Germany
Manufacturer/ Producer
Germany
— Gas-cooled DC TIG inverter welding machine — TIG welding with high frequency starting — TIG lift arc welding without HF — MMA welding — MMA pulse welding and pulsed TIG welding up to 2 kHz — Reduced secondary current accessible using torch trigger — Adjustable up-slope/down-slope — Adjustable gas pre-flows/post-flows — Adjustable hot start current and hot start time — Adjustable Arcforce — Antistick function — Energy-saving thanks to high efficiency and standby function — Portable, including shoulder strap — 3.5 m mains supply lead with 16 A shock-proof plug — Mains connection 230 V/16 A — High mains voltage tolerance +15%/-40% and therefore fully generator-compatible — Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage
Request for a quoteGermany
— Degaussing of pipes and metal sheets — Automatic degaussing before welding — Dependable degaussing for better welding results through stable welding process without magnetic deflection, minimisation of finishing work — activgauss (10–250 A) – degaussing during welding: — Avoids moving up of magnetic field during the welding process in case of very long and strongly magnetised components — Portable and robust — Quick connection at the pipe by means of three load cables — Use at -25 °C to +40 °C with mains voltage tolerances of +/- 20% Advantages of degaussing: — No deflection of the arc by residual magnetism in the workpiece — Prevention of lack of fusion due to insufficient sidewall fusion — Minimisation of finishing work — Cost-efficient and high-quality results — Set: Degauss 600 degaussing machine, two 5-metre, 35 mm² load cables, one 20-metre, 35 mm² load cable, RT DGS1 remote control and 5-m connection cable
Request for a quoteGermany
— MIG/MAG pulse welding machine with optimised synergic characteristics for welding steel — Pulsed MIG/MAG welding, MIG/MAG welding, MMA welding and gouging — Significantly less spatter formation and therefore less finishing work thanks to the pulse function — Welding with solid wire and flux cored wire — Drive 4X Steel: Connection socket for electrode holder on the wire feeder as standard — Drive 4X Steel D200: Adjustment of the gas quantity directly on the wire feeder via the gas control valve as standard. — Factory-fit option: Extra gas valve for increased safety — Infinitely adjustable arc dynamics (choke effect) — Adjustable start and end-crater functions — Synergic or manual welding operation
Request for a quoteGermany
— MMA inverter welding machine with degaussing function and reversing switch — MMA /MMA pulse — TIG lift arc / pulse — GMAW (MIG/MAG) welding with Pico drive 4L or Pico drive 200C wire feeder — Arcforce, Hotstart, Antistick — CC / CV characteristics — Suitable for flux cored wire welding — Welding polarity can be reversed by pressing the button polarity reversing switch — Stick electrode/MMA cellulose electrodes: 100% safe for vertical-down welding
Request for a quoteGermany
TIG welding torches, gas- or water-cooled from 150 A (gas-cooled) up to 400 A (water-cooled). — TIG welding torch with a highly flexible hose package — Ergonomic GRIP handle for a secure hold and ergonomic use — Excellent HF reliability — Ready to weld with tungsten electrode, gas nozzle and back cap
Request for a quoteGermany
Gas-cooled PM MIG/MAG-welding-torches, optional function torch with high-quality OLED graphic display. Available as PM 221 up to 250A, PM 301 up to 330A and PM 401 up to 450A — Secure hold thanks to rubber inserts in the grip — The flexible ball joint makes it comfortable to work with, even in difficult spots Highlights function torch: — Automatic LED lighting when welding torch is moved Display and adjustment directly from the workplace- — Welding current and wire feed speed — Voltage correction — Program and JOB selection — Welding process switching — Interferences and error messages — 2-/4-stroke — Choke — Welding processes (standard, pulse, coldArc, rootArc, forceArc) Also supports the Xnet welding management software: — Selection of the welding task according to the welding sequence plan — Component management
Request for a quoteGermany
TIG inverter welding machine with high frequency start. Thanks to the modular structure, the machine can be retrofitted with an additional water block without using any tool. With the two available control variants (Smart 2.0 or Comfort 2.0), a variety of functions are available: — TIG Liftarc welding without HF — MMA pulsing — TIG pulsing (sec/kHz) up to maximum 15 kHz — TIG AC welding — TIG AC pulsing (sec/special) — Non-latched/latched operation — Adjustable up-slope and down-slope time — Adjustable gas pre- and post-flow time — MMA welding — Adjustable hot start current and hot start time — Adjustable Arcforce — Antistick function Available as DC and AC/DC variant with optional torch connection for standard start/stop welding torch or up/down torch.
Request for a quoteGermany
EWM welding consumables for MMA welding Welders can choose between different stick electrodes with different coating materials to work with: — unalloyed steels — low-alloy heat resistant steels — high alloy steels — Copper-based materials — Cladding
Request for a quoteGermany
The Welding 4.0 quality management system ewm Xnet was specifically developed for the welding production and effectively supports all the employees involved in the welding process (welding coordinator, welder, production manager, manager, etc.). The services provided by ewm Xnet include, on the one hand, the monitoring and the documentation of all welding parameters from any number of networked welding machines. On the other hand, it creates and manages the welding documentation (WPQR, WPS, welding certificates) digitally and opens up numerous evaluation options. Additionally, the Xnet welding management system can take over the management of components including all the information associated with it, such as component identification via bar code, material consumption, welding parameters, etc. Thanks to the modular structure, the Xnet welding management system can be used in small, medium and large companies.
Request for a quoteGermany
Maximum operating convenience, long service life and all pulse, standard and innovative welding processes optimised and included in the machine at no extra charge. The members of the Titan XQ family are taking a quantum leap in welding technology. Here, perfect weld seams are already pre-programmed for low- and highalloy steels and aluminium in all material thicknesses and all positions. Thanks to the many options and accessories for the Titan XQ puls series, you can put together your machine in the way that best suits you, your needs and your applications. An exceptionally long duty cycle of 100% at up to 320 A, for example, makes for effective working. Perfect welding becomes sustainable – 24 hours a day, 7 days a week.
Request for a quoteManufacturer/ Producer
Dr. Günter-Henle-Straße 8
56271 Mündersbach - Germany
Bulgaria
We offer MIG-MAG and WIG welding with maximum power of electricity 400 A. Our welding machines are KEMPPI and MILLER. We make welding of steel details, tube constructions with length till 6 meters and weight till 3 tones. We also offer spot welding and robotic welding (Fanuc) at details with length till 3 meters and width till 1.5 meters, by one or by two sides. We weld ferrous metals, stainless steel and aluminum. After welding we make cleaning of welding and painting (powder and wet).
Request for a quoteTurkey
Our Heat Treating Suppliers are certified by Aeronautical and Automotive Industries. Annealing Normalizing Stress Relieving Quenching and Tempering Vacuum Hardening Homogenization Decarburization Nitriding Carburization Case Hardening and more
Request for a quoteCzech Rep.
Straightening press CDN400 with 3100x3000mm table and 1000mm stroke helps us finish our work with great precision.
Request for a quoteCzech Rep.
In our team, certified welders with more than 20 years of experience are working, using precision working plates for weldments up to 4000x6000mm and even more. Our welding shop is equipped with cranes 3,5t / 5t / 20t
Request for a quoteCreate one request and get multiple quotes form verified suppliers.