Tensioners - Import export

Load cell model 8417 measures the tension or compression force between both axially mounted metric exterior threads on the cylindrical sensor housing. Forces are only applied to the threadings, which are especially long, to accommodate counter nuts and must not be affected by external influences such as bending, lateral force or torsion. Any contact with units affixed to the sensor housing - even on the front - must be avoided. The measurement element is a membrane perpendicular to the axis of the sensor with a strain gage full bridge applied to the inner surface, which requires stable excitation with a rated value of approx. 1 mV/V. The connection cable is led radially out of the housing through a sleeve which is used for strain relief. FEATURES: —Measuring ranges from 0 ... 10 N to 0 ... 5 kN —Very small dimensions —Made of stainless steel —Rugged construction —Simple screw mounting —burster TEDS optionally available

These models are among our most precise and yet mechanically robust miniature load cells. High accuracy, finely graded measuring ranges, small dimensions and the simple introduction of force via opposing threaded pins open up a wide scope of laboratory and production applications. Their sophisticated engineering with integrated support membranes and overload protection reduces additional design expense in many applications, e.g. for external overload protection or guiding the parts introducing force to the cell. The result is that less space is required, less material is used and less weight is involved. Last but not least, there is hardly any friction on components that could falsify the measurement result. The force to be measured is introduced centrally and axially to the cylindrical sensor body in the tension or compression direction by means of the two threaded pins. This requires the sensor to be mounted without any elements touching the end faces of the sensor housing.

This, related to its measuring range, miniaturized load cell enables an universal and reliable operation in industries and laboratories. It is well suited for compression measurements in very restricted structures. The load cell is a compact construction and made of superrefined steel. Therefore it can be used in many fields of industry, like. Examples are: — Press-in force measurements on longitudinal and transversal connections — Compression force measurements on punch and roller applicancy — Spring tension measurements on shock absorbers for cars — Contact pressure determination in push rods — Compression force measurements on compressed-air knee-lever presses Thanks to the rounded top, in shape of a little hat, the force to be measured is led into the sensor centrically and free of lateral force. Specific characteristics: Very small dimensions Drug chain qualified cable Made of stainless steel burster TEDS optionally available

The measuring element of the load cell consists of a double bending beam on which strain gages are applied. The applied force detunes the measuring bridge so that a proportional output voltage is generated. The strain gages on the measuring element are protected against dirt and water spray by a rubber bellows. The sensor can be easily mounted via two mounting holes. The tension or compression force to be measured is introduced at the opposite end perpendicular to the sensor axis. Due to its special design, the influence by an extension (e.g. touch finger) on the measuring signal is low. Overload protection can be realized with little effort using a mechanical stop. FEATURES For tension and compression forces Measuring ranges from 0 ... 5 N to 0 ... 2 kN Relative non-linearity: ≤ ±0.1 % F.S. Very low mounting height Simple force application Material aluminium or stainless steel Special design on request burster TEDS optionally available

This miniature force sensor was optimised with respect to its height and is, at only 3.4 mm, the lowest known sensor with strain gage technology. Hardly higher than the diameter of its connection cable, it can also be housed in conditions where space is limited. Along with its minimal geometry, the force sensor is also particularly light. It has a high resonance frequency to follow quickly changing load alternations. Despite its extreme miniaturisation, in its application it remains completely robust and suitable for industry, not only with regard to the highly flexible cable connections or the full welding of sensors for the measurement ranges ≥ 0 … 10 N. The miniature compression force sensors are flat, cylindrical discs with covered bottoms. The central load application button for taking on compression forces is an integrated part of the top, which is the sensor‘s membrane.

The sensor element consists of a double bending beam with applied strain gages. Changes in the ohmic resistance of the strain gage fullbridge caused by applied forces are converted into electrical voltages. The precise value (characteristic value) of the output voltage, resulting from the application of a rated force to the sensor, is specified in the accompanying calibration protocol. The sensor has to be mounted by two screws on the cable side. The opposite side is meant to receive applied forces (loads). Once the rated stress or strain is exceeded by 20 %, further deflection of the bending beam is prevented by an integrated, mechanical stop. This protects the sensor element against permanent deformation.

