Pipes and tubes- steel - Import export

Volume booster for large pneumatic actuators to reduce the positioning times. Simple and universal mounting possible with NAMUR mounting plate. Through adjustable gain, the booster can be adapted to the capacity of the actuator.

Strainer for protecting downstream plant components against contamination. All parts in contact with the media are made from stainless steel, therefore it is also suitable for aggressive media.

Robust stainless steel check valve with high flow capacity for aggressive media and high operating temperatures.

Stainless steel pipes from HJS for individually adapted exhaust systems. Here you get angles, meter pieces to create an individual exhaust system or manifold.

In addition to its high conductivity and machinability, due to its suitability for processes such as soldering, welding, etc., and its easy formability, copper pipes have a wide range of use such as sanitary installations, solar energy systems, and air and oil installations. As a standard, we can do insulation on copper pipes between diameters of Ø15 – Ø80, as well as in different diameters upon request.

GRE and GRP pipes have advantages such as lightness, corrosion resistance, high pressure strength, and they are manufactured as pre-insulated under the brand of Yalcın Boru. GRE (Glass Reinforced Epoxy) Pipe GRE pipe is resistant to the abrasive effects of caustic substances and acid concentrations due to its chemical composition. For this reason, it is used in fire, drinking water and cooling water transmission lines, power plants and industrial waste water systems. GRP (Glass Reinforced Polyester) Pipe GRP pipe is a type of pipe that does not corrode, has insulating feature and can operate in a wide range of pH. Drinking water and clean water transmission lines, piping lines of chemical plants and circulation lines of power plants are among the prominent areas of use of these pipes.

Ductile cast iron pipe is a pipe type preferred in main transmission lines since it has superior properties such as corrosion strength and abrasion resistance as it is made of cast iron, as well as being able to stretch without deformation. In regions where the temperature is low, freezing frequently occurs on the main transmission lines, especially in winter. Such problems can be avoided by using pre-insulated ductile iron pipes.

The joint set comprises the parts below: 1. HDPE cover 2. Heat-shrink tape 3. Polyol and Isocyanate 4. Plug

In case of request, all valves necessary for control of the flow can be manufactured in combination with air release and relief valves, as pre-insulated, and in accordance with the standard TS EN 488

Pre-insulated stainless steel pipes have higher corrosion resistance and oxidation strength compared to other steel pipes. It has a wide range of use such as the food and dairy industry, maritime industry and chemical industry. The preservation of heat in the lines used in these fields is provided by pre-insulated stainless steel pipes.

Galvanised steel pipes, which are resistant to and all kinds of wear such as corrosion etc. compared to black pipes, are manufactured as pre-insulated to prevent heat loss when used in service water installations, fire hydrant lines and boiler lines.

HDPE pipes manufactured in TS EN 12201 – 2 and TS EN 253 standards and between PN 2.5 – PN 25 pressure ranges are one of preinsulated pipe types.

Pre-insulated Glass Fibre Reinforced (Composite) PPR Pipes

The maximum temperature strength of standard type pre-insulated pipes is 140 °C. For this reason, rock wool reinforced (industrial type) pre-insulated seamless steel pipes must be used in lines that are required to operate at higher temperatures such as hot water, hot oil and steam lines.

All of our products are customized by customer's drawing. Please feel free to send us your inquiry.

Fabrication Details Thickness : 0.60 mm - 16.00 mm Dimension : 10X10 - 400X400 mm 300x500mm Length : 4 - 15 meter Standards : TS : 416 (TS EN 10217-1), 6476, 6475, 5317, EN 10305-5, 5317, EN 10219-2 DIN : 2394 - 2395 BS : BS EN 39 :2001, 6323, 6363, EN10219-2, EN 10305 ASTM : A500, A513 Areas of Application : Civil Construction Works Works Mechanical Steel Construction Bridges Steel Structures

Production Details Thickness : 0,60 mm - 14 mm Diameter : Ø13 mm – Ø323 mm Length : 4 - 15 metre Standart : TS : 416 (TS EN 10217-1), 6476, 6475, 5317, EN 10305-5, 5317, EN 10219-2 DIN : 2394 - 2395 BS EN 39 :2001, 6323, 6363, EN10219-2, EN 10305 A500, A513 Usage Areas Civil Construction Works Mechanical Industry Steel Construction

HASS produce and supply Steel or Carbon pipes, both seamless and welded, for different purposes: resistance to low or high temperatures, medium or high pressures, for industrial plant appliances, and also suitable for corrosive environments. Our Pipes fulfill the ASME, EN and PED conformity requirements. Hide Text We effect further tests on our products cooperating with certified laboratories and external licensed companies in order to grant the highest level of conformity to the technical specifications required by our customers.

Spiral Welded Pipelines Related Values within the scope of the standard manufacturing program; Spiral welded steel pipe manufacturing capacity; Sheet thickness from 4 mm to 20 mm Spiral Pipe Diameter 200 mm up to 1727 mm, has a production capacity.

Sheet deep well pipes are made of St 37 material in accordance with DIN 1700 norms. Sheet drill pipes are assembled by welding to each other. It is resistant to underground reactions (collapses). Although the pipe weights cause an axial stress during the well lowering, both the pipe and the welding structure are strong enough to meet these loads. HASS Sheet Drilling Pipes are made of material conforming to TSE standards with wall thicknesses of 4 mm - 5 mm - 6 mm and are TSEK certified. Hass bridge type filter pipes are used to take precautions against silty in silty lands. Hass manufactures fittings such as reduction and pump flanges for Hass Sheet Drilling Pipes.

HASSPIPE produces a high quality range of PVC-U well casings and screens strictly in accordance with the Standard TS 11794 and ISO standarts, class I, II and III. The standard TS 11794 and ISO applies as well for raw materials and workmanship of pipes used in the manufacture of the casing and screen. There are three basic ranges - a standard range for shallow, medium well depth and a heavy duty, thick walled range for greater well depths. The casing and screens are made from 100% virgin unplasticized poly vinyl chloride compound and are coloured grey. They are supplied with a male pipe thread at the spigot end and a female pipe thread at the socket end. No re-worked material is used. The pipe is produced under ISO 9001:9002 Quality Management System. Screens can be supplied with either a plain or filtered surface. Slots are arranged vertically to improve the mechanical strenght of the screens and are designed to give open areas ranging