TAPPI STAMPATI S.R.L. - Since 1972 we have been designing and manufacturing caps and filler necks for fuel tanks

Filler necks internal bayonet coupling passage diameter 30 mm, in steel or galvanized steel, to be screwed, welded or pressed on tank. They are available in different lengths and possibly equipped with vent / breather connection. In the following section you will find the most common versions of internal bayonet filler necks passage diameter 30 mm: for more details, please refer to the product’s technical sheet. This products shall be sold in combination with all our internal bayonet tank caps passage diameter 30 mm. The careful selection of raw materials and the adoption of innovative and rigorous production processes allow us to always guarantee quality and reliability of our product. We perform several strength and durability tests and tests for product quality control during the various processing phases. On request we can issue the relevant certificates in compliance with national and CE regulations.

P3 filler neck male threaded, in steel or aluminium material, passage diameter 32 mm, to be welded on tanks or to be connected to flexible pipes for fuel, hydraulic oils and other fluids. This product is available in different materials and, on request, we can provide it with vent connection, removable filter or welded to a suitable fixing plate. P3 filler neck is supplied in combined with our P3, PGE and IGP threaded tank caps and it is generally used on tanks of construction and agriculture vehicles, such as earth moving machines and motor mowers, on machines for cleaning and environment and in fuel and oil tanks of special vehicles, such as go-karts and remote controlled model cars. For more details on the variants and threads of the filler neck P3 special thread, we invite you to consult the data sheets from the widget below. The use of accurate production processes in all phases and the careful selection of raw materials guarantee quality and reliability of our product over time.

Internal bayonet mechanical level gauge cap, passage diameter 40 mm, in plastic, steel and brass, complete with different types of sealing gasket in relation to the fluid in the tank. It’s available hermetic or ventilated and in different lengths (minimum 90 mm, maximum recommended 540 mm: for longer lengths we suggest you to directly contact the Technical Office). The construction characteristics of our liquid level indicators guarantee the non-deformability of the body in which float moves. This product is proposed in five different colors (black, blue, red, green and white), not only to meet aesthetic needs, but on the basis of various necessities in different fields of application. We can supply versions with customized dials, also with your company logo or writings (“Oil”, “Diesel”, “Fuel”, “Gas” or others on request).

G 1″.1/2 mechanical level gauge cap male threaded, in plastic, steel and brass, with different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated, in different lengths, also customizable (minimum 125 mm, maximum recommended 540 mm: for longer lengths we suggest you to directly contact the Technical Office). The construction characteristics of our liquid level indicators guarantee the non-deformability of the body in which float moves. This product is proposed in five different colors (black, blue, red, green and white), not only to meet aesthetic needs, but on the basis of various necessities in different fields of application. We can supply versions with customized dials, also with your company logo or writings (“Oil”, “Diesel”, “Fuel”, “Gas” or others on request).

Fixed mechanical level gauge in plastic, steel and brass, with different types of sealing gasket in relation to the fluid in the tank. It’s available hermetic or ventilated and in different lengths (minimum 90 mm, maximum recommended 540 mm: for longer lengths we suggest you to directly contact the Technical Office). The construction characteristics of our liquid level indicators guarantee the non-deformability of the body in which float moves. We can supply versions with customized dials, also with your company logo or writings (“Oil”, “Diesel”, “Fuel”, “Gas” or others on request). The new dial with 4 colors (green for full tank, red for reserve and black for intermediate levels, on white background) allows an optimal visualization of the fluid level in the tank. This mechanical liquid level gauge can be used with different inclinations up to the maximum recommended angle to the vertical of 20°.

Cases for deck filler 32-40-50 mm series in technopolymer, for connection to filling flexible hose with three different diameters: Ø 32 mm (for water) Ø 40 mm (for fuel) Ø 50 mm (for fuel). These niches are supplied in combination with three possible our internal bayonet tank caps passage diameter 40 mm: 240 tank cap AIR tank cap V7 S tank cap It’s available the new rectangular NBR sealing gasket, specifically designed for all our external plastic deck fill holders. This gasket provides a perfect seal without the need for sealants or silicone, thus making assembly, disassembly and maintenance operations faster. We can produce our flush-mount plastic compartments for plug housing in a wide range of colors (black, blue, red, green, white) to meet the most varied aesthetic requirements or allow a better identification of the type of fluid to be loaded into the tank.

Flush-mount niches 60 F series in technopolymer, for connection to filling fuel flexible hose Ø 60 mm. These niches are supplied in combination with three of our female threaded tank caps, passage diameter 54 mm: ALU 2″ tank cap ALU M60X2 tank cap M60X2 tank cap with key We can produce our flush-mount plastic compartments for plug housing in a wide range of colors (black, blue, red, green, white) to meet the most varied aesthetic requirements or allow a better identification of the type of fluid to be loaded into the tank. It’s available the new rectangular NBR sealing gasket, specifically designed for all our external plastic deck fill holders. This gasket provides a perfect seal without the need for sealants or silicone, thus making assembly, disassembly and maintenance operations faster.

Plastic Emergency stop push button switch protective cover with aluminium silkscreened plate. This product can be supplied in a wide range of colors (black, blue, red, green) for various needs in different application sectors. On request, we supply the protective niche already completed with emergency stop push button. New rectangular NBR sealing gasket, specifically designed for all our external plastic deck fill holders. This gasket provides a perfect seal without the need for sealants or silicone, thus making assembly, disassembly and maintenance operations faster Our plastic cover protector for stop Emergency push button allows it to be recessed near the machine control panel, as required by the EN ISO 13850: 2015 art. 4.5, in order to prevent accidental activation of the emergency stop device. Our niche is used in many application, such as generating sets soundproofed enclosures.

Combined fixing plates in steel or galvanised steel, to be welded or directly screwed on tanks of industrial machines or generating sets. The use of this fixing plates make easier and very faster the assembling operations of our fixed mechanical level gauge in combination with our bayonet tank cap passage diameter 40 mm. Combined fixing of tank cap and fixed level indicator allows to easily monitor the liquid level in the tank during the refueling. We also supply versions of single fixing plates and fixing plates for electronic level indicators or to connect flexible fuel filling hoses of various diameters. The careful selection of raw materials and the adoption of innovative and rigorous production processes allow us to always guarantee quality and reliability of our product. We perform several strength and durability tests and tests for product quality control during the various processing phases.

Inspection tank caps male threaded, in plastic material, complete with sealing gasket and fixing flange. We supply two different types of this product: Inspection cap for Ø 124 mm hole Inspection cap for Ø 215 mm hole We can also provide them equipped with safety chain. The inspection tank caps are generally used for canopies of power generators and on tanks of agricultural machines and industrial vehicles, spray dryer, water tanks and so on. We always guarantee quality and reliability of our product over time. We perform several strength and durability tests and tests for product quality control during the various processing phases. On request we can issue the relevant certificates in compliance with national and international regulations.