Turkey
Manufacturer/ Producer
ROYAL GLASS TECHNICAL GLAZING SYSTEMS
Turkey
1.Loadbearing lower case profile within base surface of width is ; 54,5 mm, aforesaid other loadbearing profile; within upper case is 46,4 mm. Existence of these profiles inside; there are two channels operating separately from each other performing the duty of carrier. 2.Through vertical height of lower carrier; cubicle waterspout is implemented. The height of initial cubicle is 11 mm and is inclined. 3.By courtesy of trio cubicle profiles; the exterior is out of sight and air ingression is prevented directly. 4.Under favour of lenghtwise hair cord channel at case profile , hair cord might be implemented continuously. 5.Within moving wing profile; thanks to centering channel ; axial run outs are prevented. Additionally; carrier profile ; preserving any excess sealant within joint of glass and aluminium. 6.Aluminium caps shutting down the wing profile outrightly moreover plastic cap is not used within wings. 7.
Request for a quoteROYAL GLASS TECHNICAL GLAZING SYSTEMS
Turkey
1.Loadbearing lower case profile within base surface of width is 48 mm, aforesaid ; other loadbearing profile; withinupper case is 40 mm. Within existence of these profiles inside; there are two separately functioning channels independent from each other in order to fullfill the duty of carrier. 2.Through vertical height of lower carrier; trio cubicle drip cap case profile is used. 3. Thanks to trio cubicle profile ; the outdoor is invisible and indoor air ingress is prevented directly .Under favour of hair gasket along with within case profile uninterrupted hair cord can be easily implemented .. 4.Thanks to centering channel , at wing profile as moving profile;axial leakage is prevented additionally possibility of any excess sealant within joint of glass and aluminium is preserved. 5.Aluminium caps shutting down wing profile outrightly moreover plastic cap is not used within wings. 6.All pitch joint details (sections of; sub strut and pitch joints I possessing the same design...
Request for a quoteROYAL GLASS TECHNICAL GLAZING SYSTEMS
Turkey
1.Wide loadbearing lower case profile is ; within base of 162 mm. 2.Loadbearing lower case profile' s vertical height is 20 mm. And interior part is designed with dripped cap. 3.Within Asso serie; there is no plastic injection at point of junctions and finishings. 4.Continuous hair cord can be implemented, under favour of hair cord channel along case profile. 5.Wing profile as moving profile; suspension wheel centering in order to prevent channel. being wing profile 6.Wings are pulled by courtesy of aluminium caps used vertically along with height. 7.As optional ; along height of wings, espagnolete sheet providing locking can be applied as latent crank or window cracker. 8.Within Asso serie; first quality heat treated aluminium profiles ,produced 6060, 6063 alloy is used. 9.Road wheel diameter of 25 mm, double carrier bearing is special formulated polyamide injected. 10.Body of the wheel is centered channel, spring loaded and configurable.. Body of the wheel is in plenteous
Request for a quoteROYAL GLASS TECHNICAL GLAZING SYSTEMS
Turkey
1.Carrier lower base profile base surface width is 117 mm. 2.Lower carrier profile vertical height are 9 and 14 mm with two alternatives and Water inclined has at 14 mm height threshold profile. 3.At case and side profile junction there is no plastic injection. Alluminium profiles are linked to each other with screws in order to provide uninterrupted conjuction. 4.Above glass panels; there is no additional panels. Centering is supplied thanks to component that is mounted inside upper case profile . 5.Balanced and without flexure operation is provided by courtesy of carrier channel located at lower rail profile. 6.There is no need any additional component or application under favour of first wing profiles are handler itself. 7.Center channel is existed at wing profile as moving profile in order to prevent axial leakage. Additionally; intersection between glass and aluminium the wing profile is specially designed in order to prevent glass leakage.
Request for a quoteROYAL GLASS TECHNICAL GLAZING SYSTEMS
Turkey
All edges; are framed by special designed aluminium. 8mm tempered glasses or laminated glasses. Number of panels; 1 + 1, 1 +2;1 +3 ,tor 26 mm thickness 1+ 1, 1+2 ; panels tempered or laminated, secured engine drive , and thanks to the gear chain , it has been transported jambs without imposing any burden to the glazing units, within wide angled coupling corded staple characteristic , it provides insulation and wind resistance and operating vertical. Mechanism is stabilized by double- row gear and double- row chain ; the safe bearing capacity tor load ; the maximum panel weight is; (170 kg)x 20 times (Min) BECKER Motors Ltd. (Made in Germany) 153,9 mm X 140 mm (Width X Lenght), inbuilt multipurpose insulated and lock concealed screw. Switch controlled or remote control . Eager tor bonding and fast curing, not including extra solvent; lmplemented on neat surface. Sound lsolation: along horizontal scale, to the interior and exterior side of upper box; 20 mm thickness, 150 DNS
Request for a quoteManufacturer/ Producer
2.OSB HAVAALANI YOLU 4.KM
44110 Malatya - Turkey
JANELA EXÓTICA, LDA
Portugal
A hinged 16 mm Groove system that optimizes labour and saves on the installation time of each window making it possible to fit the sash and frame opening kits in only 5 minutes.
Request for a quoteJANELA EXÓTICA, LDA
Portugal
Possibility of straight or curved beads
Request for a quoteJANELA EXÓTICA, LDA
Portugal
This new fire resistant door system that has a fire resistance classification of EI260, resolves the security requirements in case of fire, allowing for the compartimentalization in fire sectors in the building and the evacuation of the users. Comprising of 80 mm section straight line coplanar profiles, 2.2 mm thick and a 35 mm thermal breaking zone, it offers a 60 minute fire resistance time thanks to the utilisation of retardant insulation materials that do not combust in the profile chambers as well as intumescentant gaskets that dilate and bio-soluble paper in the glass area. With a frame transmission value from 1.4 W/m²K, it reaches unbeatable thermal features and with its large glazing capacity having a free space of 56 mm, it guarantees a maximum accoustic insulation. Possibility of joining with fixed lights, incorporation of opening gearing with anti-panic function, automatic door closers and handles/hinges officially approved in the sectoring of fires.
Request for a quoteJANELA EXÓTICA, LDA
Portugal
Coplanar door entry system with straight 70 mm and thermally broken for commercial premises and buildings. With a frame transmission value from 0.9 W/m²K, it reaches unbeatable thermal features and its great glazing capacity guarantees a máximum accoustic insulation. Possibility of high resistance hinges (face fix or re-inforced in to the channel) capable of supporting up to 220 kgs in weight per sash. Possibility of hidden hinges with máximum dimensions and weight per sash of 2700 mm in height, 1500 mm in width and 120 kgs. and with a máximum sash opening of 100°. It presents solutions of finishing to the floor and compatible meeting styles with our actual systems. It is valid as a configuration for an emergency exit with anti-panic devices according to EN 179 & EN 1125 norms.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.