Flour - Import export

It is designed to feed the control sifter properly. The flour distributor is mounted on control sifters. It enables to feed the control sifters regularly and in equal quantities. Flour enters the distributor through the middle center and is distributed evenly from all outlets of the distributor with the help of a rotating chamber driven by a reducer motor. Various capacities and models are available according to the requirement of the sieve. Application Fields ◾ At food processing industry ◾ Flour and semolina mills ◾ Macaroni factories ◾ Feed mills ◾ At other similar industrial plants

Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories Features & Advantages ◾ Complete control of the PLC ◾ High speed weighing and long service life thanks to the stainless steel load cell ◾ Special protection class IP 67 ◾ Easy calibration ◾ Various feeding system according to the type of product to be weighed ◾ Data information based on actual weight values ◾ Bulk flow measurement as required Show in total value weighed ◾ The ability to work individually or in a network

◾ Fully PLC controlled. ◾ Precision weighing and long life with stainless steel load cells. ◾ 5/10kg.-10/25kg.and 25/50kg. weighing December. ◾ Automatic filling into bags with an open mouth. ◾ Lower and upper tolerance values that can be programmed separately. ◾ Automatic sack shaking mechanics. ◾ Separate weighing container feeding system according to the type of product to be bagged. ◾ Double coil feeding driven by separate motor. ◾ Single coil feeding driven by two-speed motor. ◾ Belt feed driven by two-speed motor. ◾ According to the product to be bagged and the desired tolerance, 13-22 tons/hour (50 kg. capacity Decoupled in bags) between. ◾ Special system panel from IP54 protection class ◾ Regulation bunker weighing unit and special vibration units in unloading bunkers. ◾ Easy calibration with keypad. ◾ Height adjustable sewing machine column.

It is used for breaking and crushing wheat in flour factories. The most important machine of the flour mill, the roller mill consists of two pairs of roller balls operating in parallel. Unlike the pneumatic roller, the incoming product amount is measured with the help of a sensor or load cell. Feeding rollers change speed according to the incoming product amount and provide homogeneous flow. At the same time, the gap between the rolls is closed by pneumatic pistons and allows the product to be grinded by passing through the rolls. The bearings of the rolls are ductile iron and the arms of the rolls are conical. It is produced with gear drive and belt drive. It can also be produced with an optional touch control screen. Especially thanks to the side covers that can be opened one by one based on the opening system, it provides fast and easy access and the possibility of rapid ball removal with the cover opened on the ball.

◾ Fully PLC controlled. ◾ Precision weighing and long life with stainless steel load cells. ◾ 5/10kg.-10/25kg.and 25/50kg. weighing December. ◾ Automatic filling into bags with an open mouth. ◾ Lower and upper tolerance values that can be programmed separately. ◾ Automatic sack shaking mechanics. ◾ Separate weighing container feeding system according to the type of product to be bagged. ◾ Double coil feeding driven by separate motor. ◾ Single coil feeding driven by two-speed motor. ◾ Belt feed driven by two-speed motor. ◾ According to the product to be bagged and the desired tolerance, 13-22 tons/hour (50 kg. capacity Decoupled in bags) between. ◾ Special system panel from IP54 protection class ◾ Regulation bunker weighing unit and special vibration units in unloading bunkers. ◾ Easy calibration with keypad. ◾ Height adjustable sewing machine column.

It is used to separate heavy foreign materials such as stones, glass and metal pieces or soil pieces in the grain with the help of screening method and air. The machine consists of a fixed chassis and vibrating body. The stone separator, designed considering the difference in density of stone and grain, separates the stone by directing the grain in the direction of gravity, in the opposite direction of gravity, with the help of vibration. Wheat is separated from the stones with the help of a vibrating sieve. In addition, dust is absorbed by the air aspiration provided from the ventilation line. Apart from flour and semolina factories, it is also used in all grain factories, vegetable oil factories, cocoa and coffee processing plants.

