Germany
Manufacturer/ Producer
VISCOTEC PUMPEN- U. DOSIERTECHNIK GMBH
Germany
ViscoTec Dispenser 3VMP18 as a volumetric dosing pump for larger volumes ensures an even and reliable product supply of viscous, structure-sensitive and solids-laden products - with a repeatability of +/- 1 %! Absolutely precise, uniform and reliable dosing of various media and handling of larger volumes. Alternating opening chambers ensure gentle product transport and pulsation-free output. Your advantages: - no dripping or thread pulling due to programmable retraction - direct linearity between spread rate and speed - constant dosing volume even with fluctuations in density, viscosity and temperature - reliable dosing without heating the medium - drive with servo or three-phase motor - easy programming of quantity and speed - low maintenance, quick disassembly - free inlet possible, as self-priming operation
Request for a quoteVISCOTEC PUMPEN- U. DOSIERTECHNIK GMBH
Germany
ViscoTec Dispenser 3VMP22 as a volumetric dosing pump for larger volumes ensures an even and reliable product supply of viscous, structure-sensitive and solids-laden products - with a repeatability of +/- 1 %! Absolutely precise, uniform and reliable dosing of various media and handling of larger volumes. Alternating opening chambers ensure gentle product transport and pulsation-free output. Your advantages: - no dripping or thread pulling due to programmable retraction - direct linearity between spread rate and speed - constant dosing volume even with fluctuations in density, viscosity and temperature - reliable dosing without heating the medium - drive with servo or three-phase motor - easy programming of quantity and speed - low maintenance, quick disassembly - free inlet possible, as self-priming mode of operation
Request for a quoteVISCOTEC PUMPEN- U. DOSIERTECHNIK GMBH
Germany
Precise atomisation and spraying can be continuous or selective. The revolutionary combination of continuous flask and low-flow spray chamber guarantees perfect spraying of low to highly viscous media with high edge sharpness and minimum overspray. Fields of activity: - Dosing - Coating - Microsputtering - Lubrication - Marking and much more. Materials: - Fats/oils - Colours - Activators/primers - Abrasive materials - Adhesives - Silicones - Solid-laden materials and much more. Advantages: - Constant quantity/area - Uniform spray pattern - Uniform coating - Little overspray/high edge sharpness - Defined volume per revolution - High chemical resistance - High spread - Adjustable round jet - From dot spraying to continuous spraying - Low-maintenance system - flow rate of the medium and atomising air can be regulated independently - High application efficiency
Request for a quoteVISCOTEC PUMPEN- U. DOSIERTECHNIK GMBH
Germany
Examples of materials for dosing: 1- and 2-component epoxy, UV / light-curing / thermosetting adhesives, highly filled materials, anaerobic adhesives, shear-sensitive adhesives, heat-conducting paste, sealants, flavourings, silver conductive paste, flux, perfume, isopropanol, industrial oils, silicone, alcohol, grease, paint and ink, MEK, braze paste, PU, acetone, petrol and many others. The preeflow® eco-DUO is a rotating, absolutely pressure-tight displacement system consisting of a self-sealing rotor and stator. The controlled rotary movement of the rotor generates the flow by displacing the medium in the stator. Pumping without changing the medium is guaranteed. As the material can also be conveyed backwards, preeflow® guarantees a clean, controlled material or medium tear-off without dripping. Application: - point dosing, with highest volumetric accuracy - bead application with application speed adjustable to the web speed - Potting technology
Request for a quoteVISCOTEC PUMPEN- U. DOSIERTECHNIK GMBH
Germany
The eco-PEN330 precision volume dispenser made by ViscoTec enables many applications in the low to high viscosity dispensing range. The preeflow® eco-PEN is a rotating, absolutely pressure-tight displacement system consisting of a self-sealing rotor and stator. The controlled rotary movement of the rotor generates the flow by displacing the medium in the stator. Pumping without changing the medium is guaranteed. As the material can also be conveyed backwards, preeflow® guarantees a clean, controlled material or medium tear-off without dripping. - True volumetric dosing - Retreat effect - Viscosity-independent dosing - Easy cleaning - dosing independent of inlet pressure - Adjustable dosing flow - Pressure-tight without valve - Dosing pressures from 16 to 20 bar
Request for a quoteVISCOTEC PUMPEN- U. DOSIERTECHNIK GMBH
Germany
In order to avoid chemical reactions such as curing or crystallization during the dosing process, any contact with metal in the area in contact with the material in the dispenser was avoided. The materials used have been carefully selected: On the one hand with regard to chemical resistance to adhesives and other fluids and on the other hand with regard to highest resistance to physical wear by abrasive media. Highly reactive materials such as sulfuric acid, anaerobic UV curing acrylates and electrolytes require special treatment. They can be dosed with highest accuracy and best repeatability. The new metal-free dispenser can be easily installed on existing ViscoTec drive technologies and offers the same advantages as other proven dispensers from the portfolio of the dosing technology specialist. The metal-free dispenser is available in many sizes.
