Sensor manufacturer - Import export

In addition to certain standard productions, Occupancy Sensor is successfully manufactured by us in different ways.

We at TFP use our special wire and fiber laying technology to create sensors for large dimensions to measure pressure, humidity and monitor structural composite parts. Please contact us for further information.

With our CNC-wire-laying technology is it very easy to integrate functions like heaters for Anti-Icing/De-Icing or surface sensors for detections of structural problems in carbon or glass fiber parts. We can manufacture dimensions up to 2500x8000mm.

Compact Interchangeable Head Digital Torque Wrench. Tohnichi’s smallest digital torque wrench. The optional Bluetooth® module makes it easy to manage data on a computer or other device. Equipped with a high-luminance LED. Permits confirmation of current tightening condition and pass/fail judgements from a wide range of angles. The high-luminance LED is especially useful in dark working conditions. For tightening and inspection work in low torque ranges, such as cable grounding, and plastic or ceramic screws/bolts. Useful in confined spaces and height-restricted locations where tightening with a torque screwdriver or conventional torque wrench is difficult. For tightening work involving fragile apparatus, such as sensors and semiconductor manufacturing equipment. Applications For tightening and inspection work in low torque ranges, such as cable grounding, and plastic or ceramic screws/bolts. [...]

In the pursuit of advancing technology, various sensors undergo rigorous testing at power plants managed by ESCOM Power Plants Engineering Services. The ESCOM Enhanced Solutions R&D center is at the heart of this innovation, spearheading the design, development, and manufacturing of these sensors. LiTeM stands as a testament to ESCOM-ES's commitment to innovation and functionality, having been meticulously assembled and tested at one of the renowned power plants. The test results affirm LiTeM's superior efficiency, marking it as a revolutionary development specifically crafted to enhance the performance and safety of internal combustion engines.

Sensors are often installed in difficult-read positions. The GIA 0420-M12 plug-in display from the GHM GROUP can be turned in all viewing directions to enable readings of critical measurements directly at the location. Sensor manufacturers, plant builders and operators benefit from a flexible display device that can be installed even more easily with the worldwide standard M12 plug connection.

Measurement and control In this sector, MPT represents the interests and products of WALCHEM Corporation in Holliston, Massachusetts (USA). WALCHEM is a leading manufacturer of sensor technology and controllers for the surface technology and for the water treatment technology, including pH-, redox and conductivity controllers as well as special controllers for the cooling-water and boiler water conditioning. Besides the measuring transducer, these controllers include also a control program, adapted to the respective application. Monitoring, alarming – control and telecontrol systems By default, WALCHEM’s WebMaster has available sensors and data amplifiers for various physical parameters. Using the integrated program the parameters can be linked to each other and to control parameters. Via telephone modem and Ethernet board the user is provided with information such as alarm messages and off-limit conditions worldwide.  Measuring and control technology for dosing liquid media in

NCS-TT105 Temperature Transmitter adopts fieldbus technology, is a new generation of fieldbus smart temperature transmitter, and is an indispensable field device in process control. NCS-TT105 smart temperature transmitter supports HART, FF, PA protocol and can be widely used in petroleum, chemical, power plant, metallurgy and other industries. NCS-TT105 Smart Temperature Transmitter： 1. Support the latest versions of FF H1, PROFIBUS PA and HART protocols 2. Support 6 types of thermal resistance and 8 types of thermocouple 3. Thermal resistance supports 2-wire, 3-wire and 4-wire 4. The cold end compensation accuracy of thermocouple is ± 1.0℃ 5. High precision (better than grade 0.1), low temperature drift (better than ± 50ppm/℃)

