Electrical systems - Import export

E-Line FLD Indoor Busbar Trunking Systems provides aesthetics for offices as well as safe, practical and flexible solutions thereby eliminating cable clutter. E-Line FL/FLD can be installed on skirting or at table level where Main or UPS power is required, or where structural cabling is required.

E-LINE Binrak Channels Series are manufactured as Pre galvanized in a Standard heavy service type according to TSE and ISO 10143 standards, hot dipped according to TS EN ISO 1461 standard in 3mr Stainless steel lengths (304, 304L, 316, 316L) as standard. It is designed to hold the support systems in facilities and buildings as well as mechanical, electrical and industrial products.Provides immediate and easy assembly with the rapid traverse nut connection. Due to its modular design structure, it allows connection from any point and reduces the margin of error.

E-LINE A series and E-Line Seismic suspension systems are used in buildings and factories; in concrete or steel structures to support the Busbar, Conduit and Cable Ladder etc. Service and lightweight suspension type variations are available according to the weight of the system to be supported.Together with the evolving installation, it offers optimum solutions for the installation of the support systems.

URC (Uni-Rail Conductor) Trolley Busbar are designed where each conductor is assembled as a separate line and the current collector car performs uninterrupted energy transfer to the device.E-Line URC Trolley Busbar can be used indoors and outdoors, in harsh conditions as the conductors are in separate housings. Eliminated the use of suspended and reeled cables in conventional system.

The electricity is conveyed from the conductors via the brushes in the trolleys, which move with the machinery, to supply continuous power to the mobile machinery This eliminates the possibility of accidents and malfunctions associated with the movement of cables.

The electricity is conveyed from the conductors via the brushes in the trolleys, which move with the machinery, to supply continuous power to the mobile machinery This eliminates the possibility of accidents and malfunctions associated with the movement of cables.

Lighting and Low-Power Busbar System (25A-40A-63A)E-Line KY-S Busbar Systems has been designed for buildings and industrial facilities which have lighting and outlet circuits with minor electrical machinery and equipment that requires three phase and/or single phase electricity with 25A,40A and 63A. KY-S Busbar with its 10A – 16A tap-off plugs and 32A tap-off boxes are being manufactured on fully automated machines that uses the most recent technology in accordance with ISO 9001 and its quality assurance system certification. Products have been designed in accordance with IEC 61439-6 and fully tested. Busbar housings are being manufactured from pre-galvanized sheet metal ,it could also be manufactured in RAL 7038 colour on request.

Rapidly increasing electricity, data and multimedia requirements in various types of factories, work places and living areas are also required in new building designs. For this reason, flexible, sound, modular, safe and aesthetic infrastructure systems that will conform to rapidly changing and continuously increasing requirements in new buildings are gaining momentum.

Lighting Distribution Busbar (25A - 32A)E-Line DL/SL group Busbar Trunking Systems are used in lighting circuits that require 25 A and 32A single phase or three phase electrical current in buildings and industrial facilities. 10A / 16A tap off plugs (with and without cartridge fuses) are designed to supply lighting circuits according to their attributes.

Low-Power Busbar System (40A-63A)E-Line KY-S Busbar Systems has been designed for buildings and industrial facilities which have lighting and outlet circuits with small electrical machinery and equipments that needs three phase and/or single phase energy needs with 40A and 63 A. KY-S Busbar with its 10A – 16 A tap-off plugs and 32A tap-off boxes are being produced fully automated machines that uses most recent technology in accordance with ISO 9001 and with its quality assurance system certification. Products has been designed in accordance with IEC 61439-6 and tested. Busbar housing is being produced as pre-galvanized sheet also if requested it could be produced as painted with RAL 7038 color.

Installation accessories are standard materials which are necessary to use for the mounting of the cable management systems and supporting accessories.Available finishes for our fixing accessories are Electro galvanized, Lacquered and Stainless Steel products.

Power distribution

Head Lamps, Signal Lamps, Alternators, Sensors, Electrical Cables etc We have all Trucks spare parts. Just contack us by mail or whatsapp number: export@samtruckt.com.tr Whatsapp: +90 535 830 18 19 Exports sales: Sami Caner

Cable Extension Cord Reel, let you carry untill 50M cable very easy all working conditions and can be easily reinstall the cable.

Cable Extension Cord Reel, let you carry untill 50M cable very easy all working conditions and can be easily reinstall the cable.

Cable Extension Cord Reel, let you carry untill 50M cable very easy all working conditions and can be easily reinstall the cable.