The tension and compression load cell model 8435 enables universal and fast installation, requires hardly any installation space and upgrades with technical data that are readily achieved by larger sensors. Due to its excellent price-performance ratio with regard to its mechanical and electrical data, the force sensor finds its place in products that are also manufactured in larger quantities and calculated with a small budget. This model of load cell uses proven strain gage technology to perform measurements. Strain gages are applied to the sensitive element and connected to form a full bridge. FEATURES Measuring ranges from 0 ... 200 N up to 0 ... 5000 N Small dimensions Inexpensive execution Stable anti-kink protection Made of high quality stainless steel Connecting cable suitable for drag chains burster TEDS optionally available

The tension & compression load cells from the 8523 series are designed for a wide range of uses. The sensors feature many benefits, including three point-contact mounts for tilt-free installation. Thanks to this feature, excellent measurement results can be achieved even with a sub-optimum mounting surface. The force to be measured is applied to the central threaded hole in the tension or compression direction. For measuring purely compressive loads, using load buttons from our accessories range saves the need for complex sensor-integration mechanisms. Tensile loads in rods or chains can also be detected with ease using the optional pull plate. Inside the sensor is an elastic membrane, on which are applied strain gages connected in a full Wheatstone bridge. FEATURES Measuring ranges from 0 ... 20 N to 0 ... 5 kN Tilt-free installation thanks to point-contact mounts Excellent price/performance ratio Easy mounting burster TEDS optionally available

Thanks to its compact shape and three fixing holes on its underside, the 8526 compression load cell can be used in a variety of applications. With its wide choice of measuring ranges from 0 ... 100 N up to 0 ... 1 MN, it really can cover a wealth of measurement tasks, from the laboratory to use in heavy industry. The integral load button provides an easy and reliable means of applying the force to be measured. Angle errors in the load application with a deviation from the measurement axis of up to 3° have only a minor influence on the measurement signal. For ideal measurement accuracy, the load cell should be mounted on a surface that has been ground and has a hardness of at least 60 HRC. The model 8526 load cell is designed with an internal elastic membrane, to which strain gages are attached. When a compressive load is applied to the load cell, the membrane is elastically deformed and transfers its tension to the strain gages.

The 8524 precision tension & compression load cell is a versatile sensor for highly accurate load measurements in diverse applications. Optimum measurement quality is achieved with the load cell mounted on a flat, hard and polished contact surface. This requirement does not apply to small measurement ranges of up to 0 ... 2 kN because three knife-edge bearings ensure that the sensor is seated securely. Our brochure „Load Cells“ explains how you can design parasitic loads out of your mechanical system. Through-holes in the outer flange are used for fastening the 8524 sensor to the system structure. The load is applied via the central blind threaded hole or optionally via a load button. Alternatively, a pull plate and even rod end bearings, if desired, can be attached to the sensor for equally easy measurement of purely tensile loads, for instance in Bowden cables or chains. The 8524 sensor is designed to measure static, quasi-static and dynamic compressive and/or tensile loads.

The model 8527 high-precision compression load cell is the ideal load cell for reference measurement chains where highly precise measurement results are required. Its very high production quality and extremely low non-linearity of just 0.035 % F.S. make it a dependable choice for comparative measurements and calibration tasks. Designed for a dynamic stress of up to 100 % of the full scale value, the model 8527 load cell is also suitable for situations where a rapid signal change with high amplitude occurs and has to be measured. The model 8527 high-precision compression load cell has a domed load button on top, onto which the compressive load being measured is applied. Inside the load cell is an elastic membrane, on which strain gages generate a resistance change in the measuring bridge and an output signal proportional to the load. For the best possible measurement results, the force should be applied axially and centrically to the load button.

