Tools fixings - Import export

Inspection tank caps male threaded, in plastic material, complete with sealing gasket and fixing flange. We supply two different types of this product: Inspection cap for Ø 124 mm hole Inspection cap for Ø 215 mm hole We can also provide them equipped with safety chain. The inspection tank caps are generally used for canopies of power generators and on tanks of agricultural machines and industrial vehicles, spray dryer, water tanks and so on. We always guarantee quality and reliability of our product over time. We perform several strength and durability tests and tests for product quality control during the various processing phases. On request we can issue the relevant certificates in compliance with national and international regulations.

Combined fixing plates in steel or galvanised steel, to be welded or directly screwed on tanks of industrial machines or generating sets. The use of this fixing plates make easier and very faster the assembling operations of our fixed mechanical level gauge in combination with our bayonet tank cap passage diameter 40 mm. Combined fixing of tank cap and fixed level indicator allows to easily monitor the liquid level in the tank during the refueling. We also supply versions of single fixing plates and fixing plates for electronic level indicators or to connect flexible fuel filling hoses of various diameters. The careful selection of raw materials and the adoption of innovative and rigorous production processes allow us to always guarantee quality and reliability of our product. We perform several strength and durability tests and tests for product quality control during the various processing phases.

Our solution is the RTL (Rotating Tool Lathe), which machines in the opposite way: the tube is fixed and the tool is rotating. It speeds up the set-up process and allows you to machine round workpieces up to OD 323 mm. The most important feature of the RTL series is accuracy. While RTL Z is capable of finishing a workpiece between IT8 and IT10, RTL ZX can achieve even better accuracy that is between IT7 and IT9.

Our solution is the RTL (Rotating Tool Lathe), which machines in the opposite way: the tube is fixed and the tool is rotating. It speeds up the set-up process and allows you to machine round workpieces up to OD 323 mm. The most important feature of the RTL series is accuracy. While RTL Z is capable of finishing a workpiece between IT8 and IT10, RTL ZX can achieve even better accuracy that is between IT7 and IT9.

Our solution is the RTL (Rotating Tool Lathe), which machines in the opposite way: the tube is fixed and the tool is rotating. It speeds up the set-up process and allows you to machine round workpieces up to OD 323 mm. The most important feature of the RTL series is accuracy. While RTL Z is capable of finishing a workpiece between IT8 and IT10, RTL ZX can achieve even better accuracy that is between IT7 and IT9.

Preformed connecting element to handle gasses, liquids with solid content, or highly abrasive solids in the suction and pressure field. Outstanding as a substitute for steel arches or steel funnels with longer service lives. Temperature resistant from –40°C to +260°C depending on the application. Construction: Special quality tube depending on the medium Tension and pressure-resistant fabric inlays UV, ozone and weather-resistant cover Interior and exterior smooth, fabric patterned optional: embedded steel rings or steel spiral optional: heat protection cover optional: antistatic version optional: wall reinforcement at bends In fixed lengths. The tooling to produce connecting elements is produced in our tooling shop according to customer drawings. Other versions and dimensions on request.

Working range Blind rivets up to 7.7 mm Ø all materials Technical data Weight: 1.85 kg Total length: 570 mm Stroke: 10 mm Accessories Nosepieces: 16/26 BT, 16/32 BT, 16/42 BT and 16/48 BT Spent mandrel container Maintenance instructions with spare parts list Jaws (3 parts): HN 2 BT

Rubber Hand Grips, Industrial Grips & Sleeves are all popular types of finishing product for use with appliances and outdoor tools/equipment such as wheelbarrows or bicycles. Produced mainly in a PVC these have excellent durability whilst maintaining performance as a handheld product, made to be comfortable and with ergonomics in mind. Our Hand Grips & Rubber sleeves come in a large number of sizes to suit all kinds of applications, being made to fit industry standard bar sizes for an easy and reliable fitting. Please visit our website for more information regarding these products along with requesting a sample or viewing prices.

