ATEQ UK LTD - WE TEST YOU PRODUCE

TURNKEY VACUUM MASS SPECTROMETER SYSTEMS The He-490M is a turnkey vacuum mass spectrometer system characterized by ease of maintenance and adaptability to system use. The He-490M uses the most sensitive and accurate method of leak detection: the helium mass spectrometer. The He-490M meets the stringent requirements for robustness, reliability and ease of maintenance that are essential in any industrial environment.. Cold Start-Up, less than 3 minutes Standby Start-Up, less than 1 minute One button automatic operation Hard vacuum leak detection system Modular assembly for custom arrangement PLC controlled Turn-key operation Front panel key lock-out Turbo speed adjustable from 600 to 1500HZ Five year warranty on major components Includes an internal fast clean-up sniffer manifold Allows rapid switching between sniff and vacuum testing modes Auto peak cycle

DUAL GAS LEAK DETECTOR HX-490S Dual Gas is the most advanced sniffing Helium/Hydrogen leak detector designed specifically for industrial environments. The HX-490S Dual Gas utilizes industrial-grade mass spectrometer to achieve the highest sensitivity, fastest response-time, and smallest footprint. With a touch of a button, this dual gas unit can detect either Helium or Hydrogen tracer gases, while using a single built-in dual purpose calibrated gas leak. Fastest response time in the industry (less than 0.5 seconds) Tracer gas background suppression Sensitivity to 5 x 10-8 atm cc/sec Less than 3 minutes total start-up time Fully automatic calibration sequence with built-in dual purpose gas leak User selectable between helium and hydrogen sniffer Front panel key lock-out Sealed membrane keypad Fully interactive system diagnostics with multilingual displays High output (110dB) adjustable audio alarm Flow units (cc/sec, oz/yr, Pa m3/s) Helium or hydrogen sniffing test

The Smart Charge 5 is a fully automatic, custom configurable evacuation and tracer gas backfill system with built-in gross leak test. The system is ideally suited for pre-charging of product with tracer gas, such as Helium, Hydrogen or others prior to the leak test processes. It can also be used with any gas charging application that requires evacuation and subsequent pressurization of a test product. Base unit performs evacuation (25″ Hg), vacuum decay test and tracer gas backfill to 700 psig. Units can be configured to perform evacuation to lower vacuum levels. Recipes to include up to 10 leak locations, with user configurable dwell at each site Serial printer output Data logging over Ethernet Graphical user interface witch color touch screen 2 inputs; 2 outputs available for external use such as for fixture clamping, etc. Password protection prevents unauthorized access Built-in gross leak test eliminates tracer gas saturation

The MS Series of leak detectors represent the world’s largest base of installed leak detectors which are fully automatic, easy to use, and highly accurate, these advanced design leak detectors are ideal for abroad range of applications including clean, oil-free testing. Breakthrough technology combines high test port pressure, a large capacity internal vacuum pump, and ATEQ’s unique mass spectrometer making the MS series leak detectors at least four times faster than conventional portable units available today. Simple one-button start up Fully automatic operation, tuning and calibration with internal NIST traceable temperature compensated calibrator Three modes of operation in a single unit Built-in diagnostics for trouble-free maintenance Dual magnetic sector mass spectrometer with resolving power of 14 Allows testing for the smallest leaks at the highest pressures Ready to test in under three minutes

The MS Series of leak detectors represent the world’s largest base of installed leak detectors which are fully automatic, easy to use, and highly accurate, these advanced design leak detectors are ideal for a broad range of applications including clean, oil-free testing. Quality performance provides maximum productivity along with an ergonomically designed cabinet for operator comfort and viewing. Breakthrough technology combines high test port pressure, large capacity internal vacuum pumps, and ATEQ’s unique mass spectrometer making the MS series leak detectors at least four times faster than conventional portable units available today. Aerospace Components, Air Conditioning and Refrigeration Systems, Automotive Components and Appliances, Batteries, Electron Beam Welders, Electronics, Food Packaging, Hermetically Sealed Devices, Medical Products, Particle Accelerators, Pharmaceuticals, Power Distribution Plants, Semiconductors, Sputtering Equipment, Vacuum Systems, Valves..

