GERMANBELT SYSTEMS GMBH

Structure of germanBelt® fabric conveyor belts Fabric reinforcement: Our fabric conveyor belts are reinforced by 2-5 rot-resistant plies made of synthetic EP or PP fabric. These fabrics possess a good tensile strength/weight ratio, have excellent flexibility and troughability, low elongation, high impact resistance and good chemical resistance. Covers: The carcass of the fabric belts is protected by covers. Cover qualities or grades are characterized by the conveyor belts’ chemical and physical properties. Inclined systems require cleats or fabric conveyor belts with grooved surfaces. Cover thickness depends on the properties of the transported material and on loading conditions. Skim layers: Rubber skim layers in the fabric conveyor belt’s carcass provide excellent adhesion between the plies and efficient distribution of tension. They also absorb impact stress caused by dropping material.

Structure of germanBelt® steel cord conveyor belts Steel cord reinforcement: The standard steel cords have been hot-dip galvanised and have diameters from 2.6 to 12.8 mm. They are manufactured in 7x7 or 7x19 designs (other designs are possible). Their design allows good rubber saturation and distribution. Skim layers: A special chemical process provides excellent rubber/metal adhesion in the steel cord conveyor belt. The design of the steel cords leads to outstanding adhesion that surpasses any standards. Good rubber saturation and high adhesion on each cord provide germanBelt® steel cord conveyor belts with extraordinarily high longevity. Covers: The covers’ abrasion resistance, tensile strength and elongation value depend on the quality of the chosen combination of covers of the steel cord conveyor belt. Lateral reinforcements: The steel cord conveyor belts’ reinforcements consist of lateral steel cords with very high elasticity, or of textile fabric. The lateral reinforcements are worked into the carcass or the cover.

germanBelt® chevron conveyor belts are used to transport material at steep angles of more than 20o. In contrast to smooth fabric belts, chevron conveyor belts are equipped with cleat profiles with heights of 17 mm and 35 mm that enable the belts to meet the specific requirements of steep angle transport. Divers cover qualities and a variety of profile heights provide a wide range of application. Transport of sand, gravel or stones/rocks; Transport of oil-containing or hot material as, for instance, in the recycling industry. germanBelt® chevron conveyor belts offer significant cost benefits and ensure highly reliable transport. In the following, you are provided with an overview of the most frequently requested germanBelt® chevron conveyor belt configurations. If you have special requirements as to profile height or cover quality of chevron conveyor belts we also offer tailor made individual solutions and give you advice on how to deal with your specific transport problem.

for the Specific Requirements of Steep Angle Transport Chevron Conveyor Belt Typ GB 330 W (mm) C (mm) P (mm) L (mm) 400 35 250 120 500 85 250 120 650 160 250 120 Standard designs EP 250/2 3.0mm + 1.5mm EP 400/3 4.0mm + 2.0mm

Chevron Conveyor Belts for the Specific Requirements of Steep Angle Transport W (mm) C (mm) P (mm) L (mm) 650 70 250 120 800 145 250 120 1000 245 Standard designs EP 250/2 3.0mm + 1.5mm EP 400/3 4.0mm + 2.0mm

Chevron Conveyor Belts for the Specific Requirements of Steep Angle Transport W (mm) C (mm) P (mm) L (mm) 1000 95 250 120 1200 195 250 120 Standard designs EP 400/3 4.0mm + 2.0mm EP 500/4 4.0mm + 2.0mm EP 630/4 5.0mm + 2.0mm

Chevron Conveyor Belts for the Specific Requirements of Steep Angle Transport W (mm) C (mm) P (mm) L (mm) 1200 45 250 120 1400 145 250 120 1500 195 250 120 Standard designs EP 400/3 4.0mm + 2.0mm EP 500/4 4.0mm + 2.0mm EP 630/4 5.0mm + 2.0mm

Chevron Conveyor Belts for the Specific Requirements of Steep Angle Transport W (mm) C (mm) P (mm) L (mm) 650 25 330 170 800 100 330 170 1000 200 330 170 Standard designs EP 400/3 4.0mm + 2.0mm EP 500/4 4.0mm + 2.0mm EP 630/4 5.0mm + 2.0mm

Chevron Conveyor Belts for the Specific Requirements of Steep Angle Transport W (mm) C (mm) P (mm) L (mm) 1000 75 330 170 1200 175 330 170 Standard designs EP 400/3 4.0mm + 2.0mm EP 500/4 4.0mm + 2.0mm EP 630/4 5.0mm + 2.0mm

Chevron Conveyor Belts for the Specific Requirements of Steep Angle Transport W (mm) C (mm) P (mm) L (mm) 1200 45 330 170 1400 145 330 170 1500 195 330 170 Standard designs EP 400/3 4.0mm + 2.0mm EP 500/4 4.0mm + 2.0mm EP 630/4 5.0mm + 2.0mm