Results for
ROTAS SWORN AND ORDINARY TRANSLATION OFFICE
Poland
Our range of rental equipment also includes soundproofed simultaneous interpreting booths . Due to their low weight and simple design, the cabins are very easy to install; good ventilation makes them comfortable for interpreters. Signals between the transmitter and receivers are transmitted via infrared, which prevents the sound from leaking out and is difficult to intercept by third parties. One simultaneous interpretation booth is intended for a maximum of two shifting interpreters of the same language - if you want to translate into more than one language, you will need to rent more booths.
Request for a quoteMICRO-EPSILON
Germany
The transmission sensor ACS3 is applied for measurements of self-luminous objects and transparent objects as well. Measuring the colour of self-luminous objects requires only the receiver unit, whereas a transmitter and a receiver unit are necessary when detecting transparent objects. The transmitter and the receiver unit can easily be fixed by means of a mounting set.
Request for a quoteMICRO-EPSILON
Germany
The optoCONTROL 2520 is a compact laser micrometer with integrated controller. A high resolution, model variant with measuring ranges of 46 mm and 95 mm as well as variable mounting distances allow a wide range of applications in quality monitoring and production control. The measurement object can be placed at any position within the light curtain and the distance from transmitter to receiver can be freely selected.
Request for a quoteADS-TEC INDUSTRIAL IT GMBH
Germany
HDBaseT is a wired solution for signal transmission, such as image and USB signals, in production environments. Interference-free transmission of signals is possible up to a distance of 100 metres. Perfect for users who are not satisfied with the 15 m distance achievable with DP or HDMI. The HDBaseT Box is available as a stand-alone transmitter module, as well as with or without an additional receiver module. The HDBaseT Box can be attached by simply snapping it onto the DIN rail.
Request for a quoteRM2M
France
Telecrane remote controls are available in three distinct ranges, all made of reinforced polymers for optimal robustness. F21-E3M: Specifically designed for applications such as hoists or sanitation trucks, they offer between 2 and 6 functions ( with 1 step buttons). F24: Equipped with 12 to 52 functions, these remote controls are versatile. They are ideal to control aerial work platforms, special vehicles, overhead cranes, winches, cranes, hoists, conveyors, hydraulic and pneumatic equipment, PLC interfaces, and many other industrial machines. F25: Designed for a variety of equipment, they offer from 6 to 11 functions, especially for needs such as lifting or steering ( available with 1 or 2 steps buttons). Possibility of increased range 500 meters between transmitter and receiver. Band Frequency 433MHz.
Request for a quoteFORTEZA
Russia
Microwave bistatic sensors FORTEZA-FONAR are mounted into park lamps and combine protection and lighting functions. The sensors are intended for the protection of administrative buildings, park territories, office buildings, villas and other objects with high requirements for the territory appearance or secrecy of the alarm system. The sensors function as the alarm devices and decorative lamp. The lights can be switched on or off automatically or manually. The housing of one sensor can contain one or two receivers (or transmitters). Like this we decrease the number of devices on the territory and mounting works. Several frequency letters of the sensors allow for the sensors to operate near each other. It is possible to produce upon request the sensors FORTEZA-FONAR with a radio channel for wireless transmission of an alarm signal to a centralized monitoring console.
Request for a quoteFORTEZA
Russia
FORTEZA-M300 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M300 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.
Request for a quoteFORTEZA
Russia
FORTEZA-50 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-50 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.
Request for a quoteFORTEZA
Russia
FORTEZA-300 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-300 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.
Request for a quoteFORTEZA
Russia
FORTEZA-200 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-200 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.
Request for a quoteFORTEZA
Russia
FORTEZA-M200 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M200 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.
Request for a quoteFORTEZA
Russia
FORTEZA-50 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-50 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.
Request for a quoteFORTEZA
Russia
FORTEZA-M100 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M100 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.
Request for a quoteFORTEZA
Russia
FORTEZA-M50 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M50 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power station, private houses, etc.) Operation on 24,15 GHz allows to: - use sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.
Request for a quoteFORTEZA
Russia
FORTEZA-100 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-100 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.
