TROTEC GMBH

IDS 30 OIL HEATER FANMobile heating power on wheels: The IDS 20 D direct heaters for fast, uncomplicated heating With robust design, the oil heater IDS 30 has everything you need for an economic and effective heating application. This device from the IDS pro series is very flexible. On the one hand, its carriage with big wheels enables a quick transport and easy set-up even on building sites and uneven terrain. On the other hand, there is no need for an external oil tank because of the integrated fuel container. The oil heater fan is originally "Made in Europe" and as standard equipped with electronic flame trap, safety thermostat for overheating protection and fully automatic after-cooling. Additionally, the double-walled housing with protective coating increases safety at work by minimizing the surface temperature of the outer casing and thus the risk of injuries and further offers an effective soundproofing.

The indirect oil heater fan IDS 30 F was specifically developed for the mobile application as tent heater. This easily portable device has a robust frame with shock protection and handles as well as a hose connector already preassembled. We deliberately decided against integrating a tank in the IDS 30 F so that users can benefit from not only the lesser weight but also from time-saving loading since it is not necessary to drain the tank completely of residues. The absent tank also means that no additional transport or insurance documents are required for transport and storage. The fuel supply of the oil heater fan IDS 30 F can be effected either via a large external tank or jerrycan – appropriate accessories are available for both types of application. The heating device is prepared for fully automatic thermostat-controlled operation ex works. For use inside a tent, an external thermostat can be connected optionally using a cable of ten metres length.

Industrial desiccant dehumidifier TTR 2800 The stationary desiccant dehumidifier TTR 2800 impresses with a dehumidification performance of 376 kg / 24 h Humidity control at its best Even nearly 400 kilogrammes of dehumidification performance per day present no challenge for the TTR 2800 – not even in cold ambient conditions with low dew points. Therefore, the industrial desiccant dehumidifier is ideally suited for the most diverse air and gas dehumidification tasks in industrial, haulage or utility companies, for instance to secure products and production, for the value retention of machines, inventory and buildings through constant protection against corrosion, condensation or mould formation.

COMMERCIAL DEHUMIDIFIER TTK 650 SReliable technology and large drying capacity Black-white. Tip-top. Good and cheap. The TTK 650 S available exclusively at Trotec is of traditional EU manufacturing and demonstrates in a respectable way that a price level of the Far East is indeed compatible with robust brand quality. Using this powerful device for drying after water damages or for construction drying you can benefit from a budget-friendly dehumidification solution without compromising in terms of workmanship and reliability. Even frequently changing sites do not pose a problem to the TTK 650 S because thanks to the stable carriage construction with bar handle and large wheels for maximum mobility this dehumidifier can be transported quickly and easily from one site of application to the next.

DESICCANT DEHUMIDIFIER TTR 400 DThe mobile dehumidifier TTR 400 D: Maximum performance and double flexibility thanks to Duoventic The TTR 400 D desiccant dehumidifier not only impresses with its very good dehumidification performance even at low dew points well below 0 °C but also with maximum versatility due to the TTR Trisorp Dual principle of operation: Two separate air flows for dry and regeneration air with two separate fans for each circuit allow an efficient pressure-tolerant recirculation when setting up the dehumidifier outside as well as inside the room to be treated. Variable circulating air drying with the TTR 400 D ensures power-saving dehumidification at an increased drying rate: Compared to the "outdoor air" supplying the regeneration air, in contrast to conventional through-air operation, up to 30 °C lower dew point temperatures can be achieved with the TTR 400 D for a nominal dry air volume.

The MD200, manufactured by Trotech®, is a magnetometer suited for covered ferromagnetic metals locator such as valve caps and rods, hydrants, metallic manhole and tank covers, and the like. It is designed for environments like in the blazing heat, bitter cold, under water or in the snow to supply a location results that is accurate. It comes with a benefit of a covered ferromagnetic metal with a speedy detection and a reliability that prevents the detection of all non-magnetic metal objects due to its high sensitivity, and with an auto-manual adjustment that can function for 24 hours. Furthermore, a backlit display can be read easily along with a rotation function. It is designed to minimize discomfort and lightweight of only 830 g.

ELECTRIC HEATER FAN TDS 19 EFiery red mobile heater as a convenient all-round solution The red electric heater fan does not only have a fiery look, but also presents the ideal heating solution for construction trailers, indoor market stalls or smaller workshops. For the TDS 19 E can be employed at basically all locations where the use of oil and gas heating devices is undesirable or even prohibited, such as in unheated rooms. Thanks to the integrated power cable, all it takes to operate the mobile heater is a socket. The warm air flow generated by the TDS 19 E can be infinitely adjusted to the exact desired temperature, and its heat output can be regulated as needed using the two-stage power control. Beyond that, fan operation without heating function is also possible.

TTK 175 S COMMERCIAL DEHUMIDIFIERPowerful drying technology at the top of the game... The TTK 175 S impresses with a variety of detailed solutions which save you time, enhance your performance and secure value retention – attractively combined in the tried and tested German industrial design – protected prototype. All electrical components are also protected from dust and dampness by default. The special enclosure offers maximum protection of the electronic equipment from anything dangerous which may enter and impair the functionality and durability. This enclosure predestines the commercial dehumidifier for rough environments at various sites. Wheel it in and watch it work – powerful rotary compressor technology in a robust carriage design Thanks to the ergonomic construction and carriage design with a bar handle and large wheels, the TTK 175 S can easily be transported in construction site conditions or up and down stairs.

Universal construction dryer – newly definedWhether water damage restoration, construction drying or keeping cool commercial spaces dry – reliable drying technology is needed for alternating use on different construction sites. Extremely tough and fail-safe with a high dehumidification performance, even at cold ambient temperatures. This is exactly what characterizes the construction dryer TTK 500 from Trotec. This professional condenser dryer has been consistently designed to provide maximum mobility for ever-changing sites of operation and to withstand rough working conditions. This is why the TTK 500 features not only a carriage with adjustable push handle, but also large wheels with non-marking rubber tyres – all combined in a robust metal housing. For storage or transport, the design of the TTK 500 allows the devices to be positioned closely together, so that many construction dryers can be transported to the site of operation with only one trip.

COMMERCIAL DEHUMIDIFIER TTK 105 SThis robust lightweight makes a good impression even in rough surrounding conditions As to be expected from such a high-quality device of German manufacturing, the TTK 105 S impresses with a perfect combination of robust exterior and progressive interior. The hard-wearing power pack is provided with a stackable aluminium housing. This eases transport enormously – and handling, too: Instead of using unreferenced adjustment levels between minimum and maximum operation, with the TTK 105 S you can directly enter the desired humidity value via the digital display where the current temperature and humidity values of the room air can be read at all times. An integrated hygrostat implements the selected target fully automatically and adjusts the performance of compressor and two-staged fan.