Mechanical transmission systems and components - Import export

GAT torsion motors are supplied as individual components or as complete torsion system consisting of torsion motor unit, application-specific control electronic s and hydraulic supply. Comprehensive consultation services from concept planning phase to commissioning complement our portfolio. GAT torsion motors consisting of a basic motor and a GAT rotary union are designed for quasi-static, pulsating and dynamic loads. Speed and torque as testing parameters are controlled independently. The torsion test rig with mechanical torsion application allows the energy-efficient testing of components at relatively low investment costs. Using a hydrostatic torsion motor in the test rig creates realistic and consistent testing conditions leading to test results very close to real-life conditions.

Rotoguide: Micro-jet technology with air bearings from ROTOGUIDE stands for ultimate accuracy, load-bearing capacity and robustness. Shafts and bearing parts are machined to ultra-high precision for a positioning accuracy within µm range. ROTOGUIDE units are especially suitable for highly accurate linear and rotational motion under ultra-high vacuum and for all processes with ultimate demands in terms of cleanliness and accuracy

The ROTOKOMBI system allows all rotary union and slip ring types to be combined. The result is a complete rotary transmission system from a single source, with perfectly matched interfaces. ROTOKOMBI systems ensure that an optimally adapted sealing system is available for any medium. For any type of electrical transmission a corresponding system is selected to ensure adequate reliability. Thanks to the modular design, individual components can be replaced, retrofitted or upgraded as necessary. All components are selected and combined to meet your specific demands, without limitations to the number of electrical poles, media or size. Special solutions such as ATEX/IECEx or certifications according to UL/CSA regulations are also available on request.

GAT is a manufacturer and supplier of highly advanced Slip Rings and Rotary Unions. Further to an extensive range of standard products, we also provide individual solutions as your competent partner. Our Slip Rings are based on a modular system and are available with contacting and contactless transmission technology. Combined units comprising Rotary Unions are also available and can be realized as compact units. Compliance with specific directives or protection classes as well as certifications in accordance with UL/CSA can be provided on request.

GAT is a manufacturer and supplier of highly advanced Rotary Unions and Slip Rings. Further to an extensive range of standard products, we also provide individual solutions as your competent partner. We offer single-and multiple-channel Rotary Unions. Different media can be transferred at the same time. Combined units comprising Slip Rings are also available and can be realized as compact units. Our Rotary Unions are based on sealing technologies that have proven their worth for decades. We carefully select the optimal solution to meet your individual requirements.

Rotospray: The air bearing rotary atomizers have been specifically designed for the paint atomization in automated paint streets. The sprayer’s micro-jets ensure finest and consistent spraying at speeds up to 70,000 rpm. Thanks to its high-performance turbine that has been aerodynamically optimized for low air consumption, ROTOSPRAY achieves an enormous performance boost. The air bearing rotary atomizer can handle high loads, making the ROTOSPRAY system especially suitable for use in robotized applications. To cater for individual requirements, the rotary atomizer is available with specific connection layouts and housing variants.

ZWP is one of the leading independent manufacturer in Germany for gears, pinions and rim gears. We supply already well-known manufacturers for gear boxes. We are looking forward getting intouch with you to have a conversation about possibilities for your supply. Sectors of our (international) customers are: Mining, Oil, Offshore, rail and ship transmissions, industrial transmissions, and many more fields of applications. Overview about the capabilities for production: Gears internal and external toothed hardened and grinded Module 2 – 50 mm Diameter 100 – 2,000 mm Internal toothed rings / ring gears hardened and grinded Module up to 20 mm - more on request Diameter 100 to 1,800mm Pinions and shafts internal and external toothed hardened and grinded Module 1 – 50 mm Diameter 50 – 500 mm Length up to 1,500 mm Hardening and balancing inhouse possible. Cooperation with companies for special manufacturing of gears and pinions etc We speak English.

We manufacture gears, gear rings and toothed shafts for various applications in industry with a focus on mechanical engineering and heavy machinery. Our customers come from a wide range of industries: railway, wind power, marine, industrial gearboxes, oil and gas extraction, crane construction or construction machinery as well as special machines. We also supply the retrofit industry and manufacture the parts in small series or individual production. Depending on the dimension a quality of 4 can often be achieved. We examine the possibilities without obligation and without charge. Our customers include renowned and well-known companies. References to your industry on request. We manufacture according to customer drawings and have our own hardening plant. This saves time and costs during production. Cooperation exists for gas nitration and single-tooth induction hardening with experts in their field. ZWP supports you in the overhaul of plants and machines (Retrofit).