It is utilized as a part of the flour plants to isolate any outside material that might be blended into conclusive item amid processing procedure or capacity. The remote materials isolated from item before pressing, item stockpiling or mass stacking storehouse. FEATURES - MFDJ It is utilized as a part of the flour plants to isolate any outside material that might be blended into conclusive item amid processing procedure or capacity. The remote materials isolated from item before pressing, item stockpiling or mass stacking storehouse. - MFNM - Best machine in practice. - Most economic spare parts. - Long life. - Seperation of fat with intensive operation. - Nindamac helps to achive high aqualit diffrent granulation of finished product with low fat content. For high technology degermination done by Nindamac by the

The cylindrical body structure is produced in a structure suitable for the product flow in one or both sides, depending on the project conditions, with supporting legs suitable for connecting to the floor deck or floor. The vibro feeding system connected to the conical structure has an adjustable flow flap and is driven by a vibromotor. In flour factories, it is used in the parts that require the adjustment of the ground grains at the appropriate flow and simple feeding, generally in the parts where the filter outlets need to feed a pneumatic line or a machine and where the dust wastes are brought into the system with pneumatics.

The high capacity packaging machine realizes sound and high extraction packaging. This is one of the most important machines in high-capacity factories. The capacity is up to 35-40 tons / hour.

The flow scale is ideal for mechanical conveying systems with continuous flow measurement. It is also used with vertical systems and belt conveyors. The ability to work in very small spaces due to its compact design, The ability to be easily installed, It is not affected by dust due to the measurement sensor being out of the process, Flow measurement and control during flow, flow measurement and control between 0.5-40T / S. Motor controlled feeding and integrated measurement system, dosing, flow rate control in percentage or kg / h, precise flow measurement and control with Loadcell, There is no pneumatic control in Akar scale. The system has no air dependency. The desired product mixture is made according to the values ​​entered from the flow scales placed under the wheat silos from the computer or the operator panel on the scale.

Moving through the centre, the product is transported to a horizontally positioned blade rotor. During rotation, the product is pushed against the wall of the machine and the eggs, if any, are destroyed inside the machine.

It is used for breaking and crushing wheat in flour factories. The most important machine of the flour mill, the roller mill consists of two pairs of roller balls operating in parallel. Unlike the pneumatic roller, the incoming product amount is measured with the help of a sensor or load cell. Feeding rollers change speed according to the incoming product amount and provide homogeneous flow. At the same time, the gap between the rolls is closed by pneumatic pistons and allows the product to be grinded by passing through the rolls.

Steel Structure

The pellet crusher is a crusher specially designed to break 03-5mm granules into small pieces. With this design, the quality of pellet feed and pellet feed is improved. It is mainly used for poultry and fattening pellets and aquaculture pellets. The pellet crusher has two rollers, the working distance of which can be adjusted (manually or by motor). Thanks to the specially designed abilene rollers, all kinds of grains are processed with high capacity and quality. These rollers can always be used correctly to ensure high efficiency. The roller mechanism is fed regularly by the power supply unit. The pellet is evenly distributed over the entire surface of the roller. Thanks to a regular feeding with this mechanism, a homogeneous structured feeding with a low power and a lower dust content is obtained without overloading the machine. Application Fields ◾ Mixed Feed Plants ◾ Pellet Feed Plants ◾ Grinding Units

It is used for peeling the shells of wheat, barley, rye and similar grains and for cleaning dust, sand, small seeds, husks, insects and foreign matter stuck on these grains. The grain is cleaned and peeled by means of self-friction with an intense pressure, rubbing against steel metal anchors placed on the rotor, and rubbing against the knitted fabric of a special material that is rolled out cylindrically on the braided liner suitable for abrasion. The dusts are directed out of the pores of the shirt to the dust chamber and to the outlet through the bunker. Wheat, on the other hand, is taken out by directing it to the outlet in the jacket with the angle of the anchors. Application Fields In flour and semolina factories, Cleaning facilities of wheat, rye, barley, corn and similar grains, Used in grain storage silos. The machine is driven by a belt-pulley mechanism and can be used with any air duct or a tarar.