PRODUCT INFORMATION CA 603 Single Corner Cleaning Machines are used for striping of bottom and top surfaces and cleaning outer corners of 90° PVC cleaning profiles. High quality stripping and cleaning operations by means of the hydro-pneumatic system Profile processing capability up to 180 mm of height Practical change of cutter provides ease of operation Fixing the workpiece firmly by means of the vertical and horizontal clamps Stops automatically after stripping and cleaning operation PLC operation system Centering system to fit the profiles properly on the setsquare Robust machine stand Pneumatic tool fixing and releasing system Stripping blade levels are adjustable according to laminated and un laminated profiles Processing capability of 2 different PVC profile 4 different cutter set can be mounted on a modul (CA 603) STANDARD ACCESSORIES Air gun OPTIONAL ACCESSORIES Corner cleaning cutters Videolar TECHNICAL SPECIFICATIONS 1200Wx 2~3 400V AC 50-60 Hz. 3000 D/dak RPM

PRODUCT INFORMATION After welding clean up down and corner sides of 90º PVC Profiles after welding. High quality stripping and cleaning operations by means of the hydro-pneumatic system Profile processing capability up to 180 mm of height Practical change of cutter provides ease of operation Fixing the workpiece firmly by means of the vertical and horizontal clamps PLC operation system Centering system to fit the profiles properly on the setsquare Robust machine stand Stripping blade levels are adjustable according to laminated and un laminated profiles Pneumatic tool fixing and releasing system Single or multi cleaning operations can be processed Automatic start up feature when profile placed on the table Stops automatically after stripping and cleaning operation STANDARD ACCESSORIES Air gun OPTIONAL ACCESSORIES Corner cleaning cutters Videolar TECHNICAL SPECIFICATIONS 1200 Wx3 400V AC 50~60 Hz 3000 D/dak RPM D: 215 d: 32 mm. 36 Lt/dak. 6~8 Bar 92x 101x 143 cm 249 kg. 198 kg.

PRODUCT INFORMATION CPM 4150 is a CNC controlled machine which is specifically designed to machine any kind of composite panels, aluminum panels up to 4 mm, flexy panels, vs. commercially available. The machine is able to process the joint grooves on composite panels that are required for bending, drilling any type of holes, dimensioning the panels according to required sizes, etc. Equipped with the manual vacuum control system concentrating the suction on the required area 3 axis CNC automation system Solid steel construction of the body and dynamic performance Application of special cutting processes with YILMAZCAM software Z axis heat compensation system that adjusts the Z position of the cutter bit automatically considering to the elongation on the spindle because of the thermal changes.(Patented) High precision HSD spindle and internationally recognized components Minimum tool change time with 6 station automatic tool changer fixed on the gantry

To fit leveling feet to round, non-threaded tubes or to fit levelling feet to profiles at right angles Threaded plug/threaded bush: To accommodate adjustable feet on the end face of square tubes or round tubes. Threaded sleeve: To accommodate adjustable feet at right angles to the profile; a hole must be drilled with Ø 17 mm through the profile to allow application Threaded plug/sleeve: Material: : PA plastic, glass-fibre reinforced / threaded insert: nickel-plated brass Colour: black, silver Extras: conductive, other sizes, other colours on request Threaded sleeve: Material: steel Colour: silver Extras: further sizes and surfaces on request

T-slot feet — to protect the floor and the aluminium profile — can also be used as spacers, e.g. when transporting aluminium profiles and frames — or as a buffer stop, e.g. for door frames incl. anti-slip-plate, prevents movement of T-Slot foot on slippery surfaces and absorbs some vibration can be mounted into the slot by a quarter turn Profile: 20, 30, 40 Profile slot: 5, 6, 8, 10 Material: Plate: PA plastic, glass ball reinforced Anti-slip plate: thermoplastic elastomer, ≈70 Shore A Color: black

Flexible leveling feet Swiveling, leveling adjustable feet to compensate for uneven floors Swivel range : ± 4 ° to 20°. Adjustable foot plate: different shapes possible from diameter 20 mm to 120 mm Material: plastic PA (also ESD-capable possible) / zinc die-cast / stainless steel Color: black / bright, other colors on request Optionally with anti-slip plate: prevents adjustable feet from slipping on smooth industrial floors and can dampen vibrations Fastening to the floor with different versions: Optionally with screw holes in the plate Plate with extende base Base plate for safe subsequent mounting threaded rod: Material: steel / stainless steel Surface: galvanized / bright Alternative: ball head with internal thread Optionally with lock nut Translated with www.DeepL.com/Translator (free version)

