Germany
Manufacturer/ Producer
Germany
"Kombibar" Combined pressure measurement device Features: Combination of diaphragm seal technology with pressure transmitter and mechanical gauge A wide range of variations can be realized All process connections of LABOM´s diaphragm seal portfolio available Redundant measurement of 2 devices in one process connection Options: Explosion protection for gases Optional with switch function
Request for a quoteGermany
Features Measurement of relative pressure of gases, vapours and liquids Output signal: 4…20 mA, 2-wire technology Stainless steel case, degree of protection IP 65 Easy zero setting by means of a magnet Accuracy ≤ 0.5 % Options: Output signal (invers) 20…4 mA Accuracy ≤ 0.3 % Hygienic design
Request for a quoteGermany
Pressure transmitter PASCAL CVfor general applications, Type series CV3100, CV3101 Modular pressure transmitter with internal or flush-mounted diaphragm Output signal: ● 4…20 mA ● HART® protocol (rev. 6), option ● PROFIBUS PA, option Function modules ● Multifunctional display with 5-segment digital display and bar graph ● Switching module with 2 floating channels, maximum 0.5 A switching current, electrically isolated at all sides, without additional auxiliary power Function module replacement on site without recalibration “plug and measure” Limits of measuring range 0…80 mbar to 0…400 bar Accuracy: ≤ 0.15 % Turndown 5:1 Degree of proctection IP 66, piezoresistive measuring cell directly aerated Options Explosion protection for gases and dust Classification per SIL 2 Inspection certificates; material certificate and calibration certificate as per DIN EN 10204-3.1 Degree of protection IP 69K
Request for a quoteGermany
Universal pressure transmitter Features: Stainless steel case, degree of protection IP 65 Direct ventilated sensor element Measuring ranges: 0…100 mbar to 0…400 bar rel.; 0…1 bar to 0…6 bar abs. Accuracy ≤ 0.2 % Further features Options: Approvals/Certificates: Certificate of measuring equipment for Russian Federation; Material certificate as per EN 10204-3.1; Calibration certificate as per EN 10204-3.1 Degree of protection IP 67
Request for a quoteGermany
Resistance thermometer MiniTherm without thermowell Type series GA2730 Features For the installation in a separate thermowell Measuring insert spring loaded Compact and small design Measuring resistor 1 x Pt100 in 3- wire technology, class A Fast response Circular connector M12 or field housing Options Explosion protection Classification per SIL2 Certificate of measuring equipment for Russian Federation Transmitter can be integrated Process connection union nut G3/8“
Request for a quoteGermany
Gas expansion thermometer NS 100/160, various process connections Features High quality case with bajonet ring NS 100/160, degree of protection IP 66 Nominal ranges -40 °C…700 °C, further nominal ranges from -200 °C...700 °C upon request Case and wetted parts of stainless steel Different connections can be supplied Temperature detecting element 6, 8 and ≥ 10 mm diameter Short immersion lengths of the temperature detecting element may be used Accuracy class 1 as per EN 13190 Micro adjusting pointer for indication correction EAC declaration (upon request) Options Explosion protection (ATEX) for mechanical devices Certificate of measuring equipment for Russian Federation Calibration certificate as per EN 10204 Case with liquid filling Electronical angle-of-rotation sensor, Type series PL1100, see data sheet D6-020 Connection to zone 0 with thermowells (upon request)
Request for a quoteGermany
Bourdon tube pressure gauge NS 63, stainless steel design Features Bourdon tube pressure gauge Nominal range -0.6...0 to -1...24 bar, 0…0.6 to 0…1000 bar High quality case with bajonet ring NS 63 per EN 837-1 S1 Case and measuring element of stainless steel Degree of protection IP 65 Accuracy class 1.6 per EN 837-1 EAC declaration (upon request) Options Explosion protection (ATEX) for mechanical devices Certificate of measuring equipment for Russian Federation Calibration certificate as per EN 10204 Accuracy class 1.0 per EN 837-1 Case with liquid filling Mounting: Front flange for flush mounting, rear flange for surface mounting Connection to Zone 0 Oxygen free of oil and grease EAC declaration (upon request)
Request for a quoteGermany
Resistance thermometer Pt 100 without thermowell - GA2500 Features: Resistance thermometer for additional thermowell Pt 100 connection 3- and 4-wire technology Measuring insert interchangeable Measuring insert 1 x Pt 100 or 2 x Pt 100 Various designs available Options: Explosion protection Classification per SIL2 Approval German Lloyd Transmitter can be integrated Measuring insert for In-process calibration
