Germany
Manufacturer/ Producer
Germany
Machines for assembly and testing In order to comply with current quality asssurance standards, all production steps should be guided and controlled within defined tolerance levels and these values must be effctively documented. The ULBRICH Q-Control press system caters for the guidance and control of the press run with analysis of the force/distance curve and pre-set values.
Germany
Outside – "tool" – rotary table The C-frame press with outside-rotary-table is a tool-change-system in the actual sense. According to the table size as well a the tool-size there could be up to 16 tools installed. Once installed you save expensive change-times with small-series including the full qualitiy control and assurance standards of ULBRICH Q-Control
Germany
Inside rotary table At the C-frame press with inner-rotary-table turns the table with the workpiece. Each individual stations can be as a magazine or as an additional workstation. With the inner-rotary-table large series can be quick and simply assembled with full qualitiy control and assurance standards of ULBRICH Q-Control
Germany
Our column-presses are designed per customer-specification. All movement-patterns are documented and can as also be represented graphically and numerically.
Germany
Ulbrich spring test machines are developed specifically for the railroad-industry. They are in the use in workshops as well as at spring manufacturers. Beside the classic coil spring, leaf springs, parabolic-feathers and also rubber springs be tested a the same machine. According to implementation, the axial stiff-ness as well as the transversal (horizontal) stiff-ness and its direction can be measured.ir direction. An individual test-programs can be in simply way produced with our software.
Germany
With the ULBRICH shock absorber test machine shock absorber can be tested according theisr individual mouting position. The test run is based on the OEM specifications, the National Railway Regulationss and/or in accordance to the European Norm. It is essentialy an impact with a sine wave speed profile. According to his demand the customer can choose between a pure shock absorber test machine or combination of shock absorber and spring test machine. › download movie (MP4, ca. 26,4 MB)
Germany
Force and positional monitoring test machine for determination of the spring characteristic on air springs including leakage test.
Germany
The lifting equipment consists of two mobile boogies. Integrated within the superstructure is a hydraulic power pack which drives the two hydraulic cylinders. The cylinders are situated in the highly robust and laterally adjustable lifting blocks. The lifting blocks and the jack contact surfaces (lifting points) can be repositioned along the cross-beam via a spindle. This allows the flexibility to lift and control a number of different types of Locomotive and carriage. Once the carriage has been lifted, the lifting blocks can be locked out using safety bolts which ensure that the height selected is safely maintained. The position of the safety bolts themselves can also be controlled by sensors. An optional function to weigh and calculate the centre of gravity is available upon request. Here, the lifting blocks have been fitted out with “load cells“, which can transfer the load input into a unit of weight. With the accompanying software these values can be evaluated in order to determi
Germany
Mobile Puller with 100 to press force with integrated acetylene-compressed air ring burner or high pressure hydraulic power pack. The solution with integrated acetylene-compressed air ring-burner is specially developped for wheel-disk without oil-pressure-drilling. While the solution with the high pressure-hydraulic power pack is put into action on wheel-disks with oil-pressure-drilling. It is also possible to have a puller with both solution combined.
Germany
This Test maschine was developed specifically for the commitment in maintenance shops of streetcars, suburban trains and subway. This system is able to test shock absorbers in every mounting-situationand also coils springs up to a force of 50kN. Already with a few movements the shock absorber test machine turns into a spring test machine.
Manufacturer/ Producer
Im Vogelsang 10
79539 Lörrach - Germany
Germany
The RUF briquetting systems of the Biomass series process dust, shavings and wooden chips into briquettes of consistently high quality and density. Varying bulk densities are offset automatically during the process. These materials can be pressed into a compact form without the use of binders. It is important that the moisture content of the chips is below 15%, preferably under 12%, and that the chip size does not exceed 50mm. The general rule is that the finer the material is, the smoother and more solid the surfaces and edges of the resulting briquette. The systems can be equipped with a multitude of options, thus optimally adapting them to customer needs. This series offers maximum flexibility. All systems are extremely energy efficient thanks to the innovative RUF hydraulic system. Depending on the model, the machines are equipped with motors ranging between 4 kW and 90 kW. The throughput capacities of the RUF Biomass presses range between 50 and 1,300 kg/h.
Request for a quoteFrance
A flow straightener greatly reduces disturbances in a flow while a conditioner reduces disturbances and also allows a good redistribution of the speed profile, at each point of the section of the pipe. Thus, these devices make it possible to reduce the upstream straight lengths and to improve the measurement accuracy in the case of a flow measurement. They are therefore to be positioned between a pipe fitting (elbow, reduction, etc.) and a flow measurement element while respecting the distances specified in the standard.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.