Results for
NORELEM FRANCE
France
Reinforced threaded inserts allow threaded holes which have been damaged, torn out or jammed to be used again or to be repaired. This makes it possible to recover scrap and rejects of expensive products. Reinforced threaded inserts are suitable for use in various materials, including light metals and casting. Inserts with internal threads larger than M6 are supplied with four locking pins instead of two. Permissible deviations: The medium tolerance class applies to the threads listed, i.e. 6H for nut threads and 6g for bolt threads. Other dimensions ±0.25 mm. With reinforced threaded inserts we also offer a version with a stronger cross-section for use in applications with greater stress. Technical information see operating instructions for threaded inserts.
Request for a quoteNORELEM FRANCE
France
Self-tapping threaded inserts for making high-strength, wear-free, vibration resistant screw connections in materials with low shear strength such as aluminium and aluminium alloys, brass, bronze, cast iron, duro and thermoplastics. The threaded inserts are tapered at the bottom and have a cutting slot. By screwing in they cut their own threads inside a receiver hole. This guarantees a completely secure and firm anchoring in the host material. Internal thread D1 acc. to ISO 6H. The threaded inserts with cutting slot spring slightly inwards in the slot region in some materials. This results in a screw locking effect. If this is not desired, we recommend the threaded inserts with a cutting bore.
Request for a quoteSOOCHOW ADVANCE INDUSTRIES CO., LTD.
China
threaded insert manufactured by CNC turning and milling material: stainless steel male thread: 7/16-20 UNF-2A female thread: 1/4-20 UNC-2B groove milled. width 0.060 +/- 0.015 inch, depth 0.062 +/- 0.015 inch size: diameter 0.525 +/- 0.015 inch, height 0.54 +/- 0.015 inch packing: individually packed in plastic tray, carton Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteNORELEM FRANCE
France
Tempered and black oxidised. Ball hardened. Note: Can be used with 02170 02180 02182 02190 02320 02330-020 02350-010 Drawing reference: 1) spherical 2) centring disc 3) prism 4) locating pin 5) revolving ball
Request for a quoteNORELEM FRANCE
France
Material Ballbearing steel 100Cr6. Seal, rubber NBR. Version Sealed on both sides with a spherical outer ring. Can be relubricated. Note The internal construction of the insert bearings corresponds to that of standard Series 6200 and 6300 radial ball bearing. However, they have wider inner rings for easier fastening on shafts. The inner rings are manufactured with a plus tolerance. This results in transition or press fits when using shafts with htolerances. The shaft is secured by 2 grub screws positioned 120° apart on the inner ring. The insert bearings are ready to install and are permanently lubricated with a suitable ball bearing grease. In normal applications, relubrication is not necessary.
Request for a quoteNORELEM FRANCE
France
Grippers and inserts are ideal for use in clamping arms, gripping systems, clamping fixtures, clamping jaws and self-aligning pads. The use of grippers allows the transfer of very high torque values and above average grip, even with hard materials and surface irregularities. Form O: The abrasive diamond surface is bonded firmly to the base. It is ideally suited to supporting smooth or slippery applications with a minimum of clamping pressure. This allows the diamond particles to get a firm grip on a very small area with minimum damage to the surface. The diamond surface offers excellent wear resistance. Form P: The polyurethane surface is vulcanised firmly to the ball. It is abrasion-resistant and does not discolour. It offers optimum protection against damage to delicate surfaces. The pearl-like surface gives a firm grip and allows air to escape so as to prevent any suction effect between the contact surface and the self-aligning pads.
Request for a quoteNORELEM FRANCE
France
Tempered and black oxidised. Note: The pressed in plastic inserts offer optimal damage protection for sensitive workpiece faces.
Request for a quoteNORELEM FRANCE
France
The required torque is set by a set screw and a graduated scale. The set value can be secured using the lateral clamping screw. When the set torque is reached the grip audibly and palpably releases. The loosening torque is higher than the tightening torque so that the torque handle can be released without any problems. The internal thread version has a hole in the set screw so that the torque handle can also be used on threaded rods. Set torque accuracy ± 5%. On request: Other thread lengths.
Request for a quoteNORELEM FRANCE
France
The pressed in plastic inserts offer optimal damage protection for sensitive workpiece faces.
