Coils and solenoids - Import export

The CSN® AirCoil is a special design based on the physical construction of a Rogowski Coil. Due to the ironfree design the coil does not have any saturation which allows to use only one CSN® AirCoil Module for both metering and protection arrays. Additionally the CSN® Aircoil shows linear transmission behaviour over a wide frequency range. A current range of hundred amperes up to several hundreds kiloamperes is easy to realize. CSN® AirCoil Modules are combinable and hence the output voltage level is adjustable to customer request. The very compact design with an excellent longterm stability are additional benefits for special applications. Further information about our CSN® AirCoil

Deep draw housings, rolled and formed housings. Multi stage drawing tools with auto transfer in-line tooling depending on design and production volume. Thick base with drawn sides. Zinc plate to EN ISO 2081, ASTM B633 standards and other specific to customer requirements, 72,96 & 720 hours salt spray tests.

Our coil systems are specially designed to generate very large magnetic fields in 1 to 3 dimensions. Every system essentially consists of 2 units: The coil system and the current control system to set the coil currents. The systems can be used for calibration, to compensate external fields, to generate specific magnetic fields, magnetic gradients etc. Our specification scope ranges from: - Frequency ranges: DC to 4 MHz, - Field ranges: from a few microtesla to 200 millitesla - Homogenity ranges: 1%, also over large volumes with small coil sizes - Field stabilities up to a few ppm FS - Size range from a few cm to more than 200 m - Actively compensated for environmental changes or uncompensated (optional) - Generating both magnetic fields and magnetic gradients with or without compensation - Magnetic far field drop off: r-3 to r-11

In coil manufacturing, the production of miniature air coils or micro coils is one of KUK's specialities. According to your specific requirements, we process ultra-fine wires from a diameter of 0.010 mm, which are suitable for a wide range of innovative applications. Thanks to integrated plant and tool construction, KUK Group has the capabilities to process ultra-fine wire from 10 µm and to produce micro coils with diameters from 0.3 mm. For miniature coils with magnetic cores, cores made of a wide variety of materials are possible, including mu-metal, ferrite or amorphous materials. Custom coil solutions can be developed with guide configurations for manual assembly or surface mount SMD coils for delivery in tape and reel, allowing automated reflow processes for PCBA. Our micro coils can be wound with copper, silver, gold or other wire alloys. Various coatings, overmoulding, packaging and test options are available.

For the manufacture of your signs, Domino Sign stocks coils of black prepainted aluminum ranging from 25mm to 200mm in thickness. It is possible to order reels of flat bands without minimum purchase by mixing the dimensions. Black prepainted aluminum Thickness 11/10 Exterior black RAL 9005 Raw anodized interior 165m spools

For the manufacture of your signs, Domino Sign stocks white prepainted aluminum coils ranging from 25mm to 200mm in thickness. It is possible to order reels of flat bands without minimum purchase by mixing the dimensions. White prepainted aluminum 10/10 thickness 165m spools

For the manufacture of your signs, Domino Sign stocks mirror or brushed stainless steel coils ranging from 25mm to 200mm in thickness. It is possible to order reels of flat bands without minimum purchase by mixing the dimensions . Stainless steel Grade EN430 with PVC protective film Stainless steel mirror Brushed stainless steel 78m spool

For the manufacture of your signs, Domino Sign stocks coils of raw aluminum ranging from 25mm to 200mm in thickness. It is possible to order reels of flat bands without minimum purchase by mixing the dimensions. Raw aluminum 12/10 165m spools

Unlike air coils, bobbin coils, as the name already suggests, have a ferromagnetic body or coil former made of different material. The advantage of solenoid bobbin coils: higher inductances can be generated. Whether complicated to manufacture or adapted to special requirements - thanks to in-house winding lines, KUK produces the right bobbin coil for you. The bobbin coils are partly manufactured on standard coil formers. However, we mainly wind onto customer-specific coil formers. We wind bobbin coils from enamelled copper wire or alternative conductor material and thus achieve optimum results in customer-specific applications. We will be happy to advise you on the optimum core material for your solenoid bobbin coil. You can also benefit from our many years of cooperation with specialised suppliers. -Different winding methods -With pin mounting -Connection of litz wires, plugs, etc. -Twisted wire ends

KUK manufactures air coils for a wide variety of applications, e.g. RFID antennas, control coils or transponder coils. To produce self-supporting coils, self-bonding wire is also used, which is superficially bonded (glued) together during or after winding. Air coils are usually made of enamelled copper wire or high-frequency litz wire. So-called self-bonding wire is used to manufacture self-supporting air coils. It has an outer layer whose melting point is lower than the melting point of the insulation. After winding the air core coil, the turns of the coil are "baked" (glued) together by heating, usually by increased current flow. Thanks to our in-house plant engineering, we can optimally align our production lines to your needs, even for air core coils. - Ultra-fine wires starting at 0.020 mm - Single-layer flat coils in cylindrical or rectangular shape - single, bifilar or trifilar winding - Winding with HF litz wires

different parts for traction motors and generators

SEMZ makes coils, stators, armatures, comuttator, brush holders for traction motors.

AVS ROMER Item.Nr. : 616832 Country of origin: Germany HS Code: 84812090 Weight: 0.948 kg

Avs Romer Order Number : 606041 Without manual override for DC not for L-coils, Country of origin: Germany, Customs tariff number: 84812090

The D-frame solenoid LCL is characterized by a compact design, low power consumption and short switching times. A long service life is promoted by the precision steel tube housing and maintenance-free armature bearings. The frame solenoid can be installed in any position, with the force preferably being applied in the axial direction only. It is fastened via threaded holes on the side or on the face. As standard, the frame linear solenoid has a chemically nickel-plated armature and a plastic-molded solenoid coil and has protection class IP 40. Versions with bellows achieve protection class IP54. Other voltages are possible on request.

