Squares - Import export

A miniature 4 pad SMD TCXO in a 5.0 x 3.2 x 1.3mm package. Stability from ±1ppm -30°~+75°C. HCMOS square wave output. Frequency range from 6.4MHz to 40.0MHz. Supply voltage of 2.5V, 3.0V, 3.3 Volts. RoHS compliant. Low cost TCXO with short delivery A miniature 4 pad SMD TCXO. Stability from ±1ppm -30°~+75°C. HCMOS square wave output. Wide frequency range: 6.4MHz to 40.0MHz Supply voltage 2.5, 3.0 or 3.3 Volts RoHS compliant Wide frequency range. RoHS compliant. High spec with low cost. Quick delivery

Miniature 4 pad SMD TCXO. Stability from ±1ppm -30°~+75°C. HCMOS square wave output. 'V' group TCXO characteristics. Frequency range 27.0MHz to 200.0MHz. RoHS Compliant. Miniature 4 pad SMD TCXO. Stability from ±1ppm -30°~+75°C. HCMOS square wave output. Frequency range 27.0MHz to 200.0MHz. RoHS Compliant.

A miniature 4 pad SMD TCXO in a 7.0 x 5.0mm package. Stability from ±0.5ppm. HCMOS square wave output. Frequency range from 40MHz to 156.0MHz. Supply voltage of 2.5V, 3.0V or 3.3 A miniature 4 pad SMD TCXO (EML572T) or VCTCXO (VEML572T). Stability from ±0.5ppm. HCMOS square wave output. RoHS compliant. Volts. RoHS compliant. For frequencies 1.56MHz to 40MHz see part EM572T. For a CMOS TCXO from 1.56MHz to 40MHz see part EM572T.

For new designs see part M572T(kHz). HCMOS TCXO at 32.768kHz or from 20kHz to 50kHz. 7.0 x 5.0mm SMD package. Stability from ±1ppm -30°~+75°C. Part is RoHS compliant. HCMOS TCXO at 32.768kHz or from 20kHz to 50kHz. 7.0 x 5.0mm SMD package. Stability from ±1ppm -30°~+75°C. Part is RoHS compliant. Supply voltage 3.3 or 5.0 Volts Frequency stability from ±1ppm over -30 to +75°C RoHS compliant For new designs see part M572T(kHz)

HCMOS square wave TCXO With ultra-low current consumption, from 2.3mA. The part is packaged in a 7.0 x 5.0mm SMD package. Stability is from ±1ppm -30°~+75°C. Part is RoHS compliant. HCMOS square wave TCXO With ultra-low current consumption, from 2.3mA. Miniaturized 7 x 5mm SMD package Consumes less than 4mA at 20.0MHz with 3.3V supply Low phase noise RoHS compliant The part is packaged in a 7.0 x 5.0mm SMD package. Stability is from ±1ppm -30°~+75°C. Part is RoHS compliant

HCMOS TCXO at 32.768kHz or from 20kHz to 50kHz. 7.0 x 5.0mm SMD package. Stability from ±1ppm -30°~+75°C Miniature 7 x 5 x 2.3mm SMD package Frequency range: 20.0kHz to 52.7kHz including 32.768kHz Supply voltage +3.3 Volts Frequency stability from ±1ppm over -30 to +75°C RoHS compliant

A 14 pin Dual-in-Line TCXO. Stability from ±1ppm over -30° ~ +75°C. HCMOS square wave output. Wide frequency range 1.25MHz to 156.0MHz. 14 pin DIL through-hole TCXO without trimmer. Stability from ±1ppm -30°~+75°C. 14 pin DIL industry-standard package Wide frequency range: 1.25MHz to 156.0MHz Supply voltage 2.5, 3.0 or 3.3 Volts RoHS compliant CMOS square wave output. Wide frequency range

A NO nonsense value for money commercial instant shelter designed for ease of use and strong performance. This gazebo marquee is the go to for commercial use. - Frame + Canopy: 29.5kgs (Folded size 156cm x 24cm x 24cm) - Sidewall Set: 11kgs (Folded size 16cm x 46cm x 46cm) - Maximum headroom on highest setting: 205cm Frame: - High strength multi ribbed 6061-T6 aluminium extrusion with anodised finish that protects it from the elements - All frame work is assembled with nuts and bolts for ease of maintenance - Strong 37mm square aluminium box section legs, 2mm gauge - Multi ribbed extruded cross bracing truss bars are constructed from 28mm x 13mm tubing for maximum strength - Telescopic legs with 4 adjustable height settings - Quick release pull pin adjusters - Large triangular steel footplates with staking holes for secure anchoring - Sliders and connectors a

Allignment Busing and Thread Hole for Quick Accurate Set-ups Ground Flat and Parallel Threaded Holes for Side-Location Cast iron gridded cube with mounting holes. Grid pattern with allignment bushes and threaded inserts for ease of set-up. Ground flat parallel and perpendicular for accuracy. Holes for side location to allow precise loading and setting up of the tombstone.