Request for a quoteNANOSYSTEC GMBH
Germany
The NanoWeld stations provide the ideal platform for the development and production of opto-electronic components, like singleand multi-channel transmitters and receivers. The station works with exchangeable trays and grippers accepting all device housing types and lenses, optical fibers or receptacles to be aligned and attached. Cycle times for the rapid mass production of TOSA type assemblies reach less than 25 seconds while it takes several minutes for complex devices.All components and subassemblies to build the NanoWeld station are of highest quality and performance. Even customized systems start from a common platform which minimizes development time and cost. By using device-specific trays and grippers, the time to change between different batch processes or device types is reduced to the minimum. Loading and unloading of these trays is performed on a separate loading station outside of the automated NanoWeld. The automated alignment starts from a known reference position.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
LONGSUN CORPORATION LTD
United Kingdom
Model No.:LSPU1640OAH12-1; Product Attributes : *Open structure and fission; *Compact and light weight; *High sensitivity and sound pressure; *Less power consumption; *High reliability. Applications: People Detection; Automated Store Displays; Booths & Kiosks; Lithium Battery Applications; Solar Powered Applications; Remote Monitoring Stations; Non-Contact Detection; Shipping systems; Mobile Robotics; Chemically Hazardous Locations; Tank Level Measurement; Freight Management Systems; Liquid Level Control; Tide/Water Level Monitoring; Dimensioning & Positioning; Long Range Object Detection; Proximity Detection; Security Systems. Technical parameter: Using Method: Transmitter/receiver; Frequency: 40±1KHz; S.P.L: min. 110dB (10v/30cm); Frequency: 39±1KHz; Sensitivity: min.-65dB/V/µ bar; Capacitance: 2500pF±25% at 1KHz; Directivity: 50 degree; Detectable Range: 0.7~18m; Housing Material: Aluminum.
Request for a quotePPS GMBH
Germany
RFID (Radio Frequency Identifikation) is a technology that uses electromagnetic waves to communicate between transmitter and receiver. The transmitter is a transponder containing a programmed unique code (UID), the receiver is a compatible reading unit. In the cards technology the transponders are flat coils with antenna integrated inside the PVC card - invisible from outside. The surface can be fully printed - in contrary to the classic contactchips where you need to consider the position of the chip while creating the layout of the card. RFID cards are very handy, according to the type, frequency or performance of the antenna the cards are readable contacless also from distance. A typical application for RFID technology are ski tickets. We are printing your layout on RFID cards in Offsetprint and on demand the cards are personalised with the unique Chipcode (UID). This UID is saved in a logfile that can be imported into the customers system, so that every card in use is already...
DR. JOHANNES HEIDENHAIN GMBH
Germany
Wireless signal transmission The signals are transmitted from wireless touch probes to the SE transmitter/receiver unit via • radio or infrared for the TS 460, • infrared for the TS 444, TS 642, TS 740. This makes these touch probes ideal for use on machines with automatic tool changers. The following transmitter/receiver units are available: • SE 660 for radio and infrared transmission; shared SE for TS 460 and TT 460 • SE 540 only for infrared transmission, for integration in the spindle head • SE 642 only for infrared transmission, shared SE for TS and TT The SE 660 communicates with the TS 460 and TT 460. The SE 540 and SE 642 can be used in any combination with the TS 4xx, TS 642 and TS 740 touch probes.
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The AZ10/100LVEL16VS is a differential receiver with variable output swing. The LVEL16VS has functionality and output transition times similar to the EL16, with an input that controls the amplitude of the Q/Q¯ outputs. FEATURES • 250ps Propagation Delay • High Bandwidth Output Transitions • Operating Range of 3.0V to 5.5V • Internal Input Pulldown Resistors • Functionally Equivalent to ON Semiconductor MC10EL16, MC100EL16 & MC100LVEL16 • Variable Output Swing
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
DUCATI HC812-300 electromechanical hinged door operator 12 V for light-weight 2-leaves gates up to 2.3 m leaf length. Effective working stroke 280 mm. Protection against accidents by cut-off in case of over-current. Scope of delivery: 2 drive units, 1 control with receiver, 2 manual transmitters and also a mounting bracket.
Request for a quoteSMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
Einhell mini remote control HS 434/6, 434 MHz 6-channels Coding: 16.7 million possibilities, for garage door operators BGT 63, BM 60, TA 160, TA-G 63, TA-G 83, TA-G 103, GTA 160, GTA 163, side hinged gate operator AFA 2601,EFA 1200, FA-G 2601, FAG 1601 Dimensions: 38 x 50 x 15 mm, battery: 23 A, 12 V Programming the transmitters: Hold the learning key located in the operator down for 4 seconds until the red control LED goes on. Then release the button and press the chosen control button on the manual transmitter. The red LED now off. The control code has now been stored. Note: You can store a max. 3 manual transmitters in the operator. If a fourth transmitter is stored, the code set for the first transmitter is lost. The control code is not lost in case of power failure. With malfunction pull the mains plug and repeat operation. If you want to use more than 3 transmitters, an additional receiver must be installed in the receiver /operator, than you may order transmitter...
Request for a quoteDR. JOHANNES HEIDENHAIN GMBH
Germany
The TT 160 and TT 460 tool touch probes aretouch trigger probes for the measurement and inspection of tools. The TT 160 features signal transmission by cable, while the TT 460 communicates wirelessly over a radio or infrared beam with the SE 660 transmitter/receiver unit. The disk-shaped probe contact of the TT is defl ected during physical probing of a tool. At that moment the TT generates a trigger signal that is transmitted to the control, where it is processed further. The trigger signal is generated through a wear-free optical switch that ensures high reliability. The probe contact is easy to exchange. The connection pin to the contact plate features a rated break point. This protects the touch probe from physical damage due to operator error.
