Remote alarms - Import export

The Lascar EL-WiFi-TPX+ is the solution for those who want to keep an eye on the temperature in an environment from a distance. With a measuring range of -40 to +125°C (-40 to +257°F), you can always be sure that you are aware of any temperature exceedances. And thanks to the alarm warning light and sound signals, you'll never miss an important moment again! The EL-WiFi-TPX+ periodically uploads the collected data via a standard WiFi network to the EasyLog Cloud, so you can easily view it from any internet-enabled device. In addition, the EasyLog Cloud allows you to adjust settings remotely, receive email notifications of alarm conditions and assign multiple users.

Meet the Lascar EL-WiFi-TC Temperature Logger WiFi, a powerful tool for remote temperature monitoring using an interchangeable J, K or T type thermocouple. With the supplied K Type probe, this logger measures temperatures from 0 to 200°C (32 to 392°F). The data is periodically uploaded via a standard WiFi network to the EasyLog Cloud or a single host PC. With the EasyLog Cloud you always have access to the temperature logger and all data collected, from any device connected to the internet. Adjust settings remotely, receive email notifications of alarm conditions, link sensors from multiple locations to one account, and assign multiple users.

Are you looking for a reliable solution for monitoring temperatures in a room? With the Lascar EL-WIFI-DTC Temperature Logger WiFi you can monitor an environment from any location, with a standard WiFi network, using two interchangeable J, K or T type thermocouples. The data logger is supplied with two K Type probes, with a measuring range of 0 to 200°C (32 to 392°F). With the ability to periodically upload data to the EasyLog Cloud or a single host PC, this data logger offers an unparalleled level of flexibility and accessibility. EasyLog Cloud provides access to any data logger and data collected from any device connected to the internet. You can change data logger settings remotely, receive email notifications of alarm conditions, link sensors from multiple locations in one account, and assign multiple user privileges.

Three-phase protection for TNC-S System High discharge capacity ,quick response,pluggable Multifunctional conneciton for conductors and busbars Green window will change to red when fault and also provide remote alarm control at the same time

New- / First- /Common Signal Annunciator RP 5994, RP 5995 • Fast localisation of failures and their causes • Reduction of standstill times in production • Adjustable operating modes: New- / First signal annunciator according to DIN 19 235, common alarm annunciator manual reset / auto reset settable • Expandable from 8 to 88 fault signals • Open or closed circuit operation settable • Adjustable on delay for input signals 0 to 10 sec • Reset buttons for audible alarm and common alarm on front side • Connection for external reset of audible alarm, common alarm and single alarm according to setting • Galvanic separation to bus RS485 (optional) • Accessories: buzzer RK 8832, display unit EH 5994, EH 5995 text display unit EH 5996, GMS-module RP 5810 • Width: 70 mm Base module RP 5994: - 8 fault signal inputs with indicator LED on the unit - One relay output each for audible alarm and common alarm - Reset buttons for audible alarm, common alarm, and single alarm - Connection of remote...

If mobile phone reception is poor and there is a landline connection available, the automatic telephone dialler is a reliable alternative to fault message transmission by text message. Any fault messages are forwarded to different pre-programmed phone numbers. Product features For forwarding fault messages via the landline. Integrated microphone and control loudspeaker Voice messages to any number of recipients Digital message to one or more alarm receiving systems Remote query, remote control depending on device type Messages to pager or as text message depending on device type

Multifunctional smart watch with casual design, Bluetooth® connection and rechargeable via USB cable -included-. Elegant metal case, with TPU strap and integrated 1.54-inch IPS touch screen, making it the perfect gadget for all types of sports, leisure and everyday activities. With ´´BT calling´´ function that allows you to make and receive calls without having to insert your SIM card into the device. It also has other functions such as heart rate monitor, blood pressure and blood oxygen, sleep monitor, light, remote camera, alarm, anti-loss, pedometer, stopwatch and music player. Splash resistant, with APP available for iOS and Android. Presented in an attractive design box. Instruction manual available in Spanish and English. Bluetooth Connection. 1,54" IPS Screen. Battery 160 mAh TPU Strap

Remote LED indicatorDue to its compact dimensions (11x45 mm), the VPOS can be used as remote indicator for Intrusion Alarm System setting/unsetting confirmation Also, VPOS can be used as remote indicator for fire alarm detectors, e.g., for detectors installed behind the ceiling, false floor etc. Can be connected to all fire detectors with the appropriate contacts

Comprehensive monitoring and alarm functions enable you to react quickly as needed to ensure the reliable availability of heating energy and process heat. — Convenient remote monitoring of your boiler system and access to all important operating parameters — Simply integrate the remote technology for connection via Internet or a company network — Fast and cost-efficient online support from Bosch experts on request — Safety first: Certified, multilevel security concept for your remote access — Automatic alarm notification by text message or e-mail as an option so you can react quickly when needed