3000kVA Uganda Government Project

Delta#AVR#UPS#Generators

Our project; It is about developing R&D techniques in order to benefit more efficiently from infrared heaters used especially in open areas in the heating sector. In this context, it is aimed to expand the beam scanning angle and increase the benefit rates of infrared rays in the environment heating by using different geometry shapes of the reflective reflector sheet of the heater and the carbon filament glass resistor forming the heat source.

Considering combined energy production systems are considered, only systems where heat and electricity production are made simultaneously are called cogeneration systems. In cogeneration systems; The heat energy, which is the side output of the electricity production system, is evaluated. As a result, since losses are greatly reduced, fuel consumption is significantly reduced and profitability based on energy efficiency emerges.

Prefabricated buildings use to create different areas like office, accommodation, restaurant, clinic, canteen etc. The other solution is prefabricated classrooms. For temporary or permanent school projects the prefabricated classrooms is the best way. It is easy to have special classrooms with providing details like technical details, electrical systems. To escape long lasting installation process of traditional buildings the most useful way is to prefer prefab buildings. Module-T Turkish manufacturer of prefabricated buildings work according to customer request to provide best solution for their projects.

Framework galvanized bolted steel. Wall / Facade Structure made of galvanized steel, cladding of nonflammable Plasterboard A1. Cladding of concrete fiber panels (natural, rock and wood appearance). Roof Panel and galvanized steel roofs, a wide selection of roof coating (galvanized and painted trapezoidal sheet or sandwich panel coating with polyurethane insulation, or tarred corrugated plates). Metallic or Pvc rain gutters and drainage pipes. Insulation Rock wool or glass fiber Door exterior (Steel, aluminum, Pvc, fireresistant doors, antiintruders protection); interior( Mdf, Aluminium, Pvc, fireresistant doors) Windows Doubleglass with Pvc or aluminum frame, doublepanel windows, sliding or guillotinestyle. Parasol, rolling shutter in Pvc, steel antiintrusion protection. Painting Exterior in silicone or epoxy. Interior polyurethane. Electrical system lighting structures, sockets and switches, cables, fuses and fuse boxes, relays.

prefabex FLAT PACK OFFICE are manufactured and supplied as a complete package which includes the building structure, sandwich panels, all of the internal and external finishes, doors and double-glazed window units, plumbing installation and the electrical system and lighting. Modular FLAT PACK OFFICE containers are designed to provide optimal comfort. The walls, and ceiling are made of insulated sandwich panels providing a controlled internal environment with optimum insulation values. Internal partition walls and external doors are also fully insulated. Flat pack buildings can be configured very quickly by joining modules together side by side or end to end, or by stacking them to create two or even three-story buildings. The main advantages of flatpack containers are their economic prices and quick assembly.

IP68 Aluminium Housing Cast Resin Busbar (600A...6300A)Aluminium housing covers the “DUROCOMP” composite material that is manufactured from specially selected pure silicium minerals and epoxy resin and has superior temperature and mechanical operation features and insulates the E-Line CCR Busbar from external elements.

Busbar System - Reliable Energy DistributionE-Line KO II Series "medium range busbar" systems provide suitable solutions for electricity transmission and distribution in medium-sized buildings or industrial facilities. They can be used in horizontal or vertical applications. Tap off box solutions comprise sheet metal boxes with circuit breakers, or plastic boxes for small currents which are compatible with Miniature Circuit Breakers.E-Line KO-II Busbar system is used as a horizontal or vertical electricity distribution line between 160A-800A, wherever energy distribution is required.

Power Busbar (40A-63A)"E-Line KAP Busbar Systems" can be used to feed lighting and small power installations in commercial and industrial buildings such as offices, factories, workshops, warehouses and airports.

Lighting Busbar (25A up to 32A) E-Line KAM Series Lighting Busbar Systems has been designed to supply lighting fixtures with electrical current. It can be used to supply power to industrial, decorative or alternate lighting fixtures.

Lighting Busbar Trunking (25A) E-Line KY-S Lighting Busbar Trunking Systems has been designed for buildings and industrial facilitieswhich have lighting and outlet circuits with diminutive electrical machinery and equipment that needs three phase and/or single phase energy requirements with 25A.KY-S Lighting Busbar with its 10A – 16 A tap-off plugs and 32A tap-off boxes are being manufactured by fully automated machines that uses the latest technology in accordance with ISO 9001 and with its quality assurance system certification. Products have been designed in accordance with IEC 61439-6 and tested. Busbar housing are manufactured as pre-galvanized sheets, additionally if requested, it could be manufactured applying RAL 7038 colour.