Results for
ECKARDT SYSTEMS GMBH
Germany
High-tech system for maximum process reliability. Automatic nozzle SDA 30: high-tech system for maximum process reliability The SDA 30 is an integrated system consisting of a nozzle and a control module. The nozzle is equipped with a Hall sensor that monitors and controls the position of the nozzle needle. All operational settings/adjustments (oil rate and so forth) are automated via the controller of the proprietary Eckardt control unit. This makes it possible to control up to four nozzles at the same time.
Request for a quoteRONIX GMBH
Germany
Manufactured by hot press production process with full automatic machines which ensures high performance and efficiency -High quality raw material formulation of diamond tips minimizes the friction and delivers a faster and cooler cut -10mm height of cutting rim guarantees an optimum life time -Manufactured by high quality material which optimizes cutting performance and ensures durability -Ideal for all types of granite -Suitable for both wet and dry cutting
Request for a quoteRONIX GMBH
Germany
Manufactured by hot press production process with full automatic machines which ensures high performance and efficiency -High quality raw material formulation of diamond tips minimizes the friction and delivers a faster and cooler cut -10mm height of cutting rim guarantees an optimum life time -Manufactured by high quality material which optimizes cutting performance and ensures durability -Ideal for all types of granite -Suitable for both wet and dry cutting
Request for a quoteFUSED MACHINERY
Belgium
The LT COMBO is a combination machine for laser cutting sheet, round, square and rectangular tubes with different open/closed section, made of iron or steel (soft and alloy). Thanks to the special machine structure, there is an automatic transition from sheet metal processing to pipe processing and vice versa in just a limited time. This particular machine is in good condition and can be viewed in operation. Availability: 09/2023 More info on request.
Request for a quoteK-TECH ELECTRONIC VERTRIEBS GMBH
Germany
for electrical and mechanical components for safety transport, storage, or automatic processing optional inclusive lid stackable nonconductive, ESDcompatible from antistatic up to volume conductive
Request for a quoteFILLTECH GMBH
Germany
A very compact, mobile and user-friendly filling system for a wide range of cylinders with weights up to 6 kilograms. Highlights Variable filling connections Easy, precise and safe to operate Automatic filling process Anodized aluminum frame; stainless steel cover plate Optimal cost/performance ratio Build in pump Legal for trade Technical Data Filling-range: approx. 50g - 6kg/ up to 13 lbs. fill weight Weighing- range: up to 15 kg/ 35 lbs. Dimensions: approx. 600 x 400 x 1200 mm/ 24 x 16 x 47 in. Weight: approx. 50 kg/ 110 lbs. Weighing System Two load cells SysTec IT 1000 industrial weighing terminal Automatic tare setting Automatic shut-off at target weight Manually operated relief with ball valve Optional Filling Connections for Pico-Fill Filling unit for 1/2 in. trapezoid- and side-outlet valves Pneumatic press-on, cartridge filler and other connections on demand
Request for a quoteFILLTECH GMBH
Germany
The UniFill CO 2 / N 2O is an ergonomic filling system for a wide range of cylinders with weights up to 50 kilograms. Highlights Fill connection with quick connector or fast hand wheel Easy, precise and safe to operate Calibratable Many IT communication capabilities Optional printer and / or scanner Optional vacuum prior to filling Integrable pump control Legal for trade Technical Data Filling-Range: approx. 4 – 50 kg/ 9 – 110 lbs. fill weight Weighing range: 0-150kg/ 0-330lbs Scale division: 0-60kg - 20g, 60-150kg -50g Cylinders: up to Ø 300 x 1800 mm/ 11.8 x 70.9 in. Dimensions: approx. 600 x 600 x 1400 mm/ 24 x 24 x 55 in. Weight: approx. 100 kg/ 220 lbs. Weight Scales and Controls Digital, freely programmable SysTec IT 8000 industrial weighing terminal 999 storable cylinder type (PLU) Automatic filling process, manually operated solenoid relief valve Monitoring of fill weight, integrated tare weight control Enhanced software, i.e. topfilling (only the fill parameter must be set,
Request for a quoteFILLTECH GMBH
Germany
Using highly advanced gas filling Small and Medium Enterprises technology is no longer a privilege for large enterprises. Over the last 15 years Filltech developed, in its own research center in the heart of Germany, different standard filling solutions. Through this experience, Filltech has now developed UniFill Complete; a standard gas filling solution for small and medium enterprises, using highly advanced technology. UniFill Complete is a ready-to-use, standardized CO 2 und N 2O gas filling station with a wide filling range for cylinders between 4 and 50 kg. Highlights Easy, precise and safe operation Entry-level, low-cost solution Automatic filling process with bypass valve Pumping set included Integrated pump control Legal for trade