Request for a quoteNORELEM FRANCE
France
Body tempered, black oxidised. Ball hardened, bright. Inserts: Form C, F hardened, black oxidised. Form M with carbide serrations, black oxidised. Form K white. Form E hardened, bright. Form O diamond impregnated surface comparable to 100 grade abrasive grit. Form P polyurethane surface, hardness 60 Shore. Note: Self-aligning pads are used to support and clamp unmachined and machined workpieces. In addition, they serve as stops, supports and thrust pads in fixtures and toolmaking. The ball can be removed from the housing by applying light pressure to the socket head screw. Ball secured against rotation. Advantages: Highly cost-effective as inserts can be exchanged. The built-in O-ring holds the ball in place and keeps dirt and foreign particles out, ensuring uniform movement. Drawing reference: Form C: flattened steel insert, smooth Form E: flattened stainless steel insert, smooth Form F: gripper face Form K: flattened POM insert, smooth
Request for a quoteVALDAMARK LIMITED
United Kingdom
Cortec VpCI® 130 AntiStatic Custom ESD Foam Inserts Safeguard sensitive electronics with Cortec VpCI® 130 AntiStatic Custom ESD Foam Inserts.Engineered by Cortec, these inserts offer unparalleled protection against static electricity and physical damage.The advanced antistatic formulation effectively dissipates static charges, preventing harmful ESD events. The closed-cell foam cushions and protects components from impacts, while Cortec's VpCI® technology provides long-lasting corrosion protection.Custom-cut for precise fit, these inserts are ideal for PCBs, semiconductors, and more.Eco-friendly and reusable, they offer exceptional value and peace of mind.
Request for a quoteVALDAMARK LIMITED
United Kingdom
Product Comparison: Custom ESD Foam Inserts VpCI-133 vs.Cortec VpCI-133 ESD Foam. This comparison focuses on two ESD foam products: Valdamark Direct's "Custom ESD Foam Inserts VpCI-133 Self Adhesive 1 x 1" and the standard "Cortec VpCI-133 ESD Foam" from the same supplier.Both products share a core of Cortec's VpCI-133 ESD foam, offering electrostatic discharge (ESD) protection and corrosion inhibition via Vapor phase Corrosion Inhibitor (VpCI) technology. Key similarities include ESD protection, corrosion inhibition, and self-adhesive backings.However, they differ in customisation, packaging, and pricing.The custom inserts are precisely 1x1 inch, individually packaged, and likely more expensive due to their tailored nature.In contrast, the standard foam comes in larger sheets, offering flexibility in sizing but potentially higher initial cost.
Request for a quoteSOOCHOW ADVANCE INDUSTRIES CO., LTD.
China
Knuckle Knob Insert material: stainless steel 316 coarse straight knurl diameter before knurl: 7 mm, outer diameter pitch 5.5 tooth depth 0.15 +/-0.05 mm length 25 mm inner thread at one end M5x0.8 Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteRHIMEX.COM
Netherlands
Profiles for Industrial Applications. In the large group of industrial applications (refrigeration and air-conditioning technology, machines, production lines, switchgear housings, wind power, tracked crane systems, containers, etc.) we produce individual sealing systems tailored to our customers’ needs. Special designs made on short notice--even in small series--made of diverse plastic or elastomer qualities, or combinations of both materials or assemblies lets us be your technical problem solver. Our huge stock of standard profiles makes us a reliable partner for a wide-range of applications. Sealing Profiles Through application-specific production of rings, frames or fixed lengths, the product is precisely tailored to any purpose. The function of the profile is optimally executed even in the radiuses or corners. We manufacture ready-made profiles in various processes, from cold bonding, film bonding, injection molding to sealing.
Request for a quoteSYSKOMP GMBH - EMICO
Germany
Discontinued item – available as long as stocks last. Material: PA Colour: natural
Request for a quoteSYSKOMP GMBH - EMICO
Germany
for square holes For the mounting of parts with metric screws on components with holes. The nut tapping is done by the screw. Permits blind assembly and prevents nut rotation. Material: PA 6.6 / PA 6 Colour: natural / black
Request for a quoteSYSKOMP GMBH - EMICO
Germany
Centrical screw guidance in the inner body, very durable. Material: PA 6 Colour: grey
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SIA ATTA-1
Latvia
With rotary control, two-way switch and soft-catch. 2-wire connection (neutral conductor not required) Optimised for dimming of retrofit LED lamps (LEDi). For dimmable Retrofit-LEDs (LEDi). For dimmable Retrofit-LEDs (LEDi) with conventional or electronic transformers. For incandescent lamps, 230 V tungsten halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable energy-saving halogen lamps. Mix operaton of LEDi with conventional loads possible. Via mode switch adjustable between leading edge control and trailing edge control. Low-noise level by MOSFET transistors. With electronic short-circuit protection. With electronic overload protection. With adjustable minimum brightness. Without cover plate. Rated voltage: 230 V~, + 10% / - 10% Rated frequency: 50 Hz/60 Hz Nominal power: 2 - 100 W/VA (retrofit LED loads). Nominal power: 10 - 250 W/VA (non-LED loads).