This low cost tension/compression load cell is an especially robust component, which can be easily integrated in a girder assembly between two cables or chains for measuring force. The standard model comes with internal thread, allowing any adapter parts, for instance eye brackets, to be fitted in the axis of symmetry. Alternatively, the optionally available adapters with external thread can be used for quick and easy screw-fitting into a threaded hole made for the purpose. The radial connection cable is extremely flexible and designed for a wide range of motion. In order to achieve the greatest possible stability for such a small sensor, making it suitable not only for the laboratory but also for industrial use, all parts have been welded together including the cable guide bush in the sensor housing. burster TEDS with an electronic sensor datasheet or standardization of the output signal in the sensor connecting cable are offered as options

Test Method Hold the TensION at a distance from the ionising points / emitters. If a high voltage is present, a red indicator in the plastic tip will illuminate. To get an indication of proper functioning of the Simco-Ion equipment all the emitters should be checked. Minimum distance from the TensION to the ionising emitters or charging points must be obtained. Refer to the table below: Test Method Hold the TensION at a distance from the ionising points / emitters. If a high voltage is present, a red indicator in the plastic tip will illuminate. To get an indication of proper functioning of the Simco-Ion equipment all the emitters should be checked. Minimum distance from the TensION to the ionising emitters or charging points must be obtained. Refer to the table below: Features - Convenient high-voltage indicator in pen size - There is no need to make contact with the device being controlled - The tip of the TensION illuminates when a voltage is detected

Discover our range of Wear strips and tensioner components for combine harvester and many other combine harvester parts on www.landa-partscenter.com. Landa offers a range of agricultural parts for forage harvesters, combine harvesters, balers, mower-conditioners, windrowers and tedders. We develop wear parts for harvesting machines that are equivalent to original manufacturer parts, in partnership with industrial companies specialising in the fields of metallurgy (assembly, machining, forming). Our range of spare parts is multi-brand: CLAAS, JOHN DEERE, NEW HOLLAND, KHUN, KRONE, FENDT etc. We work with well-known brands such as: GATES, OPTIBELT, NSK, NTN, TIMKEN, SCHAEFFLER, IWIS, DIAMOND, DONALSON, FLEETGUARD, MANN FILTER, SCHUMACHER, etc.

Most common ends are different types of end loops and hooks, there are also a wide range of other mechanical attachment possibilities such as coiled in and screwed in attachments. Examples are, half hooks, German loops, English loops, extended hooks, side hooks, side loops, screw plugs and screw shackles.

Other threads, screw lengths and special versions. Dimensions “H1” and “A” available in other lengths at extra charge.

Tension levers can be used for simple clamping or control operations. Where applicable, there must be enough space available so that the grip can be rotated 360°. On request: Other internal threads, reamed holes and special versions. Dimension “A” available in other lengths at extra charge.

R410A is the favored refrigerant used in private and business climate control systems in the United States, Canada, Europe, and Japan. It was created as a harmless ecosystem swap for R22, which was considered a supporter of ozone-depleting substances. Most present-day forced air systems to decide on R410A refrigerant, which permits frameworks to work and higher tensions versus R22. For installers and HVAC experts, most will require particular apparatuses and gear to work with R410A, for instance, connectors and fittings, for vacuum siphons. Starting in 2010, R22 isn’t allowed in the United States or Canada and has been supplanted by R410A refrigerant, a more proficient and eco-accommodating refrigerant. R-410A is a without chlorine refrigerant that meets the U.S. EPA’s freshest, most strict ecological rules. R-410A was created as an option in contrast to R-22 (Freon), which will be deliberately eliminated throughout the next few years in light of global natural worries.

The tension meter is used to perform a pretension test on commercially available belt systems quickly and easily by means of frequency measurement. Fully electronic and equipped with stateoftheart microprocessor technology, the meter enables precise adjustment of all V, toothed and flat belts that have to be tensioned in the range from 10 to 600 Hz. The measurement must never be performed while the drive is running The meter is not permitted or certified for use in potentially explosive areas.