Request for a quoteFILLTECH GMBH
Germany
The profiFill 4.0 is a highly flexible filling solution for CO 2/N 2O or mixed gasses. Through a pre-programmed filling process, which can be easily configured, adjustable individual solutions and consistent documentation can be ensured. The ProfiFill station is a universal filling station. No matter what cylinder your market requires, our equipment can be adapted to your needs. A clamping unit ensures safe and ergonomic filling. Highlights Ergonomic, durable, fast Lifting unit for short cylinders Pneumatic valve open/close unit Maintenance-free DryLin T-Linear guiding 4 load cells for precision and easy calibration Pneumatic filling head Legal for trade Technical Data: Weighing range: 0-150kg / 0-330lbs. Filling range: 6-50 kg / 0-330 lbs. Cylinders: up to 300 x 1800 mm / 11.8 x 70.8 in. Dimensions: 910 x 800 x 2300 mm / 35.8 x 31.5 x 90.5 in. Weight: approx. 300 kg /661 lbs. Weight Scales & Controls 999 storable cylinder types (PLU) Automatic filling process; automatic closin
Request for a quoteTEXEL
United Kingdom
Automatic processing of digital human body measurements with high accuracy 3D surveys provide the ability to conduct additional research based on collected 3D models without the repeated participation of people. As long as there is an Internet connection, the obtained 3Dmodels can be accessed from anywhere, with each client receiving a unique key for connecting via API. A comprehensive IEEE study from the University of Valencia has confirmed the high accuracy of all obtained body measurements. Motion Animation scanning a person inmotion will allow you to automatically add movementanimation, covering all parts of the human body
Request for a quoteSTRECKFUSS SYSTEMS GMBH & CO. KG
Germany
TYP C 043/B Cutting, stamping and bending device for axial components Description To facilitate the placement of short axial leaded components that must be cut before insertion into the circuit board to the appropriate length and bent to the required height and - if necessary - marked. This axial taped components are processed in high- components. The machine type C 043 / B can be adjusted using the adjustment spindles cutting length and the embossing position. The setting is displayed on the relevant scale of the device. Optionally can be monitored through a digital display setting. The embossing tool is specifically for connecting pins and is manufactured according to customer requirement. The machine can be upgraded for the various tools. The taped components are fed into the machine and processed automatically. The transport speed is infinitely variable. The tool change for other forms of bending takes about 5 minutes. Components
Request for a quoteSTRECKFUSS SYSTEMS GMBH & CO. KG
Germany
TYP C 043/E Cutting, stamping and bending device for axial components Description The Streckfuss machine Type C 043/E is designed, to cut stamp and bend axial leaded components for both horizontal and vertical mounting. To make the insertion of components with short leads into p. c. boards possible, the leads have to be cut to suitable length, bend to the required pitch and - if necessary- stamped. Both, suitable length and required pitch can be adjusted by adjusting screws. After this set- up the components can be processed. Option: the adjustments can be checked by a digital display. The stamping result for the leads depends on the used tool. These tools can be manufactured to meet customer requirements. The machine can be re- set for the different tools. The taped components can be processed automatically. The processing- speed is continuously variable. The tool change for different bending dimensions takes about 2 minutes. Components
Request for a quoteSTRECKFUSS SYSTEMS GMBH & CO. KG
Germany
TYP C 043/ES Cutting, stamping and bending device for axial components Description To make the insertion of components with short leads into p. c. boards possible, the leads have to be cut to suitable length, bend to the required pitch and - if necessary- stamped. Both, suitable length and required pitch can be adjusted by adjusting screws. After this set- up the components can be processed. Cutting length and pitch are fully adjustable. The stamping result for the leads depends on the used tool. Leadforming ist tool specific and can be manufactured to meet customer requirements. The difference to the types C 043 and C 043 E is the integrated Pneumatic which makes the rearrangement of the Bending- and Formingtools possible. This means, that the tools can be approached to the components. Espacially bendings with Flush- Mount- bead can be done. The taped components can be processed automatically. The processing- speed is continuously variable. The tool change for different bending dimensions takes about 5 minutes. Components
