Netherlands
Manufacturer/ Producer
IKEUCHI EUROPE B.V.
Netherlands
Features Pressure loss is minimal to enable high spray impact performance. Long thin slit with tapered nose is suitable for installation in a narrow space such as between support rolls. Drastic energy saving is achieved by switching from compressor-using type. Applications Blow-off drying: Blow-off drying after washing, Edge wiper for steel surface treatment
Request for a quoteIKEUCHI EUROPE B.V.
Netherlands
Features High chemical-resistant rotating cleaning nozzles. Solid stream (ES series) or flat fan-shaped spray pattern (ESV series). Compact and simple design. Rotation is driven solely by the flow of the cleaning fluid. Clean design with little dripping from the nozzle tip even when installed upward. Applications Cleaning by volume of spray flow, not by spray impact Cleaning of tanks and filling machines
Request for a quoteIKEUCHI EUROPE B.V.
Netherlands
Features Low-speed rotating nozzles for tanks/containers cleaning. Rotation of 5–10 rpm at 0.3 MPa (ca. 3 bar). Maximized contact time between cleaning object and spray liquid achieves higher cleaning effect. High heat-resistant. Applications Cleaning of tanks, containers, filling machines, and conveyors
Request for a quoteIKEUCHI EUROPE B.V.
Netherlands
Features Low-pressure type rotating nozzle. Solid stream jet provides high cleaning performance. As the nozzle part is movable, it is easy to insert into and eject from a tank or equipment. Compact design allows for installation in a tank with a small inlet. *1) Spray capacity for each model: RJ3-2-Φ7: 103 L/min (at 0.3 MPa, ca. 3 bar)–169 L/min (at 0.8 MPa, ca. 8 bar) RJ3-2-Φ8: 127 L/min (at 0.3 MPa, ca. 3 bar)–207 L/min (at 0.8 MPa, ca. 8 bar) RJ3-4-Φ6: 146 L/min (at 0.3 MPa, ca. 3 bar)–239 L/min (at 0.8 MPa, ca. 8 bar) *2) Reach distance of RJ3-4-Φ6 is approx. 9 meter in radius. Applications Cleaning of tanks, chests, and containers, cleaning inside the chests (material tanks of papermaking)
Request for a quoteIKEUCHI EUROPE B.V.
Netherlands
Features Compact cleaning nozzles for low- and medium-pressure specifications. Available in threaded joint type or pin connection type. In addition to standard types, we can also provide a special-order spray nozzle to meet customer’s tank specifications and applications. Applications Tank cleaning, vessel cleaning
Request for a quoteIKEUCHI EUROPE B.V.
Netherlands
Features Allows adjustment of spray direction over a range of 50 degrees as desired. [Metal type] Withstands pressure design. Available from 1/8″ to 3/4″ in pipe connection sizes. Use UT-S303 (stainless steel 303) at pressure under 15 MPa (ca. 150 bar), UT-B (brass) under 4 MPa (ca. 40 bar). [Plastic type] Lightweight, high seal performance. Spray direction is adjustable while spraying (up to 0.3 MPa, ca. 3 bar). Use UT-FRPP at pressure under 1 MPa (ca. 10 bar, at room temperature). Cautions for both types: Do not use under conditions where water hammer or sudden change of water pressure occurs. For use with KB and KKBP series nozzles, a different type of UT Ball Joints are required. Inquire with us for details. Applications Accurate nozzle alignment is possible after connected to a pipe. Where large changes in spray direction are required depending on nozzle application such as cleaning and air blowing.
Request for a quoteIKEUCHI EUROPE B.V.
Netherlands
Features Easy installation and removal by just attaching a nozzle to this connector. Quick-detachable design helps to greatly reduce maintenance time. Easy mounting/dismounting with a knurled tab. Made of high chemical and heat resistant plastic (compared to PVC). Nozzle connector thread size is Rc 1/8″ or Rc 1/4″. Note: The upper-left photo is INCO with a wide-angle flat spray nozzle YYP series. Applications Cleaning Etching Stripping For the applications where precise spray alignment and/or periodic maintenance is required Quick-detachable nozzle connectors with thread size Rc1/8 or Rc1/4
Request for a quoteIKEUCHI EUROPE B.V.
Netherlands
Features Cleaning inside pipes and tubes, moving itself by means of spraying solid stream jets in different directions as driving force. High impact jets effectively remove scale and dirt inside pipes. Applications Cleaning: Pipes, drains, water and wastewater pipes, tubes of heat exchangers and cooling machines Others: Removing scale and rust
Request for a quoteIKEUCHI EUROPE B.V.
Netherlands
Features Taking in surrounding liquid, EJX series solution agitation nozzle spouts out 3-4 times more volume than the amount supplied. Simple structure and compact design suitable for multiple-nozzle arrangement. Applications Solution agitation, preventing deposition, uniformizing concentration and pH Cleaning in liquids Submerged etching Plating
Request for a quoteIKEUCHI EUROPE B.V.
Netherlands
Features Self-cleaning nozzle header. Inner brushes for nozzle cleaning are built-in. By rotating inner brushes, nozzle orifices are cleaned thoroughly, and foreign objects inside the pipe are flushed out through the drain. Available in the manual brush-cleaning type (the inner brushes are rotated by turning handwheel) and air-driven automatic type (which allows remote control of spray and cleaning modes). *1) Spray capacity per one nozzle (not per header). Applications [Steelmaking] In Continuous Galvanizing Line (CGL), Electrolytic Galvanizing Line (EGL), Continuous Pickling Line (CPL), and Continuous Annealing Line (CAL)
Request for a quoteManufacturer/ Producer
Merwedeweg 6
3621 LR Breukelen - Netherlands
KAMAT GMBH & CO. KG
Germany
The nozzle consists of two counter-rotating nozzle housings into which the nozzle tubes are inserted with a connection for screw-in round jet nozzles. A special packing sealing system inside the nozzle housings ensures protection during operation and prevents the ingress of contaminants. In front of and behind the nozzle housings are spacers (basket system) to prevent the nozzle tubes from hitting the well wall. In addition, for best cleaning results, the temperature of the medium should be between 3 and 30°C.
Request for a quoteKAMAT GMBH & CO. KG
Germany
Optimum surface cleaning with KAMAT high-pressure rotating nozzles In order to ensure a surface treatment with excellent results and within a reasonable time, we have developed special externally driven rotating nozzles suitable for our high pressure pumps: Depending on the customer's requirements, our nozzles can be driven pneumatically, electrically or hydraulically. With traditional, self-powered rotating nozzles, the water jet hits an angle before it exits the nozzle, causing the nozzle to rotate. Driving the rotating nozzle causes the water jet to lose energy and is therefore much less efficient. Our externally driven rotary nozzles concentrate the hydraulic energy entirely on the machining process. KAMAT rotating nozzles provide coherent jets that can be moved precisely and quickly over large areas. In the case of externally driven rotation, the hydraulic energy is used entirely on the surface being sprayed, giving excellent and efficient results on surfaces.
Request for a quoteTARHAN AUTOMATION AND MACHINE
Turkey
0.7mm 45° & 100° Fogging Angle 70bar (1015psi) 240gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305)
Request for a quoteTARHAN AUTOMATION AND MACHINE
Turkey
0.7mm 45° & 100° Fogging Angle 70bar (1015psi) 240gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305)
Request for a quoteCreate one request and get multiple quotes form verified suppliers.