring — high clamping capacity — for a wide range of cables from 3 to 52 mm in diameter — easy to adapt to larger cables — temperature range -40 °C / +100 °C (dynamic) — protection type IP66 / IP68 up to 15 bar (30 min.) / IP69 — with NPT thread from 1/4" to 2" Material: Nickel-plated brass Protection type: IP66 / IP68 up to 15 bar (30 min.) / IP69 For cable diameter: 3 - 52 mm...

...METAL BODY Size: 104 x 30 cm Height: 130 cm Cap's Diameter: 30 cm Cap's Height: 22 cm Adjustable Height Base Plate Diameter: 10 cm Base Plate Height: 6 cm Length of Cable: 90 cm Socket Type: 3 x E 27 Max 40 W Includes Setup Instructions and Connecting Apparatus IP Code: IP20 Number of Packages: 1 EAN CODE:8681875500431 CODE:892OPV1559 COLOR:Black PACKAGING SIZE - X (cm):85 PACKAGING SIZE - Y (cm):30 PACKAGING SIZE - Z (cm):44 WEIGHT (Kg):2.100 M³:0.112200...

...A versatile 4-in-1 device made from ABS, PP, and fabric. Its bold design allows it to be used as a mobile phone stand, as well as a 3-level intensity lamp with a 10W wireless charger with a 1200mAh capacity, 5V/2.1A and 9V/1.67A input, and 5V/1A and 9V/1.2A output. Delivered in a black gift box with a charging cable. ø205 x 50 mm.

... interface (2 interfaces max.):2 asynchronous serial interfaces RS232; galvanically not isolated 3 inputs, 4 outputs; not potential Application programs:Counting Toggling weight/unit Tolerance control with bar graph and LED display red/green/yellow Tota Metrology:incl. metrologically approved data storage Units/ weight value:Display of weight value in kg, lb or oz Memory:1 storage slots for set points, tolerance limits, and tares EC type approval:NAWI (non-automatic, electro-mechanical weighing instrument); 1 kg - 120,000 kg, accuracy class III,...

... in a variety of different scenarios. Key Features IEC 61851-1 Mode 3 fast charger 5M Type 2 Tethered cable 6mA DC integrated protection for DC leakage (RCM) Available for 1-phase or 3-phase systems 16A or 32A configuration (3.7kW to 22kW) Supports adjustable current up to rated max Front LED status indicators (ready, charge, Fault) Compact and simple to install to a wall or...

...With the latest motion control technology for productivity optimization! Benefits 1. Intelligent cable management 2. Compact & flexible installation 3. Easy programming 4. Flexible application 5. Integrated software PLC Four tasks – One solution Automatic loading and unloading of workpieces, shafts, cast parts, and bars with a footprint of only 2.25 x 2.25 meters. Power for innovative...

...The 12437 Waveguide Dehydrator, designed for cable pressurisation applications, has proved successful in numerous aerial and waveguide applications, and a low-pressure version has evolved. This unit is the same as its higher-pressure counterpart, but for an output regulator, and gauge which are more accurate within the 0.5 to 3 p.s.i. pressure band. This dehydrator uses an efficient 1/3 HP...

...Input current at nominal output kW and service cycle - 1.7kW at 100% - 2.4kW at 60% - 4.0kW at 25% Input voltage 230 V ± 15% single-phase Frequency 50/60Hz Welding current range 10-150A** Maximum open circuit voltage 90 Vdc Fuse (time delay) or Circuit Breaker (type D) AmP. 16A Input current cable 3 x 1.5 mm2 Type of plug (supplied with the machine) 16A / 250V Height x Width x Length (mm) 205 x 130 x 300 Weight (kg) 4.2 Type of weldable metals: Steel source Product type: Welding machine Reference: 297.B18256-1...

...LWL Network Cable LC-SC; OM4 (Laser Optimized) Multimode (50/125µ) Duplex ■ designed for use in offices, industry, and data centers ■ equipped with an SC-Duplex connector and an ST-Duplex connector including dust cap ■ the cable jacket is halogen-free and flame-retardant ■ each cable includes a test protocol ■ max. transmission range: ■100 Mbit/s: OM2/3/4 = 500m ■1 Gbit/s: OM2 = 500m; OM3/OM4 = 1100m ■10 Gbit/s: OM2 = 82m; OM3 = 300m; OM4 = 550m...

... difference between driver and receiver. LVDS can tolerate at least ±1 V ground difference. High immunity to induced noise because of differential signalling normally using twisted-pair cable. Low EMI because small equal and opposite currents create small electromagnetic fields which tend to cancel one another out. Not dependent upon particular device supply voltages. Simple 100 Ohms termination at receiver. Power consumption is typically 50 mW per driver receiver pair for LVDS compared to 120 mW for ECL or PECL. ...