Soldering machines - Import export

TIG welding machine that combines robust industrial construction with excellent arc . Excellent arc performance - perfect HF ignition, stable, focused and fast arc (for pulsed and non-pulsed arc). Simple control panel - full control, easy configuration. Energy efficiency - PFC circuit, high efficiency, green mode. Portable - Small, lightweight PFC, 16A protection, 100m input cable, prepared for generator.

Powerful and compact, great for MIG welding The Powertec 305C was designed around the need to satisfy our customers' demand for robust and robust compact MIG welders. Built as a true all-rounder, ideal for both thin sheet metal applications and light to medium construction work . Excellent start-up performance. Multi-step voltage knobs for precise adjustment. Excellent drive system with transmission roller Electronic feedback system on the wire drive ensures a constant wire feed speed. Equipped with large diameter wheels, push/pull bar and lifting eyes for total manoeuvrability. Meets IEC974-1, ROHS and CE standards for safety and reliability.

SMART, COMPACT MULTI-PROCESS Lincoln Electric's Weld Pak 2000 is a complete multi-process continuous voltage arc welding machine ideal for welding thin sheets and repair and maintenance work. This machine is a perfect tool for light steel applications and is mobile, meaning the operator can easily move this MIG welding machine to any location in the workshop. Weld Pak 2000 is recommended for MIG/MAG applications, for arc welding with Innershield gas-free flux-cored core and applications with Rutile and Basic electrodes. This machine is designed to feed wire from 0.6 mm to 1.1 mm (steel, stainless steel and flux cored) on B300 and S200 coils. High quality welding performance that depends on a quality wire drive system. Lincoln Electric has equipped the Weld PAK with a professional feeder with large rollers. The Weld Pak 2000 is designed to meet Lincoln performance and reliability standards. : Compact design with a standard

If you want to explore MIG welding, Lincoln Electric's Handy MIG® machine is your ideal solution. Designed for flexibility and simplicity, this MIG welding machine is notable for its portability and ease of use, connecting to a 230V, 20 amp power source. Equipped with four voltage settings and a system for continuously adjusting the wire feed speed, the Handy MIG® is capable of welding mild steel from thin thicknesses up to 3.2 mm. The equipment is supplied almost ready to use, including almost all the accessories necessary to start MIG welding: a torch with mounted cable, an earth cable with clamp, a gas nozzle, a gas regulator with hose, a wire coil solid, contact tips, and a protective mask with filter plate and lens. You just need to add a shielding gas cylinder. Additionally, it includes a coil of self-shielded flux-cored wire, additional contact tips and a hammer with cleaning brush, expanding the functionality of the Handy MIG® for welding with and without gas.

The Invertec 150S is suitable for a variety of applications and working environments. Its design was focused on providing excellent welding and starting behavior in a robust and reliable package. It is equipped with a unique set of features and capabilities to ensure perfect welding for your application. Robust and robust on the one hand, portable on the other, the Invertec 150S is light and easy to handle in any situation. Rugged Design – Unique rubber corners, metal casing and control buttons to withstand harsh environmental conditions. Premium Arch – Lincoln 's advanced technology and know-how guarantee performance every time. Power Surplus – Additional power for superior arc control. Soft and Crisp Mode – Selectable arc modes for different electrode types Self-adaptive arc force – For a stable arc with low spatter levels as standard. Integrated “Hot Start” for stable arc with lower splash level. Long cables: primary power extension cables up to 60 m.

Discover the BesterMIG 200-S Inverter, a technological innovation that will radically change your approach to welding. Synergy technology transforms welding by automatically adjusting parameters . With Synergy, the difficulties of determining the ideal current, wire feed speed and correct material thickness are a thing of the past. This adaptive technology assists your welding needs, ensuring remarkable results with minimal effort. By reducing the margin for error, Synergy offers high quality welds with reduced costs. Increase your efficiency and productivity with automatic adjustments that save time and facilitate the welding process. Portable and compact multi-process equipment: MIG/MAG, FCAW, MMA and TIG Lift. Equipped with SYNERGY based on automatic selection of welding parameters Perfect solution for hobbyists and DIY enthusiasts: makes welding faster and more effective

It is a type of machine that is light, compact and easy to transport, it has the Anti-Stick function that prevents the electrode from sticking. Continuous dimming simplifies the current setup process. Furthermore, it is a powerful machine and can be used with electrodes between 1.6 - 4 mm. It works in a regulation field between 10 - 160 A. Its features also include: Hot Start (reduces the risk of sticking when the electrode and workpiece are cold, also facilitates priming and penetration) and Arc Force (keeps the intensity constant regardless of the arc length).

Input current at nominal output kW to duty cycle - 1.7 kW at 100% - 2.4 kW at 60% - 4.0 kW at 25% Input voltage 230 V 15% single phase Frequency 50/60Hz Welding current range 10-150A** Maximum open circuit voltage 90 Vdc Fuse (delayed action) or Circuit Breaker (characteristic D) AmP. 16A Input current cable 3 x 1.5mm2 Plug type (included with the machine) 16A / 250V Height x Width x Length (mm) 205 x 130 x 300 Weight (kg) 4.2 Type of metals able to weld: Steel cast iron stainless steel

As a complement or an alternative to wave, mini-wave and traditional selective soldering techniques, the MPS700 bottom side selective soldering machine provides maximum accessibility and meets mass production requirements of quality, reliability and cycle times. The iron head is equipped with a powerful heating element and a high precision wire feeder. The solder point positions are adjusted using a compact vision system close to the iron head. A 4-axis system guarantees quick and precise movements. The MPS700 can be equipped with mta classic soldering iron head and MSH150 soldering iron head.