Housing 1.4308 stainless steel, from size 5 1.4301. Clamping arm 1.4301 stainless steel. Buffer natural rubber. Screw stainless steel A2. Version Housing and lever arm bright. Screw ISO 4017, grade 70, bright. Note Clamping element with integrated highly elastic, shaperetaining natural rubber buffer. Together with a chain tensioner set, sprocket set or a tension pulley, the clamping element makes a readytoinstall tensioning unit suitable for tensioning chain and belt drives. Suitable for both tensioning directions. The clamping elements are maintenancefree and tearoff resistant. The clamping element is fastened to the machine component through a bore. If necessary, a heavyduty dowel pin can be inserted in the positioning notch “P” for torque support.

Item No.: 916070 Tensioning cord Specification Tensioning cord Braided elastic cord, with press-fitted metal crown Model type: C (Customised) Dimension: Diameter approx. 5.5 mm Material: Polypropylene Colour: beige Property: elastic Packaging: loose in cardboard box Note Features: Press-fitted metal cap

Cylindrical pullback springs are made with coils close to each other. At both ends of a spring, eyelets are bent up or screwed in. There are many factors which may have an influence on the shape of a spring and an eyelet. We advise and help you to find a suitable spring.

Tensioner Vesconite® plastic. Screw and nut steel. Version Screw ISO 4017, grade 8.8, electro zincplated. Nut ISO 4035, grade 8, electro zincplated. Note For tensioning roller chains. The chain tensioner set can be combined with all tensioning elements to form a readytoinstall chain clamp. The symmetrical design enables use on both sides. Large radii ensure very quiet running. The highquality plastic does not require any lubrication. The maximum chain speed should not exceed 1.5 m/s in continuous use.

Special eye forms for extension springs: There is an increasing number of potential applications for trumpet-end springs and mounting aids for extension springs – a solution that we have been addressing for many years now. We produce our range of extension springs with German and British standard eyes with wire diameters of 0.25 mm to 4.00 mm. We can also produce special-purpose eyes and other eye forms as needed according to alternative specifications with wire diameters of 0.20 to 4.00 mm.

Item No.: 6913-15 Tensioning cord Specification Tensioning cord Braided elastic, flame-retardant finish, with press-fitted toggles Model type: C (Customised) Dimension: approx. 4 x 230 mm Material: Polyester Colour: black Property: elastic Packaging: loose in cardboard box

The measuring element of this load cell consists of a double bending beam with strain gauges, the resistance of which changes with the application of force. Upon applying a voltage to the strain gauge bridge, the change in the strain gauge resistance is converted into output voltage, which is directly proportional to the force. The strain gauges and the entire measuring element are protected from water spray by metal cover including sealing material. The tensile or compressive load to be measured is applied to the sensor element through the M6 threaded hole located on each end face. The load can be applied easily, along the sensor axis. This serves to prevent falsification of the measured values. Overload protection can be realized with little effort using a mechanical stop. FEATURES Measuring ranges from 0 … 20 N to 0 … 880 N Relative non-linearity: ±0.25 % F.S. Many load cycles Protection class IP54 Excellent price-performance ratio burster TEDS optionally available

The woven strap is widely used when you need to tie and secure the products by means of ligatures that are not constituted by iron or plastic strap. Woven strap features: - Excellent tension maintenance. - Perfect elasticity in case of shock. - No conjunctions. - It ensures minimum wastage. - Perfect winding. For the ligation you need a tensioner, the strapping band, the buckles and a strap-holder trolley to prevent strap damage. Different types of straps, more professional strapping tools and various types of trolleys are available on request.

Pneumatic tensioner model FP CORD for tensioning and cutting of polyester strap textile and composite. Equipped with high tension force (7500 N) allows the use of strap widths up to 32 mm. By acting on the supply pressure it is possible to adjust the tension. The built-in knife allows cutting the strap easily and without waste of material. The holding capacity of strap depends on material type to strap and on strap choice.

The operator wrap the product with the strap, put the two ends through the buckle and places into the strapping tool. The first end is locked with the brake while the second is placed under the cutter and inside the tension roller. Increasing the tension of the strap, the buckle keeps the tension. After reaching the desired tension the strap is cut automatically by the tensioning device.