Request for a quoteVISCOTEC PUMPEN- U. DOSIERTECHNIK GMBH
Germany
▪ Contactless application ▪ Suitable for lubricants, greases, anaerobic and other adhesives ▪ Materials with low as well as high viscosity applicable ▪ vipro-SPIN feeded by ViscoTec 3RD3 or 3RD4 dispenser ▪ Four different spinning heads available ▪ Continuous spraying ▪ Easy integrateable to different control unit systems due to open end cable
Request for a quoteVISCOTEC PUMPEN- U. DOSIERTECHNIK GMBH
Germany
The preeflow® controllers simplify every dispensing process. They are perfectly matched for all dispensers within the eco-PEN, eco-DUO and eco-SPRAY series. The eco-CONTROL EC200 2.0 serves primarily to control and parameterize the preeflow® dispensers. In addition, pressure monitoring is carried out by the controller for a reliable process with precise dispensing results. The control unit can be easily integrated into fully automatic systems and meets all requirements of modern dispensing processes. The eco-CONTROL EC200 2.0 offers a compact solution with an integrated power supply unit. The control unit also offers options for pressure and temperature monitoring, 100 program memory locations and enables fast and clean storage of programs. The control unit can also be integrated with PLC systems.
Request for a quoteVISCOTEC PUMPEN- U. DOSIERTECHNIK GMBH
Germany
▪ Intermittent recording and storage of one or two pressure signals ▪ Evaluation of pressure signals using previously defined limit curves/ranges (“teach in”) ▪ Easy and intuitive operation ▪ 5” colour touch screen ▪ Voltage signal processing (0 – 10 V) ▪ Compatible with flowplus16 and flowplus-SPT M6 ▪ Easy assembly (plug & play and start up) ▪ Data backup with USB stick possible
Request for a quoteVISCOTEC PUMPEN- U. DOSIERTECHNIK GMBH
Germany
▪ Modular setup with five different available dispenser sizes on each side ▪ Static mixing of two materials with same or different viscosities ▪ Adjustment of the desired mixing ratio by adjusting the speed ratio of both dispensers ▪ Volumetric dosing, regardless of viscosity ▪ For low to high viscosity materials ▪ Particularly suitable for abrasive, filled or shear sensitive materials ▪ Continuous dosing, pulsation free ▪ Interior non-stick coated ▪ Linear relation between dosing volume and rotation speed ▪ Programmable suck-back prevents dripping or stringing of product ▪ Different rotor and stator materials available as standard ▪ Long service life due to application-specific rotor-stator combinations ▪ Easy cleaning and maintenance due to quick assembly and disassembly options ▪ Mixing ratio 1:1 - 100:1 ▪ Volume flow of 0 - 1,300 ml/min (depending on mixing ratio, material and dispenser combination)
Request for a quoteManufacturer/ Producer
Amperstraße 13
84513 Töging A. Inn - Germany