Request for a quoteCOMITRONIC BTI
France
20 N integrated handle magnetic door holding High temperature and silicone cable Contactless coded electronic sensor Level of performance with AWAX controller: up to PL = e Safety category: up to 4 with an AWAX controller Time before dangerous failure: MTTFd = 100 years Max. activation distance: 3 mm, 1 mm hysteresis Holding Force: transmitter + receiver in contact = 20N Safety contacts/diagnostics: 2 x NO 0.8A/24V redundant and 1 x PNP 250mA Detection encoding: mono-code inviolable Reset: automatic Housing mount: 4 tamper-proof M4 screws (optional ref: BH4) Handle assembly: M8 screw (optional handle) Mounting position: 2 (double wall brackets) Material: INOX 316L mirror polished Electrical connection: 50cm Ultra-soft silicone cord with M12 connector. Water resistance: IP 69K Extreme temperature: -40°C to +125°C Marking: laser engraving with mechanical punching of the serial number for permanent traceability
Request for a quoteCOMITRONIC BTI
France
High temperature, magnetic door holding, integrated 20N Contactless coded electronic sensor Total safety management with an AWAX controller Level of performance with AWAX controller: up to PL = e Safety category: up to 4 with an AWAX controller Time before dangerous failure: MTTFd = 100 years Max. activation distance: 3 mm, 1 mm hysteresis Holding Force: transmitter + receiver in contact = 20N Safety contacts/diagnostics: 2 x NO 0.8A/24V redundant and 1 x PNP 250mA Detection encoding: mono-code inviolable Reset: automatic Attachment: 4 tamper-proof M4 screws (optional ref: BH4) Mounting position: 2 (double wall brackets) Material: INOX 316L mirror polished Electrical connection: 50cm Ultra-soft silicone cord with M12 connector. Water resistance: IP 69K Extreme temperature: -40°C to +125°C Marking: laser engraving with mechanical punching of the serial number for permanent traceability
Request for a quoteCOMITRONIC BTI
France
40N integrated stainless steel magnetic door holding Contactless coded electronic sensor Total safety management with an AWAX controller Level of performance with AWAX controller: up to PL = e Safety category: up to 4 with an AWAX controller Time before dangerous failure: MTTFd = 360 years Max. activation distance: 3 mm, 2 mm hysteresis Holding Force: transmitter + receiver in contact = 40N Safety contacts/diagnostics: 2 x NO 0.8A max / 48V redundant and 1 x PNP 250mA Detection encoding: mono-code inviolable Reset: automatic Attachment: 4 tamper-proof M4 screws (optional ref: BH4) Mounting position: 1 Material: INOX 316L mirror polished Electrical Connection: 3, 6, 12m cable or 50cm cord PUR M12 (ref. + MKT) Water resistance: IP 67/68 (EPINUS-4K-MKT) and IP 69K (EPINUS-4K/SES) Temperature: -25°C to +70°C. Marking: laser engraving with mechanical punching of the serial number for permanent traceability
Request for a quoteCOMITRONIC BTI
France
40N integrated stainless steel magnetic door holding Contactless encoded electronic sensor with relay Category 3 total safety management without an external controller Level of performance without an external controller: PL = d Level of performance with AWAX controller: up to PL = e Safety category without an external controller: 3 Safety Integrity Level: SIL 2 Cycle before dangerous failure: B10d = 2,000,000 at 2A Max. activation distance: 4 mm, 2 mm hysteresis Holding Force: transmitter + receiver in contact = 40N Safety contacts/diagnostics: 2 x NO 2A/48V redundant / 1 x PNP 250mA encoding detection: single inviolable code Reset: automatic Attachment: 4 tamper-proof M4 screws (optional ref: BH4) Mounting position: 1 Material: INOX 316L mirror polished Electrical connection: 3, 6, 12m cable Water resistance: IP 67/68 Temperature: -25°C to +60°C Marking: INOX316L laser engraving with mechanical punching of the serial number for permanent traceability Certification: TÜV Rheinland 01/205/5238/12 License Test Mark 968/EL 214.01/12
Request for a quoteONAIR MEDYA LTD
Turkey
General, The P1 Vertical Dipole antenna series is designed for FM Broadcast Band (87, 5 - 108 MHz). Each antenna is composed of one balun feed vertical dipole, two rigid feed lines, and a mounting bracket. Omni-Directional Broadband, Suitable for channel or broadband operations with multi-channel combiners. Easy installation Water, icing, moisture protection State of the art mechanical design Lightning resistance
Request for a quoteResults for
Receivers and transmitters - Import exportNumber of results
45 ProductsCountries
Category