Automatic or manual cable tie fixing tool for stainless steel cable ties

Keytracker’s Magnetic Block Systems are a simple key storage and vehicle identification solution, ideally suited to vehicle repair outlets, easily identifying the vehicle in a crowded yard or storage area The Block System includes: 1 Magnetic Block Control Board and 20 coloured and numbered Magnetic Blocks

The brightly coloured magnetic blocks are triangular shaped and fitted with powerful magnets inside the fixed non-scratch rubber bases to ensure adhesion to the roof of the vehicle Sold individually or as a set.

With the risk of loss or theft, health & safety issues and finding access to safe and protected storage points, our small item lockers have been specifically designed to help overcome these issues and provide a secure, easy and safe solution for key drop-off and collection. The digital keypad locks fitted to each door have a shared-use function, where a single-use code can be used to lock and unlock keys securely inside, which allows you to create a contactless key drop off and collection solution.

The Keytracker key drop box is designed to stand alone as a secure post box The fisher proof internal construction ensures retrieval is only possible from the safe area at the base The unit must be secured in concrete with suitable floor bolts.

Ideal if the board needs to be moved throughout the day from location to location or to be locked in a safe overnight The Keytracker key drop box can be mounted to the wall The horizontal unit is designed to stand alone as a secure post box The medium chute is suitable for walls between 185mm and 300mm thick This will accept items measuring up to 130mm x 50mm x 40mm The faceplate measures 224mm (W) x 160mm (H) and is angled at 45 degrees The drop box which is attached to the chute above is fitted on the inside of the wall/building and the dimensions are 445mm (H) x 205mm (W) x 185mm (D). This is 1.2mm thick steel and has heavy-duty hinges.

A simple Peg-in,Peg-out board solution for managing keys Designed to prevent the loss and unprohibited access to your keys Issuing all authorised users with personalised “access pegs”, guarantees that when a set of keys is removed from the cabinet, the exact identity of the person who removed them is obvious at a glance Comes with a complete set of Retention Pegs, seal cutters and a number of Access pegs (dependent on board size) Enter Access peg into the desired numbered hole to release retention peg with your attached key.

A simple solution for strong, securing and tracking a harness, tool, single key bunch or any equipment Any item can be secured using one of the range of security seals, up to 1 metre (once security seals have been broken, they cannot be reopened to eliminate tampering; staff must use their unique access peg to release the item Pre-moulded fixing points

The Keytracker Metal Retention Peg can be used to increase security and peace of mind. Made out of solid stainless steel, these retention pegs are for heavy-duty industrial areas For example, these pegs can be used when managing and controlling ladders with the Keytracker Single T1 units These pegs are detectable in controlled environments.

Made out of solid stainless steel to access the detectable metal retention pegs Perfect for heavy-duty industrial areas Also available for food operations Available in light blue only Please note that the Metal Detectable Access Pegs are available in flat end

Reinforced plastic pegs with a rounded end for holding keys into the Mechanical or KT Smart System Keys or equipment are secured to the peg using anti-tamper seals or cable seals Additional and replacement pegs are available on next day delivery if ordered before 12 noon excluding Saturday delivery. The new vibrant colours available are: yellow, white, red, green, light blue, dark blue, orange, mint green, silver.

Reinforced plastic pegs with a cog end and extended tip for the releasing of retention pegs You may include engraving for up to 3 letters or digits Replacement pegs are available on next day delivery if ordered before 12 noon excluding Saturday delivery.

Reinforced plastic pegs with a cog end for releasing retention pegs, compatible with the Peg-in, Peg-out Boards You may include engravings for up to 3 letters or digits. Please note that the Flat End Access Peg will work in the same way as the Original and Standard Access Pegs. Replacement pegs are available on next day delivery if ordered before 12 noon excluding Saturday delivery.

Our RFID technology can be fitted to any existing or new airlock area. Concealed within walls or ceiling panels, all RFID components will be invisible to the user. Every time the room is entered the RFID scanners will scan the room for RFID tags. The date, time, user and items they are carrying will be logged into a fully accessible audit trail.