2mm Range per Collets Sizes Up To 30mm Across Flats Smooth Bore as Standard, Other Finishes Available Special Profiles Available D673 Varibore square collets are to suit 42mm capacity collet chucks. Also known as M673, these collets have a 2mm range. Supplied smooth as standard we can supply with alternate finishes and in special profiles. D673 suit the following collet chucks- Klamp CRL42 Klamp QCRL42 Crawford CDC42 Crawford CDC-42-S Crawford QC-42

2+2 Independent jaws give contact with all four jaws Long stroke grip compounets with variable size Ideal for square or elliptical parts Compatible with large, readily available, range of jaws Kitagawa chucks are manufactured from high grade alloy steel. The Kitagawa HW series are four jaw chucks but unlike conventional four jaws it works off a 2+2 system clamping two jaws indapendently garentees gripping with all four jaws unlike standard chucks. HW series chucks are supplied with blank drawnut and a set of t-nuts as standard.

Round, Hexagon, Square or Emergency types available Available in Smooth or Serrated Clamping tolerance of +/- 0.5mm Counter boring and special profile shapes are available upon request DC Varibore Collets have the same accuracy specification as spring collets whilst maintaining a gripping range of +/- 0.5mm. Supplied with either smooth or serrated gripping surface. Serrated collets are ideal for aggresive first operation gripping of rough bar work.Vulcanized rubber between the hardened steel collet segments provides excellent protection against coolant and chip ingress. Counter boring and special profile shapes are available upon request.

2mm Range per Collets Sizes Up To 42mm Across Flats Smooth Bore as Standard, Other Finishes Available Special Profiles Available D677 Varibore square collets are to suit 60mm capacity collet chucks. Also known as M677, these collets have a 2mm range. Supplied smooth as standard we can supply with alternate finishes and in special profiles. D677 suit the following collet chucks- Klamp CRL60 Klamp QCRL60 Crawford CDC60 Crawford CDC-60-S Crawford QCD-60

Provides a square surface for the workpieceto locate against Wider locators available to accommodateshort parts Part locators are an optional accessory that bolt to the front of the mandrel and provide a square surface for the workpiece to locate against. Wider locators available to accommodate short parts.

Nurge high-quality Square (rectangular) Plastic Embroidery Hoops are perfect for most styles of needlecraft, embroidery & cross stitch. They make it easy to sew into corners. The quality of the plastic hoop & tension screw keeps the fabric firm when sewing. The hoops also popular for machine embroidery in some machines. They are lightweight and rigid, unlike many cheaper plastic hoops. Available in sizes: 79836 Nurge 170-11      95mm (3 3/4") x  110mm (4")          x 10mm deep    79837 Nurge 170-12    145mm (5 3/4") x  165mm (6 1/2")  x 10mm deep   79838 Nurge 170-13   195mm  (7 1/2")  x  220mm (8 1/2")   x 10mm deep            79839 Nurge 170-14   250mm ( 10" )    x   280mm ( 11" )       x 10mm deep

Capacity 2550 x 6.35 mm 2 x support arms 1 x Squaring arm Rake adjustment Adjustable back gauge with DRO Interlocked rear guard Weight 4000kgs

12 Square Metre Triple Kit Our most flexible stage kit allowing you to make flat or tiered stages at 200, 400 or 600mm high or any combination of these heights, the multi-levels making for a more interesting performance. This stage is ideal where you have different height requirements for different applications such as school drama performances. The stage can also be configured as a very effective choir riser system 4m wide with 3 tiers each 1m deep. With the front row standing on the floor this choir riser configuration will comfortably accommodate 32 adults, either standing or seated on suitable chairs. When using chairs on staging we recommend the use of toe rails to prevent the chair legs slipping off the stage. The complete stage stores on one trolley. £3,600.00 ex. VAT ** Ask for a quote **