Request for a quoteSTRECKFUSS SYSTEMS GMBH & CO. KG
Germany
TYP C 043/BS Cutting, stamping and bending device for axial components Description To facilitate the placement of short axial leaded components that must be cut before insertion into the circuit board to the appropriate length and bent to the required height and - are marked - if necessary. This axial taped components are processed in high- components. The machine type C 043/BS can be adjusted using the adjustment spindles cutting length and the embossing position. The setting is displayed on the relevant scale of the device. Optionally can be monitored through a digital display setting. The embossing tool is specifically for connecting pins and is manufactured according to customer requirement. The machine can be upgraded for the various tools. The taped components are fed into the machine and processed automatically. The transport speed is infinitely variable. The tool change for other forms of bending takes about 5 minutes. Components
Request for a quoteSTRECKFUSS SYSTEMS GMBH & CO. KG
Germany
TYP C 067 Cutting, stamping and bending device for radial components Description The Streckfuss machine Type C 067 is designed to process power transistors of types TO 18, TO 92, TO 126, TO 127 and TO 220 with 3 or more radial leads. Also different components (e.g. LED's) can be processed, which fit into the supply- shaft of the machine. The operation of the machine is restricted on filling up the exchangeable feed magazine with components to be processed. Optionally the machine can be equipped with a round- conveyor, to supply loose components automatically to the machine for processing. The tools are equipped with strain relief- valves to eliminate stress to the component body, when the leads are bend and cut. Once formed and cut the component is stored in a collection bin, seperated from shavings. The tool- change for different forms takes less than 5 minutes. Components
Request for a quoteSTRECKFUSS SYSTEMS GMBH & CO. KG
Germany
TYP C 043 Cutting, stamping and bending device for axial components Description The Streckfuss machine Type C 043 is designed, to cut stamp and bend axial leaded components for both horizontal and vertical mounting. To make the insertion of components with short leads into p. c. boards possible, the leads have to be cut to suitable length, bend to the required pitch and - if necessary- stamped. Both, suitable length and required pitch can be adjusted by adjusting screws. After this set- up the components can be processed. Option: the adjustments can be checked by a digital display. The stamping result for the leads depends on the used tool. These tools can be manufactured to meet customer requirements. The machine can be re- set for the different tools. The taped components can be processed automatically. The processing- speed is continuously variable. The tool change for different bending dimensions takes about 2 minutes. Components
Request for a quoteDECAPAC
Belgium
DECAPAC has a large programme of rigid sealable containers and trays. Suitable for vacuum and gas flush (MAP) options Overlaying lids available for a large number of dimensions Perfectly destackable for automatic processing Easy to recycle
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
DECAPAC
Belgium
DECAPAC offers you an “Easy Saving” line of ribbed MAP trays in more than 60 different sizes. Easy Saving Reeks Particularly favourable price level Suitable for microwave Available in different colours (by special order) Also available with barrier (EVOH) Suitable for a variety of purposes Perfectly destackable for automatic processing Particularly high stability due to ideal material distribution Deliverable with absorbent pad
Request for a quoteUKF STAINLESS LTD (THE UKF GROUP)
United Kingdom
Our specialist-built cutting shop is fully equipped to suit your needs. In addition to our laser cutting facilities, we have a bank of fully automatic and semi-automatic cutting machines ready to process materials up to 3,000mm in length. With the capability to hold tight tolerances (+/- 0.20mm) on diameters ranging from 6mm - 153mm, our cutting services are the cost-effective option for high volume repetitive cut orders. Whether you choose the built-in deburring and washing options or the stand alone alternatives available alongside the cutting service, your components will be completed to a high standard of finish.
Request for a quoteResults for
Automatic process - Import exportNumber of results
20 ProductsCountries
Company type