SOC GUY RAPID BETON

COMPOSITION AND APPEARANCE Plaster-based powder filler, special cements, calcium carbonate, resin, cellulose fibre and various admixtures. The compound obtained is white in colour. TECHNICAL CHARACTERISTICS • Setting time : 30 to 40 minutes • Hardening time : 1 to 2 hours. • Second coating : after 3 hours • Adherence : complies with NFT 30 608 SUITABLE SURFACES All types of interior surfaces complies with DTU 59.1 : plaster, plasterboard, plaster blocks, concrete, cement coating, breeze blocks, cellular concrete, bricks, ceramic, old paintwork, old painted fibreglass, floor tiles, wall tiles, etc. COVERINGS After the filler has completely dried, it can be covered using all types of paints, plaster-based coatings, paste coatings, wallpaper paste. PREPARATION OF SURFACES Surfaces must comply with standard DTU 59.1 and be clean, dry and free from dust and any trace of separating agent. Correctly open up, bevel and dust off the cracks.

Our dry concrete is produced using marble aggregates extracted from our underground quarry, resulting in exclusive properties and a high level of quality to meet the most demanding needs of our clients." - Rapide Plus - Lime Mortar - Natural Hydraulic Lime NHL - 3.5 - Traditional NHL Mortar

- Washed Natural Sand 0/4 - Washed Natural Fine Sand 0/2 - Marble Sand - Marble Powder - 6/12 Chickpea Gravel (Crushed Gravel)

Self-levelling mortar based on cement, reinforced with fibres, modified by additives that give it the ability to be fluid and pumpable, especially intended for screeds and levelling of coverings with a thickness between 5 mm and 50 mm, which, once hardened, must be covered with coverings. USES Applicable on concrete or cement mortar supports. On supports with low porosity, apply a Fixmar Primer GR bonding primer beforehand. Regularisation of continuous screeds. Ideal in situations where a flat surface is required as a support for the subsequent application of another type of covering, such as parquet, carpet, ceramic, linoleum, ceramic materials, marble... Suitable for underfloor heating and as a finishing product for synthetic coverings.