AMROC GMBH

The Amroc-Panel is the standard product, from which all other products are derived.

Composition of the cement board Amroc-Panel (A2-s1,d0): approx. 75% wood chips (100% PEFC) approx. 23% special cement approx. 10% water content contained in the wood chips approx. 2% binder

Amroc-Panel - the monolithic cement bonded particle board Depending on the production process, cement bonded particle boards are classified into multi or single layered panels. Especially when exposed to moisture, multi-layered panels have a tendency to delaminate, i.e. the individual layers lose their bond from each other. We are the only manufacturer with the ability to produce a monolithic cement particle panel that is completely resistant to delamination. The Amroc-Panel provides an unmatched level of construction quality for all exterior and interior applications with variable moisture exposure. All our products are manufactured as a single layer panel and are based on the B1 product. Consequently, all technical specifications and characteristics of the A2 panel also apply to all other products or product versions.

AMROC Color-Primed is the product version used for customized finish painting at the construction site. The product AMROC Color-Primed is ideally suited for applying the finished paint coat to the facade at the construction site. The front facing side and edges are primed in RAL 9010 (white) and the rear facing side is finish coated in RAL 7035 (light grey). The finish coat that is applied at the construction site creates vapor diffusion equilibrium between the front and rear facing sides. The factory applied primer does not yet completely seal the front facing side. The finish coat must be a paint-manufacturer-approved paint that is weather proof and alkaline stable. We recommend Amphibolin ELF made by Caparol for this purpose. AMROC Color-Primed is also suitable for: Flooring for wet spaces to be surface treated with ceramic materials, or similar Walls in wet spaces that will be surface treated with ceramic materials.

The protective panel for your facade With AMROC-PROTECT, the thermal insulation of your facade is protected against wind and any kind of precipitation during the construction phase. Therefore, you can take as much time as you want to install your facade - without damaging your thermal insulation or the substructure. The high weathering resistance of the panel means that this protection can be permanently guaranteed. This distinguishes AMROC-PROTECT from all gypsumbased solutions. Due to the small panel thickness of only 8 mm, quick assembly and easy cutting to size are possible. Our formats are based on a grid of 1250 mm, but other formats are also possible. A further advantage is that our panel no longer needs to be dismantled, as it is completely rot-resistant and can remain behind the facade. Despite its high resistance, our product is ecological and free of chemical binders. So you'll be leaving a “green footprint” on your building with all our products!

Amroc-Rustical is fully imbued and only comes in a sanded version. It is used for decorative interior construction, for instance for walls, ceilings and flooring. Amroc-Rustical is available in charcoal grey, amber, neutral or brick red. Amroc-Rustical has the same technical specifications as the Amroc-Panel. For wall and ceiling design applications on new construction, trade shows and exhibits, but also for remediation of existing construction, Amroc-Rustical offers an architecturally appealing, statically superior product with outstanding characteristics. This provides for a broad spectrum of applications. Amroc-Rustical is also an excellent choice as a permanently exposed floor surface. For this application, the panels should be treated with an impact resistant clear-coating. The rear-facing side should be coated in order to facilitate the vapor diffusion equilibrium.

Demand for panels with superior visual appeal for interior and trade show construction has increased steadily in recent years. For these applications, we provide a factory perforated panel in four different standard versions. Products can be selected from 32 x 32 mm patterns with 8 or 10 mm holes and 16 x 16 mm patterns with 6 or 8 mm holes. The product can be shipped in grey simulated concrete (unsanded), or as a ground and imbued panel in neutral, amber, brick red, or charcoal grey colors, and complies with the A2 fire protection code. Upon request, all products are available with a factory applied clear coat. We recommend Capadur wood flooring varnish from Caparol for on-site coating applications.

The Amroc-Panel stands up to the highest expectations when used as drywall, and features superior walking comfort, compressive strength and acoustic insulating characteristics. The "one man" panel in a 1,250 x 625mm size has proven its use. It has a sanded surfaces on both sides, and features a tongue and groove edge profile on all sides. The panel can be used in floating installations, requiring the panels to be glue-bonded at the profiled edges at all times. A felt substrate layer (or similar) is used as a footfall sound insulator and increases walking comfort. Furthermore, a vapor diffusion barrier must be installed under the floorboard. As an additional installation option, the panels can be mounted to floor beams for modernization work on old structures. For this application, the panels are also bonded to each other with glue and are additionally mounted to the sub-structure with screws.

weconomical facade construction permanent weather protection Diverse color design options with commonly used color coatings high airborne sound attenuation

highly resistant to mechanical wear and tear proven impact resistance