It is used for separating garbage, straw, ear, other coarse and small foreign matter from wheat and other whole grains. In the food industry; In flour and semolina factories, seed cleaning facilities, grain cleaning and calibration facilities, grain factories, feed mills, silo facilities. In other similar industrial facilities; Low power consumption, high efficiency and high capacity Easy and minimum maintenance, trouble-free operation thanks to vibro-motor drive, Possibility to reach maximum capacity and efficiency for various grains with adjustable sieve angle, Durability and longevity Quick and easy replacement of sieves, practical cleaning possibility Quiet working

By separating the flour particles adhered to and remaining in the bran, it both prevents the loss of flour and increases the efficiency. Thanks to the special pallets on the rotor that rotates horizontally, the flour is separated from the bran while being thrown towards the screen. The centrifugal directed product strikes the pore size preselected screen. Thus, it is ensured that the flour particles are directed to the outside of the sieve and the bran to the outlet channel from the inside. Applications Fields ◾ Flour Mills ◾ Semolina Mills

This machine provides the sorting of crushed corn with speed adjustment. It makes density and size classification with vibramotor from sheets of different sizes. It separates the sticky products (bran, flour, corn...) that can be obtained from corn with the help of vacuum.

The Tube Screw Conveyor, which is used in grain, grain and food processing plants transportation equipment, is used for horizontal and vertical transportation of powdered or very thin products. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories

It transports the bagged product from one place to another, the combined belt conveyor supports the belt conveying process. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories

It is a conveyor belt system with general ease of use that can be used in any area where loading and unloading operations are performed, provides convenience in terms of occupational and worker health, minimizes damage to products. It provides convenience in stacking and storage. It can be used as highly adjustable, stationary and mobile (mobile). Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories ◾ All Transport Operations

The Conveyor used in grain, creals and food processing plants in the transport unit. Tube Conveyor is used for the horizontal transporttation of products in flour plants. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories

It is used to discharge or cut the flow of free flowing raw material or product to the desired terminal. It is used to discharge the product transported by the spiral using under the spiral to the appropriate parts. Reciprocating motion is performed by pneumatic piston or manually. The spiral is manufactured in different models according to the chain conveyor model. Two different models (pneumatic and manual) can be used at the outlets of silo and bunker with screw and chain conveyors. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories

Jet filter cleans the air dust mixture from dust, keeps the dust and ensures that the clean air is discharged from the chimney. The circular filter body first performs the cyclone system purification, and ensures that all dust particles are retained through the bags. It is used to separate the particles in the air used for aspiration and transport in flour mills from the air. Air containing dust and flour enters the machine and this dust sticks to the filter bags in the machine. First purification is carried out thanks to the centrifugal power generated in the round filter body. These filter bags are whipped with compressed air and the dust goes down to the bottom of the filter. Blower or compressor is used for this cleaning process. A bottom scraper or rotoflow is used for throwing these dusts accumulated under the machine. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants

The wing formation inside the machine feeds the product at a stable rate to the transport line. The accurate tolerance between the body and the wings prevents the pressurized air to reach the product inlet. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories

It is generally used as a dust collector, dust and air separator for the product. It is found in aspiration systems of cleaning machines. Dust removed by aspiration is separated from the air by means of a cyclone. The dust-laden carrier air is directed inside the separator thanks to the helical construction and is forced to rotate in the cyclone. Dust particles are dispersed to the environment with the effect of centrifugal forces arising due to rotation. Dust particles are carried along a helix path by means of the vortex created by the air pushed from behind. The clean air separated from the dusts goes through the suction pipe and goes to the outlet. Dust particles are directed downwards along the spiral due to the friction of the air against the wall. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories

Depending on the central control, it takes action by being set up with chain gear and ensures the transportation of the falling product. The body is made of steel. It has idler drive bearing system. It has been designed with a special tensioning device. It varies according to the desired capacities. Carrier plates are made of hardened steel. It is used wherever horizontal transportation is possible. It is used in feed, food, chemical, mining, sawdust and soil industries. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories

It is designed for separating flour particles stuck on bran and remaining in bran in flour and semolina factories. The flour and ash particles in the bran are separated and brought into the system and the efficiency is increased and efficiency is provided.