Compur Statox 502 Control - and Common Alarm Module The All – Rounder in Gas Detection No matter if you want to detect toxic or combustible gases: This control module works with any sensor head. It provides the power supply and processes the signal. Three highly rated relays and a 4 – 20 mA output are the interfaces to peripheral instrumentation. Potential front ends may be the Statox 501 or Statox 505 transmitters with electrochemical or infrared sensors, or sensor heads with a Wheatstone bridge signal such as Statox 501 PID, catalytic or the Statox 501 LC and MC series with infrared sensors. Just by the push of a button you can program the module to handle 4 – 20 mA sink or source. Even the bridge voltage can be set to any value between 2 and 5.2 V, it even works with sensor heads of other manufacturers. So there is no restriction at all when selecting the appropriate sensor head for you application. With its two “sense” lines it can even compensate the voltage drop in the cable for very remote sensor heads or if there are extreme temperature variations. For maximum flexibility the measuring range is user programmable. You can also select the unit, no matter if it is ppb, ppm, % LEL or % volume. Easy installation The control module is mounted on a standard DIN rail. With an optional power rail you can interface the 24 V DC power and the alarm signals. This way you can program one of the modules to operate as a common alarm module. Even this function can be programmed just by push button. The application of a control module as a common alarm module is a very useful feature. It displays when any of the modules goes into Alarm 1, 2 or system alarm, and controls peripheral alarm devices. All electrical contacts are located easily accessible on the front side. The terminals for alarm signals, analog output, sensor head connection run into 6 pluggable terminal blocks. This makes not only the first installation quick and easy, but also any service event or system modification. A module can easily be removed out of its row, without interrupting its neighbors or disconnecting wires. Intuitive User Interface You want a gas detection system that needs little or no attention. No matter if setting the initial parameters or performing scheduled calibrations or proof tests: The handling shall be safe, quick and easy. The password - protected Statox 502 software structure is so clear that most menu items are self - explanatory. The “Reset” button brings you time back into the measuring mode at any time. Even if you have to interrupt your work and forget to reset, the watchdog function returns the system into the measuring mode, if no button has been pushed for a while. Functional safety paired with utmost system flexibility The Statox 502 complies with the standards DIN EN 61508 and 61511 functional safety, level SIL 2. In context with the HRC or ARE sensor heads you can create a complete gas detection system for combustible gases complying with SIL 2 standard. In larger installations signals of gas detectors often run into SIL certified process control systems, in smaller plants there is a need for a control module complying with SIL requirements. As any combination sensor head / control module forms a complete gas detection system, this system closes the gap. It is expandable without limits, and there is no restriction to the mix of sensor heads connected. Connecting other front ends The versatility of the Statox 502 does not end with gas detection. You can connect any front end providing a 4 – 20 mA analog signal or a Wheatstone bridge signal. So you can create your own compact control system for a variety of sensors with just one type control device. Accessories Useful accessories such as calibration adapters, intrinsically safe repeaters, Power supplies etc. complete the system. 205 VAC, 8 A min. make or break power >/= 12 V, 10 mA, contakte silver / nickel

Fixed gas detection system for oxygen, toxic and combustible gases This DIN – rail mounted modern control module saves space, money and installation time. One safe controller for all gases: Any combination of a sensor head plus control module is a complete gas detection system. This makes the Statox 501 so safe and reliable. The Statox 501 also gives you the opportunity to alter or expand existing systems with minimum cost and labor. Programs for all gases and measuring ranges are permanently stored in the memory of the controller. The user-friendly software program allows authorized personnel to select different configurations by a simple push of a button. Easy to install and easy to use The controll modules as well as the power supply and the common alarm module clip on to a DIN rail. The remote sensor heads and any alarm or recording devices connect to terminals on the front of the module. Each Statox 501 control module has three relays for alarm 1 and 2 and system failure (115 / 230 V AC / 2 A). An analog output for recorder or process control systems is also included. Measured values are displayed on a 4 digit LED-display. It is easy to program or calibrate the Statox 501! Just follow the menu! If intrinsically safe transmitters are to be installed in division 1 areas, they can be connected via intrinsically safe repeaters. 24 V power supply as well as the signals for the common alarm module are transmitted via bus from one module to the next. All terminals are easily accessible from the front. Field proven sensors for reliable gas detection Compur manufactures electrochemical sensors for the detection of oxygen deficiency and toxic gases. These sensors generate an electrical current proportional to the actual gas concentration. The remote sensor heads are designed as intrinsically safe certified 4 - 20 mA transmitters and have an integrated concentration display. Combustible gases can be detected with a variety of catalytic beads (pellistors) or infrared technology. The sensor heads are certified "Ex d" or "Ex de" and can be connected directly to the control module, even if they are to be used in classified areas. The control module can supply and operate different designs of catalytic sensors. With so many possibilities, the system can easily be tailored to suit your individual application needs. Easy maintenance saves time and money Maintenance of the 4 – 20 mA transmitters is very easy. A one-man calibration or replacement of the sensors can be done without further precautions, even in classified areas. Accessories A range of wall-mount cabinets for a maximum of 5, 8 or 32 controllers as well as a 19”-carrier, ensure an easy professional installation. -20 - +60 °C

