Original replacements - Import export

Installation axle: front axle Commodity line: brake pads Height, mm: 91 Length, mm: 211 Packing size, l: 2.7 Weight, kg: 2.86 Width, mm: 140

The Yam replaces in an original way the potato or the sweet potato. It is an exotic vegetable that contains vitamins and minerals without forgetting the antioxidants that it possesses are necessary for the balance of the organism. Characteristics of the Yam : Antioxidant power Regulates lipid levels Promotes intestinal and cardiovascular transit Origin, size, humidity, packing, quantity, price according to discussion with the buyer INCOTERMS: AIR OR SEA

With over 30 years of experience Mikropor manufactures the best performing replacement elements in the industry. Mikropor offers four layers of Superior Protection-from 1 micron to 0.01 micron. Durable element construction and an efficient drain layer ensure continued performance with optimal element change periods.Additionally, High efficiency Micro-Glass nanofiber media (80 times finer than Cellulose Fiber) delivers higher targeted efficiencies, longer service life, wide chemical and synthetic lubricant compatibility even at extreme working temperatures.Mikropor assures that the replacement elements perform equal to or better than the original elements. Replacement elements have been designed and tested in ourstate-of-the-art test laboratories.

The aluminum lags are produced precisely for all machine types. Optimized processing techniques tailored to the material ensure that the pins are securely seated. Thanks to modern CNC technology, the needle arrangement and angle precisely meet the requirements of the application. For a high-quality replacement of the original equipment at an optimal price-performance ratio, we are looking forward to your inquiry! A questionnaire is available below, alternatively, send us a sketch. The specification of machine type and desired needle density often suffice.

The extraction pump is designed to remove water or other liquid from separator tank under vacuum condition. The FPB series extraction pump offers capacity from 23m3/h to 120m3/h with head 15meter or 20 meters. It can totally replaceable with original Nash extraction pump. Available in a combination of cast iron with a SS304 impeller and side plate, SS304 and SS316L construction. It is available in the following options: Bare shaft pumps or complete sets with base plates, motors and drives Spare parts Pump together with front separator tank

Direct-Sensing Replacement Electronically Controlled Viscous Fan Clutch VMaster® DSR (Direct-Sensing Replacement) Viscous Fan Clutches are drop-in replacements for a range of Volvo and Mack heavy-duty linehaul and vocational trucks. These viscous fan clutches give Volvo and Mack fleet managers, vehicle owners and operators in the United States, Canada and Mexico new repair options. VMaster DSR Viscous Fan Clutches provide efficient cooling and respond quickly to engine cooling needs. VMaster DSR fan clutchesare plug-and-play replacements for original equipment fan clutches. Three Sizes for Fully Modulating Performance There are three different fan clutch sizes (diameter and overall length). The larger size provides higher maximum torque capacity, along with increased thermal capacity (heat rejection). This allows fully modulating performance over a wider range of slip conditions and fan speeds. Optimized for Specific Applications Maximum torque for a given fan clutch size is impacted by a combination of fluid viscosity specification and total fluid volume in the working area. Other minor physical design differences also affect performance. Therefore, multiple part numbers are offered for the same size fan clutch. These products are specifically tailored for particular applications. Other aftermarket products might compromise performance, cause fan clutch damage as well as engine over- or undercooling. Warranty VMaster DSR Fan Clutches are covered by Horton’s standard one-year/100,000-mile aftermarket product warranty policy. Links

Product Features: • Designed for drop in replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Material used and design specs. were kept as close as possible to the original part to preserve the stock "tone".

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Designed for drop in replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Material used and design specs. were kept as close as possible to the original part to preserve the stock "tone". • Output transformers marked UPGRADE allow for more versatility by added secondary connections that did not exist on the original units.

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Reinforced plastic pegs with a cog end for releasing retention pegs, compatible with the Peg-in, Peg-out Boards You may include engravings for up to 3 letters or digits. Please note that the Flat End Access Peg will work in the same way as the Original and Standard Access Pegs. Replacement pegs are available on next day delivery if ordered before 12 noon excluding Saturday delivery.

These elastic straps with Velcro were specially developed for the FENTO ORIGINAL. You can easily replace your elastic straps once they become worn. This makes the FENTO ORIGINAL much more sustainable. They are strong, wide elastic straps that are tied around the calf and therefore do not pinch behind the knee. The elastics of the FENTO ORIGINAL are also applicable to its former model: the FENTO 200.

Smart Targets RSAKZ6 Smart Targets RSALU22 RSAKZ6: carrier plate for 60 x 60 mm target reflector Range from 10 m to 120 m Temperature and UV-resistant Can be mounted even on difficult surfaces The RSALU22 markers were specially developed for long distance measurements Range 400 m - 500 m The shape of the crosshairs enables exact bearings to be taken from long distances To secure the survey point for a longer period, markings were applied to the carrier plates so that any damaged reflective target can easily be replaced and the original measuring point can be restored quickly, easily and cheaply. Please note: Survey markers with reflective targets are exclusively recommended for carrying out distance measurements using a tachymeter or total station. Survey markers with crosshairs, and without reflective targets, are available for the use of levelling instruments, theodolites and construction lasers.

Smart Targets RS30 & RS31, self-adhesive Smart Targets RS40 & RS41, self-adhesive For quick positioning using the tachymeter and all common measuring instruments The surveyor’s measuring stick can be attached for measuring subsidence For bridge and tunnel construction For measuring and monitoring façades For industrial construction and hall construction For production lines For ensuring heights and axes are securely marked Temperature and UV-resistant Crosshairs are imprinted on the backing plate under the exact centre of the reflective target to ensure the survey point is durably marked. If the reflective target is damaged at any point, it can easily be replaced and the original survey point can be restored quickly, easily and cheaply. Can be mounted even on difficult surfaces For ensuring heights and axes are securely marked For industrial construction and hall construction For production lines The surveyor’s measuring stick can be attached for measuring subsidence Tempera