Request for a quoteGermany
Pressure transmitter PASCAL CV4 threaded connection, type series CV4100 Features Compact case of stainless steel in hygienic design according to recommendations from EHEDG and 3A, degree of protection IP 65/67 Accuracy ≤ 0.15 % High-resolution graphic display with Intuitive operation and backlight Quick access to device data Comprehensive parameterising, simulation and diagnostic functions Nominal range 0.25 bar to 400 bar Turndown up to 20:1 Output signal 4…20 mA with HART® protocol Output functions: linear, invers Table function with up to 32 support points (in preparation) Wetted parts stainless steel Process connection: screw-in thread with internal diaphragm Options Accuracy ≤ 0.1 % Explosion protection for gases and dust (in preparation) Classification per SIL2 (in preparation) Material certificate per EN 10204 Calibration certificate per EN 102044
Request for a quoteGermany
Bourdon tube pressure gauge NS 160, precision instrument, type series BA6300 Features High quality case with bajonet ring NS 160 with rear blow-out device per EN 837-1-S1 Nominal ranges -0.6...0 bar to -1...24 bar, 0…0.6 to 0…600 bar Case and measuring element of stainless steel Accuracy class 0.6 as per EN 837-1 Options Material certificate per EN 10204 Calibration certificate per EN 10204 Case with liquid filling Mounting: Front flange for flush mounting, rear flange for surface mounting
Request for a quoteManufacturer/ Producer
Im Gewerbepark 13
27798 Hude - Germany
Germany
The new strain gage amplifier with IO-Link interface enables digitalization of the measurement technology right from the sensor. Its compact design and high degree of protection allow the instrumentation amplifier to be used practically anywhere in the field. Strain gage sensors typically have an output voltage of a few millivolts. In industrial environments, e.g. in the vicinity of electric motors or frequency converters, interference can affect the measurement result when transmitting analog signals. This is reliably avoided using the new strain gage amplifier with IO-Link interface. The analog link between the sensor and instrumentation amplifier is kept as short as possible, the standardized IO-Link communication is fully digital and interference-free. The amplifier is powered directly via the IO-Link interface – a standardized 5-wire cable with M12 socket. Strain gage sensors can be connected via a 4-pin M8 connector.
Request for a quoteGermany
The T610 is a handheld measuring instrument from the Trotec MultiMeasure family, used for quick non-destructive moisture measurement up to 300 mm. Another advantage of the process, aside from the measuring depth, is its independence from the level of salt content in the material. This creates no dissimilarity to the microwave technique, whether it is an older or a new building being gauged. Since the unit’s screen can show two values, for purposes of results evaluation, a function value can be indicated at the same time as the present measured value, if needed. The T610 moisture meter can be linked to a PC through a USB cable. Due to the MultiMeasure Studio Software, the gauged values of the device can be transported online and in real time to the PC. A few practical benefits: German industrial design in robust, premium two-component construction with IP54 type of protection
Request for a quoteGermany
Overpressure or underpressure - Different pressure and measuring ranges - Various operating languages - Optionally with ProfiNet interface and USB interface - Robust, durable design
Request for a quoteGermany
DIGIFORCE® 9311 is the new standard in efficient quality control. The pioneering force/displacement controller delivers rapid, precise evaluation results for applications that demand both high quality and high productivity. The smart performance features and intelligent hardware make test equipment quicker to set up, easier to use and capable of automatic integration in modern production systems. This unrivalled product specification gives businesses the added security and dependability they need for increasingly complex production processes. The DIGIFORCE® 9311 monitors processes in which precisely defined functional relationships need to be demonstrated between two measured quantities of the process. For instance when recording and monitoring processes such as press-insertion, joining, riveting, stamping or caulking, reliable quality control depends on synchronous and high-speed acquisition of measured values combined with analysis based on versatile evaluation elements.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.