For people with reduced mobility or service personnel, SmartLane 912 security turnstile proposes a wider passage with enhanced access control in both directions of passage (entrance/exit). Main Benefits : Wide walkway adapted to the mobility-impaired that is ideal for wheelchairs, large carts or wide objects UL 325 certified to ensure additional user safety High-performance detection system to eliminate unauthorized use and false alarms (FAR and FRR) Streamlined and elegant oval design that integrates well into both prestigious lobbies yet robust enough for your harsh industrial environments Aesthetics Precise backlit pictograms for safe pedestrian flow Streamlined and elegant oval design that integrates into prestigious lobbies yet robust and durable for your harsh industrial environments Quality assembly and detailed manufacturing Safety Detection sensors near the moving obstacles assure user safety Mechanical opening in case of emergency or power outage Safe and...

For people with reduced mobility or service personnel, SmartLane 910 security turnstile proposes a wider passage with dissuasive control in both directions of passage. Main Benefits : Wide walkway adapted to the mobility-impaired that is ideal for wheelchairs, large carts or wide objects UL 325 certified to ensure additional user safety High-performance detection system to eliminate unauthorized use and false alarms (FAR and FRR) Streamlined and elegant oval design that integrates well into both prestigious lobbies yet robust enough for your harsh industrial environments Aesthetics Precise backlit pictograms for safe pedestrian flow Streamlined and elegant oval design that integrates into prestigious lobbies yet robust and durable for your harsh industrial environments Quality assembly and detailed manufacturing Safety Detection sensors near the moving obstacles assure user safety Mechanical opening in case of emergency or power outage Safe and retractable tempered glass...

The device can perform water pressure measurements in the water supply network and temperature measurement in 2 places - on the sensor itself and in the device housing. The sensor is produced in two versions - IP54 (possible replacement of the battery on the user's side on the object) or IP68 (battery replacement only in the manufacturer's service) The sensor measures at intervals of 1 min to detect sudden pressure increases. It is possible to set an alarm threshold, the exceeding of which triggers the immediate sending of data frames. In normal operation mode, reading reporting takes place with an interval of 15 minutes every 6 hours from the last 24 hours.

With the new ALO manual welding laser, you can either work manually or with an axis of rotation for circular welding. The working chamber is easily accessible via leather curtains, but the welding itself still takes place in the shielded laser safety area. The spacious working chamber can be loaded quickly through various openings, without opening doors: a large opening at the front ensures easy access to the welding chamber. The slots on the side enable the operator to position longer components in the machining area and to weld them in a laser-safe manner. Another passage on the bottom of the working chamber allows loading from below. The laser safe leather curtain offers certified laser protection so that the laser device can be placed in any work environment. The armrest is extremely comfortable - ensuring relaxed work. A lot of attention was also paid to good ergonomics. A high-quality extraction system with filter is integrated as standard.