We manufacture gears, gear rings and toothed shafts for various applications in industry with a focus on mechanical engineering and heavy machinery. Our customers come from a wide range of industries: railway, wind power, marine, industrial gearboxes, oil and gas extraction, crane construction or construction machinery as well as special machines. We also supply the retrofit industry and manufacture the parts in small series or individual production. Depending on the dimension a quality of 4 can often be achieved. We examine the possibilities without obligation and without charge. Our customers include renowned and well-known companies. References to your industry on request. We manufacture according to customer drawings and have our own hardening plant. This saves time and costs during production. Cooperation exists for gas nitration and single-tooth induction hardening with experts in their field. ZWP supports you in the overhaul of plants and machines (Retrofit).

The right drive solution for every challenge: Experience our new modular worm gear, which offers a variety of mounting options and can therefore be adapted to all your needs. With the preconfigured basic components based on our many years of experience, you can implement your drive task particulary quickly. Should your application make special demands on the drive unit, we naturally offer you competent advice and will be happy to assist you in configuring your drive unit Basic version: — Aluminium casting housing — Hollow shaft Ø15 — Ratios: 7; 10; 20; 24; 30; 50; 55 — Permissible torques: 11-13 Nm Customising - Optional equipment: — Plug shaft on both sides Ø10x30mm gen. 5x20 — One-sided plug shaft Ø10x30mm gen. 4x20 — Big flange Ø100/Ø80/Ø60mm — Complete drive units as three-phase, direct current or 24VDC permanent magnet motors

Energy and sustainability are terms that are shaping this decade and will take on an ever increasing role in the production systems of the future. With ENEX gear units and gearmotors, we provide drive components that can meet future requirements in terms of efficiency and performance. The newly engineered ENEX-LINE represents sustainability, long service life, modularity, high efficiencies and therefore combines the most important features into a compact gear unit which, despite the space-saving design, has an enormous technical performance. Key facts: — Nominal torque: 25Nm — Available ratios: i = 15, i = 24, i = 49 — Efficiency up to 77% — Low noise emissions — Input hollow shaft IEC standard Our sales team will be happy to advise you on questions or configurations - get in contact!

Single-stage gear with ingoing and outgoing shaft Gear Type: SN17B Mounting: Gear Foot Ausgangswelle: solid shaft Additional Data: — Ball bearings for ingoing and outgoing shaft — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear with ingoing and outgoing shaft Gear Type: SN17A Mounting: Gear Foot Ausgangswelle: solid shaft Additional Data: — Ball bearings for ingoing and outgoing shaft — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Timer controlled condensate drain TD420M is designed for reliable removal of condensate or other liquid from high pressure compressed air system. Discharge intervals can be set with two adjustment knobs. TD420M drain is available with a kit for easy installation which enable us to mount it in many different positions. Timer controlled condensate drain TD420M can be used in variety of applications. For applications not listed please contact us or your local dealer.

MCD is designed for the discharging of condensate or any other non aggressive fluid from compressed air system. In order to prevent condensate from re-entering in the airstream we recommend controlling the condensate level in filter bowl, which requires an automatic drain trap. MCD is easy to install on the filter housing. MCD can be used in variety of applications.

AOK20 SS is designed for fully automatic discharging of condensate or any other non aggressive fluid from compressed air system. For any other technical gas please contact us or your local distributor. The unit can be installed as external drain on any application specified below. Condensate accumulates in the stainless steel reservoir and when the level is high enough the condensate is discharged from the system without any air loss. A direct acting valve is operated by a precise level controlled floater which assures reliable and efficient operation. Thanks to its robust stainless steel housing AOK20 SS is suitable for heavy duty applications. On the front, the AOK20 SS, is also equipped with a separate manual drain for venting.

AOK20 has been developed for fully automatic discharging of condensate or any other non-aggressive fluid from compressed air system. The unit can be installed as external drain on any application specified. Condensate accumulates in the aluminium reservoir and when the level is high enough condensate is discharged from the system without any air losses. Direct acting valve is operated by precise level controlled floater which assures reliable and efficient operation. Thanks to robust aluminium housing AOK20 is suitable for heavy duty applications. AOK20 is also equipped with separate manual drain for venting. AOK20 can be used in variety of applications. For applications not listed please contact us or your local distributor.

