Germany
Manufacturer/ Producer
Germany
Up to 1 µm: Excellent oil purity even surpasses new oil The ultra-fine particle filtration up to NAS 1 (corresponds to ISO 4406: 13/10/7) provides the following benefits: Receives important components of the oil such as additives Absorbs up to 5 liters of water per element Keeps the oil from aging Works against contamination of the system Extends oil change intervals Ensures less failures (i.e. of servo valves) 3 sizes for different requirements C-1000-filter: Maximum service life C-750-filter: Long service life C-500-filter: Low space requirement
Request for a quoteGermany
Our installation systems with integrated safety control block are suitable for installation in pressurized lines. The integrated safety control block consists of a volume flow reduction unit and a pressure reducing valve. These two components make this system become a cost-effective, very safe, and technically fast operating solution. The mounting to existing systems and machines can be completed in just a few minutes, because there are only 2 connections and mounting material is also part of the system.
Request for a quoteGermany
Our C 1000 ES cleans oil in the main flow with the purity of a partial-flow filter. The partial-flow filtration of technical oils is the most effective and cleanest way of filtration. An ordinary main flow filter cannot remove very fine particles from the oil for kinematic and dynamic reasons, because it is exposed to the high pressure of the system. In order to combine the benefit of the main flow filter – mounting in the main flow – with our excellent filter results, we have developed the installation system C 1000 ES. By use of a control block which consists (amongst others) of a pressure reducing valve and a volume flow control, we filter in the main flow with the results, which are even accepted in space travel since many years. Also available in stainless steel or plastic coating Ultra fine filtration in the main flow up to 1 µm particle size System pressure possible up to 360 bar Constructively simple to integrate, because the control block is installed on the housing
Request for a quoteGermany
The portable, mobile ultra fine filter system M 121 was especially created for small units and those difficult to access. With the help of this robust design oil changes and the risk of spontaneous breakdowns can significantly be reduced. By using our cost-effective 61 filter elements, high oil purity and the elimination of water in oil is guaranteed, despite low investment costs. As the M 121 is portable, and driven by a 230 V- asynchronous motor, it is the optimal tool for flexible service work. 230 V asynchronous motor, contactless Stable gear pump Manometer for flow- and element control 24/7 – unattended operation Variable pressure regulation Transfer-circuit Flow regulation for high viscosity oils Including 1.5 meter flow-/return hose Easy operation: „plug & clean“
Request for a quoteGermany
The M 1201 is identical in construction to our M 1401 except for the power supply. We equip this machine with a 220-volt-asynchronous motor with Steinmetz circuit for high flexibility in places where no 3-phase current is available. This way it can also be operated by a conventional generator in remote locations such as removed brines in quarries. The M 1201 is also very easy to operate, it has selected components made in Germany, and the construction is very stable. We have consciously refrained from any electrical elements due to the usability and the reliability outdoors. 230 V-asynchronous motor, 0.55 kW, robust construction Stable gear pump, 14 liter/minute Manometer for flow- and element control 24/7 – unattended operation Transfer-circuit Flow regulation for high viscosity oils 2.50 m flow-/return hose Also suitable for high viscosity oils
Request for a quoteGermany
The M 1401 is the successor of our ultra fine filter system M1001, which has proven itself over a period of many years. The M 1401 is the all-rounder among the mobile filter systems. Equipped with a robust pump unit, a scalper, and our proven hard chrome-plated C-1000 housing, this treatment system is an all-rounder. No matter which technical oil is to be processed, the M 1401 completes its tasks in the factory just as reliable as, for example, in a quarry. It is extremely easy to operate, has selected components from German production, and was very robustly designed. 400 V-asynchronous motor, 0.55 kW, robust construction Stable gear pump, 14 liter/minute Manometer for flow- and element control 24/7 – unattended operation Transfer-circuit Flow regulation for high viscosity oils 2.50 m flow-/return hose Also suitable for high viscosity oils
Request for a quoteGermany
