High sensitivity - Import export

The Conformable TactArray is a ~1mm thick flexible sensor constructed from soft, conductive cloth and captures pressure distribution between two objects in direct physical contact. The Conformable TactArray can accommodate varying degrees of curvature and can output accurate, repeatable data even while wrapped around irregular shapes. Key Features and Benefits: Maintain high-resolution and capture quality data even around complex shapes High resolution, sensitivity, and repeatability allow for consistent capture of accurate data The sensors can capture a minimum sensing pressure of 10 Pascal Save time and improve results through repeatable accuracy and less recalibration time needed Available in a wide range of size configurations, pressure ranges, and resolutions Comes standard with the powerful Chameleon Visualization Software

The PPS TactileGloves are tactile pressure sensor gloves with embedded sensing elements throughout the palm and fingers, allowing for natural and accurate testing of pressures applied to and exerted by the hand. Nearly any hand operation can be measured accurately through the 65 individual highly sensitive sensing elements within each glove. Sensor Glove Features: Ensure a natural test environment with the only glove hand sensor on the market User friendly, comfortable to wear and no adhesives or wires to get in your way High-resolution, sensitive sensors detect even the lowest pressures (0.1oz/3g) Meant to handle the real world. It's wireless and battery powered. Delivered in pairs (Left + Right). Available glove size: small, medium, and large.

F670LV is a breakthrough instrument able to leak test very large volumes using a new patented technology (Based on Pressure Decay) thanks to the high sensitivity of our latest pressure transducer. By using ATEQ’s F670LV Differential Pressure Decay leak Tester with DNC, it is now possible to detect pressure drops below 0.1 Pa/sec. Parts with very large volumes such as tanks, electrical car batteries… An EV battery housing is a great application for ATEQ’s new DNC leak testing technology since it is a large, flexible component that is easily affected by variations in background noise. 128 programs Large Flow Valves for fast management of the parts Fully integrated electronics and pneumatics Flexible communication format: RS232, USB

F620LV is a breakthrough instrument able to leak test very large volumes using a new patented technology (Based on Pressure Decay) thanks to the high sensitivity of our latest pressure transducer. By using ATEQ’s F620 Large Volume Differential Pressure Decay Leak Tester with DNC, it is now possible to detect pressure drops below 0.1 Pa/sec. Parts with very large volumes such as tanks, electrical car batteries… An EV battery housing is a great application for ATEQ’s new DNC leak testing technology since it is a large, flexible component that is easily affected by variations in background noise. 128 programs Large Flow Valves for fast management of the parts Fully integrated electronics and pneumatics Flexible communication format: RS232, USB

CXOQ oscillators are ultra-miniature, surface mount units packaged in a 2.50 x 2.00 x 0.89mm package. The oscillators are capable of withstanding high shock environments. The design and build standard including availability of full 'MIL' testing ensures great reliability. This is a Statek product manufactured by Statek Inc, America. Contact Euroquartz Sales or Technical for details. High shock survivability High frequency stability Low acceleration sensitivity (HG version) CMOS and TTL compatible Low power consumption Full military testing per MIL PRF 55310 available Optional enable/disable Low EMI emission Hermetically sealed ceramic package

Model No.: SMT4030-26; Product Attributes : *High sensitivity *High SNR output *High temperature reflow-assembly. Technical parameter: Dimension: 4.0*3.0*1.0mm; Sensitivity @1KHz: 26 ± 1dBFS; SNR: 63-65 dB; Output signal: digital; Sound Port: bottom; AOP(dB SPL): 120; Voltage: 1.62~3.6V; Current: 600uA; Directional: Omni-directional.

Model No.:LSPU1640OAH12-1; Product Attributes : *Open structure and fission; *Compact and light weight; *High sensitivity and sound pressure; *Less power consumption; *High reliability. Applications: People Detection; Automated Store Displays; Booths & Kiosks; Lithium Battery Applications; Solar Powered Applications; Remote Monitoring Stations; Non-Contact Detection; Shipping systems; Mobile Robotics; Chemically Hazardous Locations; Tank Level Measurement; Freight Management Systems; Liquid Level Control; Tide/Water Level Monitoring; Dimensioning & Positioning; Long Range Object Detection; Proximity Detection; Security Systems. Technical parameter: Using Method: Transmitter/receiver; Frequency: 40±1KHz; S.P.L: min. 110dB (10v/30cm); Frequency: 39±1KHz; Sensitivity: min.-65dB/V/µ bar; Capacitance: 2500pF±25% at 1KHz; Directivity: 50 degree; Detectable Range: 0.7~18m; Housing Material: Aluminum.