AOK16B is designed for fully automatic discharging of condensate or any other non aggressive fluid from compressed air system. For any other technical gas please contact us or your local distributor. AOK16B is easy to install inside to the filter housing. AOK16B can be used in a variety of applications. For applications not listed please contact us or your local distributor.

iwis not only manufactures sprockets and plate wheels according to ISO 606 but also customized versions built in accordance with your specifications, drawings or samples. Sprockets Our standard range of sprockets includes sprockets according to ISO 606 from size 05B-1 to 32B-3. Sprockets with taper-lock bushes Taperlock-bushes for fixing hubs precisely and axially centered on a shaft. Plate wheels Standard plate wheels for the complete iwis product program: sizes 05B-1 to 32B-3. Drive sprockets and idler wheels For the FLEXON Flat Top Chain program. Our drive components program consists of torque limiters, Couplings, Tensioners, Chain tools and etc.

The new FLEXON SafeTopChain was designed with a completely closed upper surface, minimising the risk of crushing in curves or deflections and offering maximum stability for products and workpiece carrier systems. The special surface also enables even the smallest parts to be transported risk-free. Highlights: • Requires the same guides as the normal plastic multiflex chains from the 1700 Series • By using turning disks with a minimum radius of 123.5mm, dynamic friction is replaced by rolling friction; this allows longer conveyors with more curves, as well as vertical/spiral conveyor systems to overcome gradients and providing buffering. • Improved chain geometry enables the use of wider sprockets, thus reducing wear through lower surface pressure when teeth engage.

MEGAlife maintenance-free roller and conveyor chains can be used in all areas where relubrication is difficult or impossible. These include dry environments and applications where maintenance access is difficult. MEGAlife chains have nickel-plated parts and are therefore corrosion resistant and have an operating temperature range of -40°C to +160°C. Depending on the application, the maintenance-free chains are supplied either dry or with additional special lubrication.

Gripchains with wear-resistant and corrosion-resistant clamping elements are used for gripping, pulling and transporting thin-walled materials with large surface areas. For example, in the packaging industry, the food industry and the electrical industry as well as in the production of circuit boards or in the metal processing. Key features - iwis high performance chain with excellent wear resistance - Marginal initial elongation due to optimal pre-stretching - High rigidity enables applications also in long machines - Basic chain chemical nickel plated - Flawless operating parallel as well as synchronously running chains due to practically identical chain lengths - All chains are provided with reliable, high quality initial lubrication, approved for use in the food industry - Differing levels of spring force allow an extremely wide range of materials to be gripped gently - Complete chain solution is ready-to-install -

You can rely on the cast steel chain C600 to deal with the toughest traction applications and move the heaviest loads. The chain’s simple yet robust cast steel design makes it an economical and highly resilient partner for the most rugged conditions and over long distances. Highlights • Breaking loads increased about 25% by using cast steel rather than cast iron chains • Alternative galvanized, zinc plated version for corrosion protection • Threaded pins in connecting link for easy closing and unclosing of chain • Both versions also available in plastic

iwis Magnetic radial corner bends Having optimized magnet fluxes around the curve layout, the new generation of FLEXON Maxxtop Magnetic corner tracks from iwis virtually eliminates pulsation and can help reduce tensile forces in our curves by up to 60 %. FLEXON Highlights - Up to 60 % less tensile force than previous magnetic corner tracks - Reduced power consumption - Guaranteed energy saving - Possibility of longer conveyors reducing cost - Reduced chain wear - Reduced pulsation increases product stability - Quieter operation improves environmental conditions for employees - Excellent friction co-efficient properties reduces chain wear - Excellent material quality offers longer service life - FLEXON Maxxtop Magnetic corner tracks are available in all standard sizes - FLEXON Maxxtop Magnetic corner tracks can be manufactured to drawings

The FLEXON range of Snap On Plate Top chains are two piece assemblies of base roller chain, in steel or stainless steel, onto which a plastic plate is mounted. The combination of the two elements creates a chain with high breaking load provided by the ELITE base chain plus the benefit of a very flat top surface.

Stainless steel chains according to ISO 606 (DIN 8187) , chain types 06B-1 to 16B-2

Precision Transmission Chains from iwis:Roller chains / Transmission chains

Highlights • iwis high precision roller chains: long-lasting, reliable, excellent wear resistance • Special lubrication for can manufacturing: non-drip, high temperature range, approved for use in the food industry • Protection heads: high-temperature and high-performance material. Standard type available, other geometries and materials on request. • Length of transport pins can be adapted to customer specifications • Predefined fracturing points in the pins prevent damage within the lines in case of collision (POChain-P/-S) • Transport pins: easily changed on-site without damaging the chain or removing it from the machine (POChain-P/-S)

The agricultural machinery range from iwis agrisystems includes not only feeder and elevator chains for a wide variety of applications, it also encompasses the associated attachments for all the various chain types. iwis agrisystems also supplies accessories such as sprockets, V-belt pulleys and leaf chains, plus complete application kits for agricultural machinery production.