The S 1401 is a stationary ultra fine filter system for connection to the control cabinet and for constant processing of technical oils. It runs completely independent with a motor-/pump unit. Especially on machines with continuous dirt- and water contribution it guarantees highest oil purity in the whole system. Integration into the control system of the machine enables setting of flexible processing times. These systems can also be manufactured due to individual installation measures on request. 400 V-asynchronous motor, 0.55 kW, robust construction Stable gear pump, 14 liter/minute Manometer for flow- and element control Robust design, very loadable 24/7 – unattended operation Transfer-circuit Flow regulation for high viscosity oils 1.50 m flow-/return hose Also suitable for high viscosity oils
Request for a quoteGermany
Our M 1411 is the ideal machine for processing expensive cutting oils with swarf contamination. It has a pre-filter housing with a metallic screen cylinder and a three-way polypropylene pre-filter. These two pre-filter units work together for retention of coarse impurities such as swarf or larger sand grains. The pre-filter can be used several times. This significantly extends the service life of our filter elements once again, which is already very long. This system is also constructed very solidly, easy to operate, and completes its tasks without supervision. 400 V-asynchronous motor, 0.55 kW, robust construction Stable gear pump, 14 liter/minute Manometer for flow- and element control Robust design, very loadable 24/7 – unattended operation Transfer-circuit Pre-filter selectable from 5 µm – 800 µm Pre-filter can be used several times Also suitable for high viscosity oils 2.50 m flow-/return hose
Request for a quoteGermany
Our mobile ultra fine filter system M 110 is a processing machine for oils with coarse impurities such as swarf and suspended solids. Equipped with a washable pre-filter, coarse impurities are kept away from the main filter which significantly increases its life service once again. It is constructed very robust and is easy to operate. The vacuum display on the pre-filter enables an unattended continuous operation after switching on. An automatic pressure control and shutdown are also standard equipment of the M 110. In the processing of cutting oils for example, it stands for extremely short amortization times. 230 V-alternative 400 V motor, robust and reliable, stable gear pump Manometer for flow- and element control and for vacuum display in the pre-filter Pressure switch for selection setting in unattended operation 24/7 – unattended operation Pumping without filtration (transfer) Flow regulation for high viscosity oils Element lifter for simple and fast element exchange
Request for a quoteGermany
Our mobile ultra fine filter system M 120 is the processing machine for larger oil volumes. Its two hard chrome-plated housings can filter up to 2.100 liter per hour of flow. The robust construction, the easy operation, and the possibility of using it in continuous operation without supervision makes it an ideal tool of a preventive maintenance strategy for large units. Even while filling new oil in larger systems it eliminates condensed water and foreign particles reliably. The high flow guarantees a short amortization time due to cost savings in fresh oil, oil changes, and repairs. 230 V-alternative 400 V motor, robust and reliable, stable gear pump Manometer for flow- and element control Pressure switch for selection setting in unattended operation 24/7 – unattended operation Pumping without filtration Flow regulation for high viscosity oils Element lifter for simple and fast element exchange
Request for a quoteManufacturer/ Producer
Isselbacher Strasse 9
65558 Hirschberg - Germany
Turkey
The oil filter helps clean the contaminants in the oil that may accumulate over time. The importance oil filter is to prevent any abrasive or unwanted particles to reach to compressor thus providing longer life-span. Using coalescent filter, it has the superior filtering capability. PROPERTIES: It has a working pressure of 130 bars, Filtration with coalescent filter, SAE or ODS connection options
Request for a quoteTurkey
The oil filter helps clean the contaminants in the oil that may accumulate over time. The importance oil filter is to prevent any abrasive or unwanted particles to reach to compressor thus providing longer life-span. PROPERTIES: It has a working pressure of 130 bars, SAE or ODS connection options
Request for a quoteTurkey
The oil filter helps clean the contaminants in the oil that may accumulate over time. The importance oil filter is to prevent any abrasive or unwanted particles to reach to compressor thus providing longer life-span. Using coalescent filter, it has the superior filtering capability. PROPERTIES: It has a working pressure of 45 bars, Filtration with coalescent filter
Request for a quoteTurkey
The oil filter helps clean the contaminants in the oil that may accumulate over time. The importance oil filter is to prevent any abrasive or unwanted particles to reach to compressor thus providing longer life-span. PROPERTIES: It has a working pressure of 45 bars, SAE or ODS connection options
Request for a quoteCreate one request and get multiple quotes form verified suppliers.