SPANSET SECUTEX GMBH

Even slight pressure points can negatively influence the static equilibrium of a highbay warehouse. Collision protection for shelf support protects against damage resulting from frontal collision. The hollow chambers in the impactresistant profile cushion the collision energy. The solidsteel profile on the inside prevents buckling.

Impact protection is screwed to the floor and serves as collision protection, e.g. on shelves, highspeed doors. The peripheral impactprotection cover absorbs the energy of collisions from forklifts and pallet trucks. As a result, longer service lifetimes can be achieved in comparison to conventional steel angles.

Again and again, coils with larger internal diameters than expected have to be processed on coilers. Here the secutex coiler sheath offers a simple and flexible solution to the problem. Enlargement of the internal diameter The handy secutex coiler sheath is simply pushed onto the coil mandrel and enlarges the radius to the required size. The timeconsuming assembly of subcomponents is no longer necessary. Prevention of dents Thanks to the high friction of the secutex material, the coil cannot slip and, in some cases, the contact pressure can be significantly reduced. The typical impressions in the initial winding layers are prevented and material wastage is significantly reduced. The secutex material is extremely wearresistant and, unlike standard rubber, is also oilresistant. The insertion tip helps thread the coils.

Wipers for steel bars In the production of pipes and steel bars, socalled wipers are used for cleaning. The wipers have a round or rectangular outer profile and an inner profile that matches the shape of the object to be cleaned. Normally, several wipers are mounted in series, whereby the passthrough openings are smaller than the profile. The bar is pushed through the elastomer plates at high velocity, and the rubbery material strips the surface free from grease and cleaning fluid residues. It is the edge that counts! Just a like a car window wiper, it is the edge that counts. Normally, the wipers are stamped from sheet goods. During stamping, the elastomer becomes distorted; the inner edge is therefore not dimensionally stable and is at an angle. Only part of the edge wipes emulsions from the surfaces depends on the profiles. This edge is rapidly worn down; the cleaning action is then unsatisfactory. Streakfree cleaning

Funnels for pipes and bright steel In the production of pipes and bright steel socalled funnels are used for threading in the production plants. In most cases funnels made of polyamide are used, but due to the material hardness and the sharpedged pipe ends wear out very quickly. It depends on the material sphere As an alternative, secutex offers polyurethane funnels for this purpose. In contrast to polyamide, these are softer from the material and therefore also more wearresistant than sharpedged pipe ends. This means longer service life for the customer as well as better surface protection for very sensitive materials. For every size secutex funnels can be produced in the required dimensions according to customer drawings.

Regrinding, repainting and remachining The flexible, but also durable, secutex – buffer pad provides reliable protection from expensive damage to your highvalue goods. Often the solution is paramount. Thanks to the integrated perforated plate, secutex – buffer pad can simply be bolted or welded. secutex is a highly wear resistant polyurethane, which was developed 30 years ago for lifting sharpedged components. In the years that followed, new solutions for materials protection and noise reduction were regularly constructed. Thus, today almostall bricks in Europe are moved using secutex protective coatings. secutex protection is almost the industry standard for the lifting and storage of sharpedged metal sheets. For us, health and safety at work is even more important than the prevention of damage to materials. Our expert advisers can present a number of innovative solutions to you whereby, using secutex – buffer pad, noise is prevented directly at source.

Damping effect Where forces collide, materials are often unintentionally damaged. Impact damage to goods and stock often occurs due to carelessness, negligence, recklessness, improper handling or a lack of protection. secutex – buffer pad has a damping effect everywhere where products can be damaged under their own weight or during handling. In addition, foam coatings and hollow sections, which deform under loading, increase the damping effect, such as, for example, in secutex – Soft, secutex – SoftPad and secutex – Hollow Profile. Antislip effect secutex prevents loads from slipping and slipping off during transport. In tests, secutex scored higher than all comparable materials. secutex not only meets the standard, it exceeds the friction coefficient values standard currently in force. For wet or oily surfaces we recommend secutex with textured surfaces. Direct material contact is thereby reestablished. Noisereducing effect

“Heat”resistant buffer pad For hot processing. Nonferrous metals, such as gold, copper or brass, get hot during processing and have a sensitive surface. Rollers and cylinders coated with secutex Heat protect bar stock during production; abrasion and run marks are reliably avoided. Operating temperature up to 140°C Apart from the positive mechanical and chemical properties, secutex Heat is an elastomer material for operating temperatures up to a maximum of 140°C. Operating temperature up to 180°C As an option, „Heat“ can be finished with an aramide fibre surface. The operating temperature thereby even increases to a maximum of 180°C.

Install impact protection For screwing and riveting secutex impact protection with an internal perforated plate can be screwed or riveted in different ways. You can achieve universal impact protection in no time at all. For welding Welding is often the easiest and fastest way of fastening. The various protruding perforated sheet designs allow a very versatile use. For gluing If screwing or welding is not possible, the impact protection can be glued with the secutex special adhesive. Cutting and sawing The secutex material can be sawed with a conventional band saw. The material tries to avoid the cutting tool. Make sure that the wedge angle is as small as possible and adjust the cutting speed if necessary. Milling Use commercially available milling cutters with a small number of teeth. Circumferential speed approx. 200400 m / min, clearance angle ∂ 10 °, clamping angle y 25 °. The use of a drilling emulsion is recommended for cooling and surface optimization. Rotate