Whether an individual circuit board or full-scale, demanding device assembly – PRUFREX will manufacture your products to your individual specifications and quality guidelines. Component placement requires individual approaches. Our range of solutions covers small series produced by hand, medium-size series using semi-automated wave soldering machines and fully automated production lines for large-scale manufacture. We adjust the level of assembly automation to your project – so that you achieve the best result both economically and technically.

Lubrication of slow-running rolling and friction bearings, rollers, transport chains or sliding surfaces on kiln trolleys, bakery machines, drying tunnels, foundry machines, boiler firing systems, plastics processing machines for welding and soldering machines etc. Advantages and benefits Highly effective due to optimum temperature-stable silicone grease formula Excellently suited for grease lubricating points subject to high-temperature loading Broad range of uses outside normal grease performance areas

Epoxy fibre-glass FR4 1.50 mm Single-sided 35 µm Cu Without holes Hot air leveling (HAL-leadfree) with solder stop mask Component print PCB for solder practices for SMD Fine-Pitch QFP 208 QFP 208 4 x For manual soldering and very suitable for machine assembly (Pick & Place) Size 100 x 140 mm

Cable harnesses, toroidal transformers, coils, chokes, connecting cabling and other components from the field of electrical engineering are our main activity. During their production, we perform micro-soldering, tinning, winding using winding machines – vertical and horizontal, assembly of joints, connections and more.

D-SUB Connectors – also known as D-Subminiatur or Sub-D connectors – are used in nearly all application markets, from control and measuring to telecommunications and computer applications. D-SUB connectors take their name from their characteristic D-shaped shell, which protects both sides of the connector from mechanical and electromagnetic interference CONEC D-SUB connectors are available in five standardized housing sizes in the variants D-SUB Standard, D-SUB High Density, D-SUB Filter, D-SUB Combination, D-SUB Filter Combination and D-SUB hoods. The combination of different contact types provides opportunities to save installation space and costs in the interface area. The CONEC Snaplock mounting type is offered as a quick-connect system for common pole numbers. Depending on the mounting type and number of poles, a choice can be made between crimp, wire-wrap, solder pin, solder cup and insulation displacement terminal connection types.

D-SUB Standard, Solder pin – Angled, .370" 9.4 mm, Precision machined contacts, Metal bracket Mounting styles: — with mounting bracket and 4-40 UNC or M3 threaded insert — with mounting bracket, PCB clip and 4-40 UNC or M3 threaded insert — Quality class 3 (also available in quality class 1) — Shell: Steel tin plated (brass tin plated or stainless steel available on request)

Manual composition for soldering. Those machined parts are for automotive industry. Quick respond is our advantage and one of attribute our partners regards most. Especially when they urgently need a spare part. We specialize in CNC processing of small to medium series of milling parts (1 – app. 5000 pieces). Our main activity is production of individual custom components, from less demanding to very demanding and complex ones. Dimensions of flat workpieces can be up to 860 x 500 mm. Specialized in smaller productions has its own advantages. We individually devote ourselves to our partners. We do our best to ensure that the services are provided with quality and in the shortest possible time. We support you by having more than 3 tons of material in stock, which guarantees us an immediate start of production. Which results in shorter delivery times and immediately providing you a new spare part.

made of 100% Nonwoven PP material, with continuous filament 80 g/m² economic low lint wipe high water absorbency rate, lowlint and soft texture good water and oil absorbency suitable for cleaning of e.g. PCB solder paste, tools, machines, etc.

Suitable for every order size: SMD assembly is one of our core competencies Our SMD assembly is characterized by modern production standards and a low error rate. Stencil printers and a jet printer are available in front of our three production lines. This means that we are as flexible as possible when preparing your project. The SMD components are precisely applied in our pick and place machines and soldered in reflow ovens, or in special cases also in our vapor phase. A highlight: We have a hybrid assembly machine, the FUJI 7x NXT2. This is our way to work with the greatest precision, quickly and safely. What speaks for us: -Your Contact person for prototypes, large or small series -A high mix of components is not a problem -We test the technical feasibility of your project before each order -We are not just a service provider, but a technology partner: A+B Electronic thinks through your project with you and together we can bring it to successful series production

The EPC VM is our measuring device for monitoring O2/CO2 in packaging machines. In addition to continuous measurement of the gas atmosphere, spot measurement of individual packages is also possible. The functionality is the same as with our Zr-Ox EPC spot analyser. Once set, the analyser can also control the gassing of the machine. Advantages - Over 20 years of experience in development and optimisation - Top response time and short heat-up phase - Two different sizes for added flexibility - Long average life components - Digital measurement data logging - User-friendly filter change - 5.7 inch touch screen - Intuitive menu navigation - in many languages - Various RS232 protocols that can be changed in the unit for communication with different soldering, packaging soldering, packaging machines, analysers or other equipment and processes - Operation for user and administrator in different levels

The Zr-Ox EPC is our standard model for continuous monitoring of residual oxygen. Advantages - Over 20 years of experience in development and optimisation - Top response time and short heat-up phase - Two different sizes for added flexibility - Long average life components - Digital measurement data logging - User-friendly filter change - 5.7 inch touch screen - Intuitive menu navigation - in many languages - Various RS232 protocols that can be changed in the unit for communication with different soldering, packaging soldering, packaging machines, analysers or other equipment and processes - Operation for user and administrator in different levels - Standardised 0/2-5/10 VDC or 00/04-20 mA analogue signal adjustable - 3 backups for storing different unit functions and settings - Display of all alarms and errors