Request for a quoteA2Z FASTENERS
United Kingdom
M22 - 22mm Nyloc Nuts Nylon Insert Nuts Type T Stainless Steel A2 - DIN 985. A wide range of Stainless Steel fasteners including Nyloc Nuts Type T Stainless Steel DIN 985 at cost-effective price available from A2Z Fasteners.
Request for a quoteA2Z FASTENERS
United Kingdom
M14 - 14mm Nyloc Nuts Nylon Insert Nuts Type P Bright Zinc Plated Grade 8 - DIN 982. A wide range of Bright Zinc Plated fasteners including Nyloc Nuts Type P Bright Zinc Plated Grade 8 DIN 982 at cost-effective price available from A2Z Fasteners.
Request for a quoteA2Z FASTENERS
United Kingdom
M18 - 18mm Nyloc Nuts Nylon Insert Nuts Type P Bright Zinc Plated Grade 8 - DIN 982. A wide range of Bright Zinc Plated fasteners including Nyloc Nuts Type P Bright Zinc Plated Grade 8 DIN 982 at cost-effective price available from A2Z Fasteners.
Request for a quoteA2Z FASTENERS
United Kingdom
M20 - 20mm Nyloc Nuts Nylon Insert Nuts Type P Bright Zinc Plated Grade 8 - DIN 982. A wide range of Bright Zinc Plated fasteners including Nyloc Nuts Type P Bright Zinc Plated Grade 8 DIN 982 at cost-effective price available from A2Z Fasteners.
Request for a quoteA2Z FASTENERS
United Kingdom
M24 - 24mm Nyloc Nuts Nylon Insert Nuts Type P Bright Zinc Plated Grade 8 - DIN 982. A wide range of Bright Zinc Plated fasteners including Nyloc Nuts Type P Bright Zinc Plated Grade 8 DIN 982 at cost-effective price available from A2Z Fasteners.
Request for a quoteA2Z FASTENERS
United Kingdom
M12 - 12mm Nyloc Nuts Nylon Insert Nuts Type T Stainless Steel A2 - DIN 985. A wide range of Stainless Steel fasteners including Nyloc Nuts Type T Stainless Steel DIN 985 at cost-effective price available from A2Z Fasteners.
Request for a quoteA2Z FASTENERS
United Kingdom
M12 - 12mm Nyloc Nuts Nylon Insert Nuts Type P Bright Zinc Plated Grade 8 - DIN 982. A wide range of Bright Zinc Plated fasteners including Nyloc Nuts Type P Bright Zinc Plated Grade 8 DIN 982 at cost-effective price available from A2Z Fasteners.
Request for a quoteA2Z FASTENERS
United Kingdom
M24 - 24mm Nyloc Nuts Nylon Insert Nut Type T Bright Zinc Plated Grade 8 - DIN 985. A wide range of Bright Zinc Plated fasteners including Nyloc Nuts Type T Bright Zinc Plated Grade 8 DIN 985 at cost-effective price available from A2Z Fasteners.
Request for a quoteA2Z FASTENERS
United Kingdom
M12 - 12mm Nyloc Nuts Nylon Insert Nut Type P Galvanised Grade 8 DIN 982. A wide range of Galvanised fasteners including Nyloc Nuts Type P Galvanised Grade 8 DIN 982 at cost-effective price available from A2Z Fasteners.
Request for a quoteA2Z FASTENERS
United Kingdom
M30 - 30mm Nyloc Nuts Nylon Insert Nuts Type P Bright Zinc Plated Grade 8 - DIN 982. A wide range of Bright Zinc Plated fasteners including Nyloc Nuts Type P Bright Zinc Plated Grade 8 DIN 982 at cost-effective price available from A2Z Fasteners.
Request for a quoteA2Z FASTENERS
United Kingdom
M27 - 27mm Nyloc Nuts Nylon Insert Nuts Type P Bright Zinc Plated Grade 8 - DIN 982. A wide range of Bright Zinc Plated fasteners including Nyloc Nuts Type P Bright Zinc Plated Grade 8 DIN 982 at cost-effective price available from A2Z Fasteners.
Request for a quoteResults for
Inserts - Import exportNumber of results
94 ProductsCountries
Company type