Suitable also for welding precision mechanical parts and medical technology components as well as for the manufacture of sensors and electrical components The ALS 100 is an ergonomic workplace The spacious work chamber offers a very brightly lit work area and is loaded via two side doors. The average power of 100 W enables a fast pulse sequence (up to 25 Hz) and thus fast work even at high energy settings. The homogeneous fusion of the materials results in welding results of the highest quality. The laser is used in the manufacture and repair of jewelry, in precision engineering or when welding sensors

Registration of inclination in the gravitational field by means of MEMS sensors (Micro-Electro-Mechanical-System) with subsequent digitisation and linearisation via controllers. MEMS sensors are integrated circuits manufactured using silicon bulk micromechanical technology. Double capacities are formed with the aid of moveable micromechanical structures. If these structures are deflected in the case of acceleration, e.g. gravitational acceleration (g), this results in capacity changes, which are registered and further processed using measuring technology. The output voltage follows the function U ~ g * sin α. In this case, the angle α is the sensor's inclination angle measured against the g-vector. These sensors measure precisely, have a long service life and are very robust. The measuring axes operate independently of each other.

The KINAX N702-INOX Series of Tilt Sensor, manufactured by Camille Bauer Metrawatt AG, is specifically designed for robust heavy-duty utilization. This device is configured as a high robust and absolute inclination transmitter. It is mainly suitable for hostile areas applications. Moreover, this tool is made from sealed stainless-steel enclosure design and has an intense mechanical strength to generate more efficiently, and offers high installation versatility.

AMETEK Engineered Medical manufactures advanced technology sensor components for different types of continuous glucose monitoring devices for its customers.

* Closed Loop Siemens CNC Servo Control System * Multi kW high speed & efficient Fiber and Disk laser * High Accuracy Cutting * Cut to line feature without shearing * Custom Size Cutting Bed * Rolling Cutting Table * Class I Enclosure Sheet Edge Detection Sensor IEC60825 & FDA & CE approval Coil Fed Laser Cutting Line Equipments * Loading Car capacity up to 30 tons * Coil Outer Diameter up to 2200 mm * Remote Control * Adjustable Drum Rotary Speed * Operation Controlled by Laser Sensor We have manufactured and sold 200+ laser cutting systems worldwide We have produced laser cutting systems which are generated by Fiber ,CO2 and Disk Lasers We have installed systems for global brands We provide project-based automation solutions

Our No Touch Steri-Prox range are the cleanest switches on the market! Well, we think so! They have an activation range of up to 70mm but if touched, the full sensor has antimicrobial technology built in which means it kills at least 99.9% of bacteria! The sensors have been manufactured using SteriTouch®, an antimicrobial protection with built-in silver ion technology. They offer protection against a range of bacteria including the Flu Virus, E. coli, MRSA, Salmonella and Legionella, as well as black mould growth, biofilm and fungi. Unlike surface disinfectants which temporarily eliminate bacteria from surfaces, the built-in protection will never wash off or wear away, protecting it for its lifetime! The antimicrobial acrylic is non scratch, anti-reflective and non-porous which makes our products easy to clean and maintain, controlling the growth of bacteria and fungi without affecting the colour or transparency.

OPTIMA wrap is a machine designed and built to produce wrap chenille yarn. The OPTIMA wrap is the only chenille machine that direct take up in cone the chenille yarn and check it during the manufacturing process. Quality control of the yarn is made by optical sensors (CMC – link CMC ) mounted on the machine. The advantages of this machine are countless and chenille here below there list the most importants: - Total elimination of the winding department, is no longer necessary to wind chenille yarn produced by the winding machine!!! - Control of yarn quality by optical sensors (CMC) during the manufacturing process of the chenille. - Production speed about double compared to a traditional chenille machine. - Reduced manpower almost 50%. - Greater resistance of the yarn produced, which results to be particularly suitable for weaving.