Ideal for rework stations on EV vehicle production lines, the EVB 5100 Battery Module Balancing Machine uses the most efficient technologies to equalize voltage differences between modules. Its wide operating range and customization capabilities makes the EVB 5100 compatible with all EV/HEV batteries on the market. Battery balancing (charging, discharging) and temperature monitoring for EV/HEV modules Wide balancing range: In charge 60V-50A/150V-20A in discharge max 3000W Easily configurable target values, voltage and current thresholds Cloud-based platform for data collection, real-time monitoring and reporting Monitoring connectors perform voltage/temperature surveillance of each internal cell Integrated module database for easy reference selection Automated security checks for fully secure operation and shut down in case of anomaly Futureproof: exchangeable power charger modules and connectors Worldwide support through ATEQ subsidiaries and local agents in 37 countries

ATEQ presents its new Pack & Module Charger. Specific electronic module, new interface, specific range of accessories. All has been made to create an accurate and powerful industrial charging solution. 3 ranges available:​ PMC 1000/40​ PMC 1000/80​ PMC 1000/120​ Power of the device can be modulated thanks to the additional unit CU 1000/40 The purpose of the instrument is to provide: Autonomous testing and charging capacity for battery packs and modules The results of the cycles will be available via the OPC UA server Communication with the battery BMS. Load voltage monitoring Load current monitoring Ability to detect a faulty module very quickly Complete traceability with test method and results Intuitive user-friendly interface with Icon driven menu for easy navigation

Without a doubt, the B28 is the smallest high-performance leak tester for battery cells and breathable membranes. One of the main advantages is that our B28 module can quickly test the cell’s insulation. To ensure the best measurement conditions, the B28 has the optional capability to control filling and dumping vacuum around the part to test in a specific enclosure. You can daisy chain up to 50 modules and monitor them with a touch screen panel and our user-friendly interface: B28 control. Leak measurement using air ionization method (I max<1 mA) Compact size External vacuum source Integrated fill and dump valves Ethernet network up to 50 modules (Modbus IP) DIN rail mounting Environment: ROHS standard A high voltage loaded sharp end is applied next to an earth connected base and in between lays the plastic part we test.

On the basis of its well proven concept of production line QC Testers, ATEQ has developed a new leak tester designed for the specific requirements of high volume production of plastic parts. This instrument is used for the detection of localized moulding faults, insufficient membrane thickness, perforations, etc. This instrument has also proven to be effective on testing pouch battery cells. The IONIQ is based on discharge current measurement and is able to detect defects up to of 10µm. Battery pouch cells, plastic bottle caps, plastic packaging, plastic coverings The IONIQ measures the current flowing between a patented charged probe and a ground plate placed under the part to be tested. The IONIQ uses the % of the nominal voltage (which reflects the discharge current), measured on the part as PASS/FAIL level. In a PASS situation (fig 1) : No hole, no weak part, the IONIQ measures a high %. The measured voltage and the nominal voltage are virtually equal.

On the basis of its well proven concept of production line QC Testers, ATEQ has developed a new leak tester designed for the specific requirements of high volume production of plastic parts. This instrument is used for the detection of localized moulding faults, insufficient membrane thickness, perforations, etc. This instrument has also proven to be effective on testing pouch battery cells. The IONIQ is based on discharge current measurement and is able to detect defects up to of 10µm. Battery pouch cells, plastic bottle caps, plastic packaging, plastic coveringsThe IONIQ measures the current flowing between a patented charged probe and a ground plate placed under the part to be tested. The IONIQ uses the % of the nominal voltage (which reflects the discharge current), measured on the part as PASS/FAIL level. In a PASS situation (fig 1) : No hole, no weak part, the IONIQ measures a high %. The measured voltage and the nominal voltage are virtually equal.