Germany
Manufacturer/ Producer
Germany
The G-Line XF 910 is the lightest smoothbore hose in the Goodridge range. The hose features a smooth bore, externally convoluted, carbon impregnated, anti-static PTFE liner, wrapped in a super lightweight Aramid fibre braid. In addition to the 711 crimp and 4000 series crimp/draw swage fittings, the G-Line XF 910 hose can be assembled using 811 reusable fittings, without the need for specialist tooling.
Request for a quoteGermany
The G-Line XF 811 is the stainless-steel braided equivalent to the G-Line XF 910. The hose features a smooth bore, externally convoluted, carbon impregnated, anti-static PTFE liner, wrapped in a Stainless Steel braid. In addition to the 711 crimp and 4000 series crimp/draw swage fittings, the G-Line XF 811 hose can be assembled using 811 reusable fittings, without the need for specialist tooling.
Request for a quoteGermany
Goodridge 811 series patented reusable fittings are designed for the G-Line XF-910 and XF-811 hoses. The 811 reusable fittings range can be assembled using basic hand tools.
Request for a quoteGermany
G-Line Ultra 860 & 960 are the most robust hoses in the Goodridge range; used by motorsport teams globally who require the highest level of protection from temperature, high pressure, vacuum resistance and kink resistance. Similar to the Goodridge G-Line XF range, G Line Ultra features a smooth bore, externally convoluted, carbon impregnated, anti-static PTFE liner. In addition, the G-Line Ultra range features a helically wound high tensile 316 stainless steel coil, seated between the external convolutions of the PTFE hose liner. The coil increases burst pressures, vacuum resistance and kink resistance. Double swivel tail fitting options are available to aid with alignment.
Request for a quoteGermany
Goodridge G-Link quick disconnect couplings (otherwise known as dry-breaks) are a lightweight coupling that can be disconnected and reconnected by hand/ lanyard in seconds; without the need to re-bleed the system. Perfect for brake lines, fuel lines, oil lines and pneumatics. There are two types of G-Link available, ‘bayonet’ and ‘pull type'; with a range of seals to suit different applications.
Request for a quoteGermany
The 200 series hose features a reinforced chlorinated Polyethylene (CPE) synthetic rubber liner, wrapped in a double stainless steel external braid for additional resistance to abrasion. Ideal for use outside the cockpit, engine bay and underneath vehicles where abrasive protection is required.
Request for a quoteGermany
Goodridge 236 fittings are reusable fittings designed for use with the 200 & 210 series hose ranges. The triple seal/double O-ring nitrile, cutter design ensures a secure leak free connection, easily assembled using basic hand tools. Our 1136 fittings use a single nipple design and are available in straight, 45° & 90° options for AN-04 only.
Request for a quoteGermany
Manufactured for use with our 200, 210 & 202 series hose ranges, the 936 hose finishers are designed for push fit applications. The internal gear drive clamp ensures a secure leak free connection; easily assembled using basic hand tools.
Request for a quoteGermany
Material / Construction: Textile reinforced rubber with elastomer cover Temperature range:- 40 degrees to 100 degrees
Request for a quoteGermany
The 536 series fittings are designed for use with the 536 and 536B hose ranges. Goodridge developed the ‘sure lock’ barbed tails specifically for use with the 536 hose range to ensure a simple, safe and reliable connection. In addition, the 536 hose can be turned on the barbed fitting tail for alignment in situ.
Request for a quoteManufacturer/ Producer
Lochfeldstraße 30
76437 Rastatt - Germany
Germany
Hose lines that cannot withstand the high pressure for which they are designed can cause serious damage, resulting in high costs - often higher than the price of a test bench. Why take a risk that can be easily avoided? By testing the quality of your products, you opt for safety. The P 160 workshop test bench allows for the efficient and safe final inspection and testing of hose lines. It is easy to operate and quickly become part of your routine procedures. Quality and safety •Fully enclosed test chamber •Also suitable for the static pressure testing of various hydraulic components such as valves, hydraulic cylinders, housings, quick-release couplings, etc. •Safety valve - when the hood is opened, all pressure is automatically released within 1/10 second •Hood with gas springs and transparent Makrolon® safety pane •Environmentally friendly test medium (water-oil emulsion) •Easy and safe to operate •Compressed air filter with condenser
Request for a quoteGermany
Testing has never been easier and quicker. With the P300, you can perform precision tests of hoses of up to 2500 mm in length and with pressures up to 1000 bar. Test up to 120 hoses per hour, making use of 4 parallel test lines and our quick-clamping system. You can choose between automated and manual setup mode. The P300 comes with a number of standard features such as an internal lighting and a portable power aggregate, and caters for individual test logging. •Testing of up to 120 hoses per hour •4 parallel test specimen •Combination of two test chambers (mirror arrangement) •Fast workflow thanks to separately running test chambers (for alternate setup and testing) •Quick-clamping system holding up to 4 hoses for parallel testing with customised settings •Internal lighting system, adjustable machine feet and top-quality internal gear pump •Quick changeover between automated and manual setup mode •Separate portable power aggregate (with 2m connecting cable)
Request for a quoteGermany
Is testing of large industrial hose or long hydraulic hose possible in a safe and practical manner? Our new P 350 test bench unifies our years of experience with your advanced requirements for special hose equipment. The extra-large test chamber gives you the space you need for your challenge. Pallets with hoses as well as large, heavy hose coils can be easily supplied to the chamber by forklift. Hose samples are connected easily with adapter hose and quick connection to pressure ports. The P 350 comes with a number of standard features such as internal lighting and a portable power aggregate, and caters to individual test logging.
Request for a quoteGermany
The P 250 Test Bench with Control C.2 IPC is a new modular test bench that can be adapted to your needs. It offers the possibility to test with Steck-o, Hand or Hydraulic quick cone system. You can also install a Euro Pallet inside. The Chamber also accepts a non-end extension if you prefer to test a hose lengthwise. The controller offers all parameters for a fully automatic test, with visualization of the pressure and may other features but also connectivity to your server or other machine in line with industry 4.0. Quality and safety •Fully enclosed test chamber •Also suitable for static pressure testing of various hydraulic components such as valves, hydraulic cylinders, housings, quickrelease couplings, etc. •Safety switch - when the hood is opened, all pressure is automatically released within 1/10 second •Environmentally friendly test medium (water-oil emulsion) •Easy and safe to operate •Quick changeover between automated and manual setup mode
Request for a quoteCreate one request and get multiple quotes form verified suppliers.