Fixed gas detection system for oxygen, toxic and combustible gases This DIN – rail mounted modern control module saves space, money and installation time. One safe controller for all gases: Any combination of a sensor head plus control module is a complete gas detection system. This makes the Statox 501 so safe and reliable. The Statox 501 also gives you the opportunity to alter or expand existing systems with minimum cost and labor. Programs for all gases and measuring ranges are permanently stored in the memory of the controller. The user-friendly software program allows authorized personnel to select different configurations by a simple push of a button. Easy to install and easy to use The controll modules as well as the power supply and the common alarm module clip on to a DIN rail. The remote sensor heads and any alarm or recording devices connect to terminals on the front of the module. Each Statox 501 control module has three relays for alarm 1 and 2 and system failure (115 / 230 V AC / 2 A). An analog output for recorder or process control systems is also included. Measured values are displayed on a 4 digit LED-display. It is easy to program or calibrate the Statox 501! Just follow the menu! If intrinsically safe transmitters are to be installed in division 1 areas, they can be connected via intrinsically safe repeaters. 24 V power supply as well as the signals for the common alarm module are transmitted via bus from one module to the next. All terminals are easily accessible from the front. Field proven sensors for reliable gas detection Compur manufactures electrochemical sensors for the detection of oxygen deficiency and toxic gases. These sensors generate an electrical current proportional to the actual gas concentration. The remote sensor heads are designed as intrinsically safe certified 4 - 20 mA transmitters and have an integrated concentration display. Combustible gases can be detected with a variety of catalytic beads (pellistors) or infrared technology. The sensor heads are certified "Ex d" or "Ex de" and can be connected directly to the control module, even if they are to be used in classified areas. The control module can supply and operate different designs of catalytic sensors. With so many possibilities, the system can easily be tailored to suit your individual application needs. Easy maintenance saves time and money Maintenance of the 4 – 20 mA transmitters is very easy. A one-man calibration or replacement of the sensors can be done without further precautions, even in classified areas. Accessories A range of wall-mount cabinets for a maximum of 5, 8 or 32 controllers as well as a 19”-carrier, ensure an easy professional installation. -20 - +60 °C

for vacuum lifting devices type CLAD-LIFT More functionality for the CLAD-LIFT with attaching parts and several oad handling attachments. Twin wheels, Lifting hook, Support wheels, Adapter 150° and 165°, Radio remote control, optical or acoustical alarm, Platform for forks, Solid rubber heavy load wheels, suction plates, extensions of traverses or other application. Twin wheels Give the CLAD-LIFT more stability and better handling on soft surfaces and reduces the point load pressure of the wheels to the floor surface. Lifting hook For transporting suspended loads on the CLAD-LIFT. The goods to be transported can be simply suspended with a loading belt or a chain. Support wheels To stabilize the CLAD-LIFT when assembling windows and glass doors. Improves safety when pivoting and rotating the load. Lifting fork Turns the CLAD-LIFT into a pallet truck for transporting pallets and other loadable goods. Ideal for loading and unloading vehicles without crane and forklift. Adapter...

Our vandal resistant BS 8300-2 compatible emergency assistance alarm system provides cost-effective solutions built from standard and bespoke units. We offer stand-alone toilet alarms, multiple toilet alarms with remote monitoring and combined systems with disabled refuge EVCS, fire telephone, building alarms, etc. Interfaces for BMS and transmission over IP are also available. Ideal for shops, offices, hotels, factories and similar locations.

Closely matched with the performance and specifications of our accomplished 19” rack-mounting waveguide dehydrators, the 12445 series Waveguide Dehydrator is intended to offer our customers a range of space-saving wall-mounting alternatives. Now available with 3 levels of performance, the 12445 range suits many applications. Protruding only 16cm or 23cm from a wall, and mounting via integral keyhole slots, these units dispense with any need for additional shelving or brackets. In addition to the exceptional performance now associated with Drallim Waveguide Dehydrators, in this case between 5 and 35 cubic feet per hour output, the 12445s are loaded with features, including the following: Integral air reservoir Adjustable output pressure regulator Output flow meter Humidity detection equipment Excessive run-time alarm Remote alarm monitoring terminal Digital runtime display High and low output pressure alarms

The 12437 Waveguide Dehydrator, designed for cable pressurisation applications, has proved successful in numerous aerial and waveguide applications, and a low-pressure version has evolved. This unit is the same as its higher-pressure counterpart, but for an output regulator, and gauge which are more accurate within the 0.5 to 3 p.s.i. pressure band. This dehydrator uses an efficient 1/3 HP compressor to fill its large integral receiver to a pressure of up to 65 p.s.i. In addition, to the larger receiver, the unit benefits from built in compressor and receiver gauges. These gauges can help the operator to assess the condition of a unit, and help with fault finding in the event of a failure. Another useful feature of this unit is the humidity detector test facility, which assists in fault analysis alongside the standard remote alarms. In common with all our current units, the 12437 Waveguide Dehydrator is equipped with a thermal/magnetic overload circuit breaker with neon indicator.

The patented Power Lube Sensor system can be installed on all lubrication points of the machine. It can be adapted to all kinds of oil and grease pumps installed upstream of the system (supplied via a central lubrication system or automatic lubricators or even gas system lubricator or manual pump, etc.). Description of the Power Lube Sensor ® Precise control and mastered alerts: The Power Lube Sensor Technology cleverly developed for data collection of up to 100 Power Lube Sensor units. Design and functional description: The Power Lube Sensor allows both to control the quantity / volume of lubricant as it passes through the electromechanical system and the remote transmission of alarms related to poor lubrication faults. It also controls the various alarms (battery level fault alarm, lubricant volume fault alarm, operating alarm, etc.) while adapting to all lubrication systems and industrial machine lubrication points system.

Colloide designs and builds a variety of pumping systems for our clients, pumping anything from pure water through to heavy slurries. As a process engineering contractor, we will develop the package which is the best fit for the purpose. It will have one or more pumps at the core, but with ancillary equipment designed into the system. Variances include: A variety of pump types such as submersible/dry well end suction/progressive cavity/ vertical multistage etc. Pipework in stainless steel, ductile iron, galvanized mild steel, epoxy coated steel, UPVC, ABS, MDPE… Control panels in a range of standards with optional data logging, alarms, remote monitoring, etc. Level controls such as ultrasonic level contollers, float switches, pressure transducers.

Zygi-scale is a precision weighing scale with an alarm system. You remotely monitor beehives in terms of weight and weather conditions and also secure them with an intelligent alarm system. Events are notified through SMS, email or stored to a secured web page 3G-GPRS