The D-frame solenoid LCL is characterized by a compact design, low power consumption and short switching times. A long service life is promoted by the precision steel tube housing and maintenance-free armature bearings. The frame solenoid can be installed in any position, with the force preferably being applied in the axial direction only. It is fastened via threaded holes on the side or on the face. As standard, the frame linear solenoid has a chemically nickel-plated armature and a plastic-molded solenoid coil and has protection class IP 40. Versions with bellows achieve protection class IP54. Other voltages are possible on request.

The D-frame solenoid LCL is characterized by a compact design, low power consumption and short switching times. A long service life is promoted by the precision steel tube housing and maintenance-free armature bearings. The frame solenoid can be installed in any position, with the force preferably being applied in the axial direction only. It is fastened via threaded holes on the side or on the face. As standard, the frame linear solenoid has a chemically nickel-plated armature and a plastic-molded solenoid coil and has protection class IP 40. Versions with bellows achieve protection class IP54. Other voltages are possible on request.

The D-frame solenoid LCL 40x50 is characterized by a compact design, low power consumption and short switching times. A long service life is promoted by the precision steel tube housing and maintenance-free armature bearings. The frame solenoid can be installed in any position, with the force preferably being applied in the axial direction only. It is fastened via threaded holes on the side or on the face. As standard, the frame linear solenoid has a chemically nickel-plated armature and a plastic-molded solenoid coil and has protection class IP 40. Versions with bellows achieve protection class IP54.

The GEMÜ 52 directly controlled 2/2-way solenoid valve has a completely plastic encapsulated coil. The armature is sealed by a bellows made of PTFE backed by an additional safety diaphragm. The valve body is available in various materials and with a straight through or angle valve body design. —Good cleanability —The solenoid can be replaced without removing the valve body from the pipeline —Hermetic separation between medium and operator

The GEMÜ 202 directly controlled 2/2-way solenoid valve has a completely plastic encapsulated coil. The armature is sealed by a bellows made of PTFE backed by an additional safety diaphragm. The valve body is available in various materials and with a straight through or angle valve body design. Good cleanability The solenoid can be replaced without removing the valve body from the piping Hermetic separation between medium and actuator Connection types: Solvent cement socket \ Threaded connection Connection standards: DIN \ ISO Body materials: PVC-U, grey \ PVDF Conformities: EAC \ UL

We have the complete range of Explosion Proof Solenoid Valves which are having the following qualities Product Details Explosion Proof Solenoid Option is available for all the solenoid valves of the rotex.Different materials (Brass, Ss316, Aluminium) available Larger range of orifices (from 0.8 mm To 80 mm) Solenoid withexplosion-proof enclosure (Atex,Inmetro,Ul,Ccoe,Isi Approved) Low Power(5 W And 0.4w)solenoid coil available Intrinsically safe solenoid coils with circuit available All different constructions i.e.diaphragm operated,piston operated,internal/external pilot operated,spool design, puppet design, zero differential solenoid valves etc are available Also pneumatic and magnetic latching coil with exd enclosure available. Also manual reset valves and low power valves are available with exd enclosure. We are famous for manufacturing custom made valves at very competitive price. We are the suppliers to Indian railway, power plants, refineries, cement plants, pharma, etc.

AMT&C LLC carries out the FEM modelling and production, according to the customer’s technical requirements, of electromagnetic coils, coil systems, solenoids. Both uncooled and liquid-cooled systems can be designed and realized. We also offer fabrication and of measuring Helmholtz coils with a desired coil constant.

The ultra-compact and extremely light Nova Swiss solenoid valve is designed for hydrogen and inert gases applications for an operating pressure of up to 1000 bar. Your applications can now be realised even more cost-efficiently thanks to its minimal dimensions. The piloted 2-way on/off valve, manufactured from stainless steel, is monostable (normally open or normally closed). It features a flow coefficient KV = 0.6 m³/h. If the current drops at the solenoid coil, the normally closed valve closes reliably and tightly (safety function).

Product Features: • All models impregnated with a moisture and fungus resistant varnish. • Lead length of 1.5" (+/- 0.13"). • Wound for low distributed capacity by using solenoid (single coil) windings. • Includes vinyl insulation cover. • Ambient temperature range -40°C to +105°C.

In powered mode, the field strength generated in the solenoid pulls the plunger against the spring tension out of the non-powered position. Solenoids for DC and AC voltage add considerably to the range of technical variants. As the solenoid encompasses the plunger guide tube and the plunger moves in this encapsulated structure, these solenoid valves are called plunger valves.

Application: Solenoid valve system for automatic monitoring the leaks of water supply pipes and tubes. To be used in household and laboratory equipment. Installation Fully automatic monitoring can be built in to the supply pipes of a water source. The sensor lays on the floor and is connected with the control electronics through a cable. The solenoid coil and control electronics are built in to a plastic housing. The voltage supply occurs over a network cable with an adapter connector. Function: Upon energizing, the control electronics opens the solenoid valve. The sensor can monitor a water film of approximately 0.5 mm and sends a signal to the electronics. The solenoid valve is closed and an audible alarm signal is triggered. This condition will be reset by interrupting the power supply. • Normal widths from DN10 to DN50 • Fittings G1/2 to G2 • Piezo alarm system • LED indicator of operation • Drinking water admittance on enquiry