The BGH series base can be used with any of the BGH series pistons to give ranges 1-120 bar with a BGH120, 2-300 bar with a BGH300, 1-700 bar with a BGH700 and 1-1200 bar with a BGH1200 . All units are top loading for ease of use and weight sets are fully interchangeable. This means that weight sets in alternative pressures are readily available and customers with more than one %*+ series tester can interchange weight sets between testers of the same range. The base features a dual area screwpress which allows low-pressure priming and high-pressure control. The BGH is a robust design, proven over many years usage. The unit has a 1/16in2 fully hardened and stabilised tool steel piston. This unit gives extremely good sensitivity for high accuracy calibration, yet is tough enough for regular use in a workshop environment.

We offer a range of double sided, high tack, pressure sensitive, solvent acrylic adhesives, including foam adhesive for use on uneven surfaces or where shock absorption is required. tesa® adhesives and our own adhesives are immediately usable, temperature resistant, provide high shear resistance and contain plasticiser barriers to maintain performance. We have the ability to bond adhesive to flexible magnetic sheet, flexible magnetic extrusion, flexible ferrous sheet and steel tape to your specification. The choice of adhesive will usually be dependant upon the intended application for the finished product. In addition to the branded adhesives supplied by tesa® we also offer our own adhesives as an alternative option.

JME portable Betatron systems are a range of compact circular electron accelerators producing a high energy directional X-Ray beam. The Betatron systems are easy to assemble, operate and maintain. They contain no moving parts or cooling liquids so maintenance required on the systems is minimal. They are capable of producing radiographs of very high contrast, sensitivity and resolution allowing operators to meet the tightest inspection standard. JME offer 4 systems within the Betatron range each with a different maximum energy, the outputs are 2.5, 6, 7, 7.5 and 9MeV. The energy output on all systems is variable from 2Mev through to the maximum energy and adjustments can be made in 0.1MeV increments. The systems offer cost savings and a greater degree of portability when compared with systems such as linear accelerators (Linacs) which are much larger, non-portable, and can cost up to 10 times the price of a JME Betatron.

The Stealth uses digital signal processing technology and has high sensitivity levels to ensure the detection of the smallest ferrous, non-ferrous and stainless steel contaminants. The built-in data collection software with USB data transfer establishes the Stealth as an effective critical control point complying with stringent HACCP regulations.

The Stealth uses digital signal processing technology and has high sensitivity levels to ensure the detection of the smallest ferrous, non-ferrous and stainless steel contaminants. The Halo Automatic Testing System is highly recommended for use with the Vertex system, as testing is often challenging in applications the Vertex is suited for.

The precision detector utilizes digital signal processing technology with high sensitivity levels to clearly identify the presence of a metal contaminant. Ferrous, non-ferrous and stainless steel fragments are successfully detected, and when equipped with a reject valve, rejected from production. A variety of valves, pipe materials and fittings are available to easily integrate into existing systems; all standing up to high pressure, temperature and washdown environments.

Our website offers a comprehensive selection of Littmann stethoscopes to cater to every healthcare professional's needs. Whether you're a seasoned doctor, a dedicated nurse, or a medical student starting your journey, we have the ideal instrument to elevate your diagnostic experience. Stethoscopes for Every Specialty: Classic III: The versatile workhorse, perfect for general examinations in adult and pediatric settings. Cardiology IV: Amplify heart sounds with a larger bell and high acoustic sensitivity, ideal for cardiologists and critical care professionals. Lightweight II: Experience comfort and portability without sacrificing performance, ideal for nurses and busy medical environments. Electronic Stethoscopes: Explore the future of diagnostics with amplified sounds and digital technology, perfect for specialists seeking enhanced precision.

The Vibranivo® - vibrating fork for point level measurement, with its robust stainless steel extension and high sensitivity, is widely used in storage silos and process vessels. The Vibranivo® vibration level switch is robust, easy to operate and can, via its series range, be precisely configured for each application. Electronically stimulated piezos cause the fork to vibrate. As soon as the sensor is covered with material, the vibration is dampened and the resulting electrical current change causes the output signal to switch. Once the material level falls below the sensor, it is free to vibrate again and the output signal is reset. International approvals for use in hazardous locations (gas and dust).