TECNOSUD DI APICELLA F.

Connecting links for DIN ISO 606 duplex roller chains. By Form E, the spring clip must be mounted with the closed end facing the direction of movement. Offset links are required to close the chain if there is an odd number of links. Using offset links reduces the power and tensile strength by 20%.

Packaging unit 5 metres with odd number of links. Ending with an inner link at both ends. Connecting links must be ordered separately. Note Europeantype roller chains acc. to DIN ISO 606 with curved link plates (ISO No. 06 with straight links). All chains are prestretched. Initial lubrication anticorrosion mineral based oil. B7 = maximum value for links. Pitch = PxB1

Packaging unit 5 metres with odd number of links. Ending with an inner link at both ends. Connecting links must be ordered separately. Note Europeantype DIN ISO 606 roller chains with curved link plates (ISO No. 06 with straight links). All chains are prestretched. Not lubricated, the chains must be lubricated depending on the application. The stainless steel roller chains offer excellent corrosion protection and good chemical resistance. They can be used in applications with water and at high temperatures. B7 = maximum value for links. Pitch = PxB1

Even when securing the load, the lashing material must be protected from the “sharp edge“. Highvalue loads may not be damaged by lashing chains. The secutex SKKE simple edgeprotector is simply placed onto the chain via the slit on the reverse side, making it impossible to lose. The edgeprotector is light and flexible. Due to the low deadweight and flexible textile reinforcement, the edgeprotector can be attached easily and quickly to the load. Important note The secutex SKKE simple edgeprotector is not intended for prolonged use.