KYNIX SEMICONDUCTOR HONG KONG LIMITED - Leading online semiconductor and electronics component distributor

The AZ10/100LVEL16VS is a differential receiver with variable output swing. The LVEL16VS has functionality and output transition times similar to the EL16, with an input that controls the amplitude of the Q/Q¯ outputs. FEATURES • 250ps Propagation Delay • High Bandwidth Output Transitions • Operating Range of 3.0V to 5.5V • Internal Input Pulldown Resistors • Functionally Equivalent to ON Semiconductor MC10EL16, MC100EL16 & MC100LVEL16 • Variable Output Swing

The Microchip Network Interface Card (NIC) ENC28J60T-I/SS is a 10 Mbps Ethernet controller with an integrated PHY and MAC. It is designed to provide a low-cost, low-power solution for connecting microcontrollers to Ethernet networks. The ENC28J60T-I/SS is available in a 28-pin SSOP package and is compatible with the industry-standard 10 Base-T protocol. It supports full-duplex and half-duplex operation and has a maximum current consumption of 160mA. The ENC28J60T-I/SS is suitable for a wide range of applications, including industrial automation, home automation, building automation, and medical device networking. It is also suitable for use in embedded systems, such as those used in consumer electronics, automotive, and IoT applications.

The Atmel® AT25DF641 is a serial interface Flash memory device designed for use in a wide variety of high-volume consumer based applications in which program code is shadowed from Flash memory into embedded or external RAM for execution. The flexible erase architecture of the AT25DF641A, with its erase granularity as small as 4-Kbytes, makes it ideal for data storage as well, eliminating the need for additional data storage EEPROM devices. Features • Single 2.7V - 3.6V Supply • Serial Peripheral Interface (SPI) Compatible – Supports SPI Modes 0 and 3 – Supports Atmel RapidS Operation – Supports Dual-Input Program and Dual-Output Read • Very High Operating Frequencies – 100MHz for RapidS – 85MHz for SPI – Clock-to-Output (tV) of 5ns Maximum • Flexible, Optimized Erase Architecture for Code + Data Storage Applications – Uniform 4-Kbyte Block Erase – Uniform 32-Kbyte Block Erase – Uniform 64-Kbyte Block Erase – Full Chip Erase • Individual Sector Protection with Global Protect

The 74HCT3G34DC,125 is a 3-element, 1-bit buffer/line driver with non-inverting outputs in 8-VSSOP package. It is part of the 74HCT series of logic ICs and operates with a voltage supply of 4.5 V to 5.5 V. It is suitable for surface mount applications and is available in a Digi-ReelR alternate packaging. Features: • Voltage supply range of 4.5 V to 5.5 V • 3-element, 1-bit buffer/line driver with non-inverting outputs • 8-VSSOP package • Suitable for surface mount applications • Available in a Digi-ReelR alternate packaging • Operating temperature range of -40°C to 125°C Applications: The 74HCT3G34DC,125 is suitable for applications such as data transmission, signal buffering, and signal conditioning. It can be used in automotive, industrial, and consumer electronics.

The LMP8645HVMKE/NOPB from Texas Instruments is an instrumentation amplifier specifically designed for high accuracy data acquisition. It features a wide common mode voltage range of -2V to +76V and CMRR-Common-Mode-Rejection-Ratio of 95 dB, which minimizes noise in applications requiring high common mode rejection such as medical, industrial, and instrumentation systems. It has high gain accuracy over a wide temperature range and excellent gain non-linearity and temperature coefficient. This instrumentation amplifier operates from a 2.7 V to 12 V supply voltage and has a Maximum-Operating-Temperature of +125°C and a Minimum-Operating-Temperature of -40°C. This product is available in the TSOT Package-Case.

The LT1636CMS8#PBF is a high performance, low power, low noise, rail-to-rail output instrumentation amplifier. It features a wide gain range of 1 to 1000, low offset voltage of 0.5mV, and low noise of 0.9nV/√Hz. The LT1636CMS8#PBF is ideal for applications such as medical instrumentation, data acquisition systems, and industrial process control. Features: • Wide Gain Range: 1 to 1000 • Low Offset Voltage: 0.5mV • Low Noise: 0.9nV/√Hz • Rail-to-Rail Output • Low Power: 1.2mA/Amplifier • Wide Supply Range: 2.7V to 36V • High CMRR: 90dB • Low Input Bias Current: 0.5pA • Low Input Offset Current: 0.5pA • High Slew Rate: 220V/µs • Low Input Voltage Noise: 0.9nV/√Hz

The IPS511G IR Integrated Circuits (ICs) Power Distribution Switches, Load Drivers are designed to provide a high side switch with a 1:1 ratio of output to input. The device features a non-inverting input type, a voltage load of 5.5 V ~ 35 V, a TO-220AB (5-LEAD) supplier device package, an operating temperature of -40°C ~ 150°C (TJ), a Rds-On-Typ of 110 mOhm, a general purpose switch type, a TO-220-5 package case, and one output. Features: * Non-inverting input type * Voltage load of 5.5 V ~ 35 V * TO-220AB (5-LEAD) supplier device package * Operating temperature of -40°C ~ 150°C (TJ) * Rds-On-Typ of 110 mOhm * General purpose switch type * TO-220-5 package case * One output Applications: The IPS511G IR Integrated Circuits (ICs) Power Distribution Switches, Load Drivers are suitable for a variety of applications, including automotive, industrial, and consumer electronics. They can be used to control power distribution, switch loads, and drive motors.

The CS4398 is a complete stereo 24 bit/192 kHz digital-to-analog system. This D/A system includes digital deemphasis, half dB step size volume control, ATAPI channel mixing, selectable fast and slow digital interpolation filters followed by an oversampled multi-bit delta-sigma modulator that includes mismatch shaping technology that eliminates distortion due to capacitor mismatch. Following this stage is a multi-element switched capacitor stage and low pass filter with differential analog outputs. The CS4398 also has an proprietary DSD processor that allows for volume control and 50 kHz on-chip filtering without an intermediate decimation stage. It also offers an optional path for direct DSD conversion by directly using the multi-element switched capacitor array. The CS4398 accepts PCM data at sample rates from 32 kHz to 216 kHz, DSD audio data, has selectable digital filters, consumes little power, and delivers excellent sound quality.

The XILINX XC9536XL-10PCG44C is a Complex Programmable Logic Device (CPLD) with 10.0ns access time and a temperature range of 0°C to 70°C (TA). It is a 44-PLCC (16.59x16.59) package and is in system programmable with a minimum of 10K program/erase cycles. Features: • 10.0ns access time • 0°C to 70°C (TA) temperature range • 44-PLCC (16.59x16.59) package • In system programmable with a minimum of 10K program/erase cycles Applications: The XILINX XC9536XL-10PCG44C CPLD is suitable for a wide range of applications, including: • Automotive • Industrial • Medical • Networking • Telecommunications • Consumer electronics • Aerospace and defense