Results for
MODULUS METAL
Turkey
EN 1561 / Gray (Flake Graphite): EN GJL 100, EN GJL 150, EN GJL 200, EN GJL 250, EN GJL 300, EN GJL 350 EN 1563 / Nodular (Spheroidal, Ductile): EN GJS 350 22, EN GJS 350 22 LT, EN GJS 400 15U<30mm, EN GJS 400 18, EN GJS 400 18 LT, EN GJS 400 18U, EN GJS 450 10,EN GJS 500 7, EN GJS 600 3, EN GJS 700 2 as cast & normalized, EN GJS 700 2 hardened & tempered, EN GJS 800 2 as cast & normalized, EN GJS 800 2 hardened & tempered, EN GJS 900 2 as cast & normalized, EN GJS 900 2 hardened & tempered EN 1562 Malleable : Blackheart, Pearlitic, Whiteheart ALLOY CAST IRONS Austenitic :Flake Graphite , Nodular Graphite High Silicon White Cast Iron :High Chromium, Low alloy, Nickel-Chromium CARBON STEELS Low Carbon Steels Medium and High Carbon Steels ALLOY STEELS High, Medium and Low Alloy Steels STAINLESS STEELS Ferritic, Martensitic, Austenitic, Duplex, Precipitation Hardened
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine tap Form B with spiral entry, for through holes Application: For high-tensile materials Material of product: HSSE Surface treatment: TIN For materials: High-tensile materials, Alloyed heat-treatable steel, Cast iron , Aluminium cast and wrought alloys, Copper and alloys, etc* Tensile strength up to: 1300 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Special geometry, base material and surface treatment for high-strength material. The TIN surface treatment (titanium-nitride gold-yellow) increases the surface hardness (approx. 2300 HV) and the sliding properties. It provides a better cutting performance and increased tool life time. Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Materials: High strength material up to max. 1300 N/mm² Alloyed heat-treatable steel, cast iron with nodular graphite, malleable cast iron Aluminium cast and wrought alloys Si<5% (long-chipping)
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: For high-tensile materials Material of product: HSSE Surface treatment: TIN For materials: High-tensile materials, Alloyed heat-treatable steel, Cast iron , Aluminium cast and wrought alloys, Copper and alloys, etc* Tensile strength up to: 1300 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Special geometry, base material and surface treatment for high-strength material. The TIN surface treatment (titanium-nitride gold-yellow) increases the surface hardness (approx. 2300 HV) and the sliding properties. It provides a better cutting performance and increased tool life time. Tap for machine use in blind holes. The fast spiral flutes provide good chip removal from the blind hole. Materials: High strength material up to max. 1300 N/mm² Alloyed heat-treatable steel, cast iron with nodular graphite, malleable cast iron Aluminium cast and wrought alloys Si<5% (long-chipping)
Request for a quoteKFB CLARFELD GERMANY GMBH
Germany
Our housings and their respective bearings form bearing units which have proven themselves in machines, plant and other equipment. Bearing housings are usually made of cast iron, on request we can deliver housings in cast steel and nodular graphite cast iron. As the bearings are usually lubricated with grease, and this first lubrication holds for quite a while, most housings don’t have re-lubrication holes. There are however, gates or markings present, so that lubrication holes can be fitted if necessary. When re-lubricating, it must be ensured that excess lubricant can escape. The bearing seating points in the housings are usually machined so that the bearings are movable, so they function as floating bearings. Fixed bearings are achieved by inserting fixing rings, if these are listed in the table. Fixing rings must be ordered separately. Housings without fixing rings are delivered as floating bearing models (L) or fixed bearing models (F).
Request for a quoteEXOTERM-IT D.O.O.
Slovenia
Purpose of use: Steel castings Nodular graphite cast irons Grey cast irons
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
EXOTERM-IT D.O.O.
Slovenia
EXO – COATING ZG 3V is an alcohol -based dressing. Its characteristic is a high refractoriness and a wide range of applications. Purpose of use: Aluminium and aluminum alloys, Steel castings, Nodular graphite cast irons, grey cast irons, other colored materials
Request for a quoteEXOTERM-IT D.O.O.
Slovenia
AQUADUR M-15 is a water-based ceramic dressing in pasty form. Its characteristic is a high refractoriness. Approximate composition: about 60 % refractory filling (Al and Mg silicates, Fe oxide) about 6 % organic binder about 34 % water Purpose of use: Aluminium and aluminum alloys, Steel castings ,Nodular graphite cast irons, Grey cast irons, Other colored materials
Request for a quoteXIAN HUAN-TAI TECHNOLOGY & DEVELOPMENT CO., LTD.
China
Graphite iron castings Gray iron casting Huan-Tai specialize in investment castings, sand castings, die castings, gravity castings in material of carbon steel, alloy steel, cast iron, ductile iron, aluminum, bronze and custom material. Typical products include custom casting parts, trailer parts, agricultural gearbox, gear, gear shaft, CNC machining parts, train parts, wear resistant parts, crusher parts like liner plates, bowl liner, jaw plate, mantle, heavy castings, coal mining machinery parts and aluminum castings & bronze castings etc. We strive to provide the high quality castings with tight tolerance and try to avoid defects delivered to our customers. Our inspection: 1.Metal testing and analysis, mechanical properties, microstructure, spectrometer and furnace chemical composition analysis. 2.Non-destruction inspection: MPE, LPE, UE and RE 3.Dimension inspection: well experienced inspector team 4.Quality control 5.3rd party inspection
Request for a quoteHENGONG PRECISION EQUIPMENT
China
Ductile iron EN-GJS-600-3
Request for a quoteKUTES METAL
Turkey
MELTING UNIT– 1 • Brand: Inductotherm • Type: Dual Truck – 2.250 KW • Capacity: 3 tons/each x 4 unit MELTING UNIT– 2 • Brand: Inductotherm • Type: Dual Truck – 3.500 KW • Capacity: 5 tons/each x 4 unit
Request for a quoteEXOTERM-IT D.O.O.
Slovenia
KARBOSIL is a product for addition of Si and C in the molten iron. It is used in the production of synthetic iron, which required lower values of sulfur and nitrogen.
Request for a quoteResults for
Nodular graphite cast iron - Import exportNumber of results
12 ProductsCountries
Company type