Pressure regulators - Import export

Pressol pneumatic Oil pump installation set for 200/220L drum model 19235600 To pump Engine, transmission, hydraulic oil. Ideal for direct connection to pipeline systems up to 70 m Can be easily combined with several hose reels Suitable for oil up to SAE 90 Installation set consisting of: Oil pump 3:1 model 19235 Compressed air hose 2 m DN10 with quick couplings Euro profile Oil drain hose 2 m DN13 with 1/2G bi.bu Ball valve 1/2 Filter Pressure Regulator with Oil Mister 20218950

10,000 PSI (700 BAR) INFINITY SERIES (ISP) ELECTRIC PUMP The SPX FLOW PE45 is an Infinite Stage Electric Pump which increases productivity on the job by providing continuous pressure for up to two times the speed of typical 2-stage pumps. Jobs get done faster and easier. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122°F (50°C) ambient Proven design = Proven reliability Enhanced Usability: Light Weight: 71 lb (32.2 kg) [without oil] Removable control pendant (15 ft / 5 m) Removable (4") 100 mm, calibration-capable gauge Universal Motor for reduced voltage applications (up to -20% nominal voltage) 4 tool manifold available powers up to 4 tools from a single pump (not for lifting applications) High flow to get work done faster Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Fixed 1,500 psi (103 bar) retract relief valve pressure

1,500 BAR (21,750 PSI) SUBSEA & LARGE TENSIONER APPLICATIONS High flow tension pump. Corrosion resistant frame works well for applications near salt water. High flow ideal for subsea applications where compressed air is the required power source. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 50°C (122°F) ambient Proven design = Proven reliability Enhanced Usability: Calibrated 150mm (6") Pressure Gauge Dual oil outlets with quick-connect, no spill couplings Pneumatic Filter/Regulator/Lubricator included Stainless Steel carry frame Designed with Safety in Mind: Easily adjusted pressure regulator valve Air pressure safety relief valve

TOPSIDE BOLT TENSIONER & HYDRAULIC NUT PUMP Standard flow tension pump. Corrosion resistant frame works well for applications near salt water. Standard flow ideal for land based (topside) tension applications where the required power source is compressed air. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122°F (50°C) ambient Proven design = Proven reliability Enhanced Usability: Calibrated 6" (150mm) Pressure Gauge Dual oil outlets with quick-connect, no spill couplings Pneumatic Filter/Regulator/Lubricator included Stainless Steel carry frame Designed with Safety in Mind: Easily adjusted pressure regulator valve Air pressure safety relief valve

21,750 PSI (1,500 BAR) HIGH PRESSURE ELECTRIC PUMP The SPXFlow PE8 is a very high pressure pump that incorporates proven design for reliable operation. It is based on proven pump design for reliability in rugged bolt tensioning applications. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122˚F (50˚C) ambient Proven design = Proven reliability Enhanced Usability: Light Weight and portable: 45.5 lb (20.6 kg) [without oil] Quick Release, removable control pendant (15 ft / 5 m) Removable 4" (100 mm), calibration-capable, gauge Universal Motor for reduced voltage applications (up to -20% nominal voltage) SPX Tensioners are designed to daisy-chain together so multiple tools can run off one pump Compact design fits into tight spaces Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve

10,000 PSI (700 BAR) CLASSIC SERIES AIR HYDRAULIC PUMP The RWP55-BS has been the market leading pump for over 30 years & is therefore tried & tested. A simple, light-weight design with a recent upgrade that has created a cost-effective workhorse. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122°F (50°C) ambient Proven design = Proven reliability Enhanced Usability: Powerful 3 hp motor starts under load Retract side internal relief valve protects tool Use with single or double acting tools. Not for lifting applications 4" calibration capable gauge Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Has a retract port pressure selector 10,000 psi (1,500) CAUTION: This system should not be used for lifting applications.

10,000 PSI (700 BAR) CLASSIC SERIES ELECTRIC HYDRAULIC PUMP The original electric pump! Features a simplified electrical control box and a proven, reliable design. Typically sold to customers that already have a fleet of similar pumps. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122°F (50°C) ambient Proven design = Proven reliability Enhanced Usability: Power Team, two-speed high performance, PE55 base pump Retract side internal relief valve protects tool 4-way 2-position solenoid valve standard Use with single or double acting tools, not for lifting applications Hand remote standard Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Fixed 1,500 psi (103 bar) pressure retract relief valve CAUTION: This pump should not be used for lifting applications.

10,000 PSI (700 BAR) CLASSIC SERIES ELECTRIC HYDRAULIC PUMP The PE55TWP-BS has been the market leading electric pump for over 30 years & is therefore tried & tested. A simple, light-weight design with a recent upgrade that has created a cost-effective workhorse. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122°F (50°C) ambient Proven design = Proven reliability Enhanced Usability: Two Speed High Performance pump Retract side internal relief valve protects tool Hand remote Four-tool manifold (-4 models only) allow use of up to four tools simultaneously 4" calibration capable gauge Use with single or double acting tools Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve 1,500 psi (103 bar) pressure retract relief valve CAUTION: This system should not be used for lifting applications.

10,000 PSI (700 BAR) COMPACT ELECTRIC TORQUE WRENCH PUMP The SPXFlow PE39 is compact and capable of being used in a vertical or horizontal orientation. Based on proven pump design for reliability in rugged torque wrench applications to support operation and maintenance requirements. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122˚F (50˚C) ambient Proven design = proven reliability Enhanced Usability: Light weight and portable: 39 lb (17.7 kg) Removable control pendant (15 ft / 5 m cord length) Removable 4" (100 mm) calibration-capable gauge Universal Motor for reduced voltage applications (up to -20% nominal voltage) Vertical or horizontal operation Easy install cooling fan as option Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Fixed 1,500 psi (103 bar) retract relief valve pressure

10,000 PSI (700 BAR) INFINITY SERIES (ISP) AIR PUMP The SPX FLOW PA60A is an Infinity Stage Air Pump which increases productivity on the job by providing continuous pressure for up to 2x the speed of typical 2-stage pumps. Jobs get done faster and easier. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 50°C (122°F) ambient Proven design = Proven reliability Enhanced Usability: Light weight and portable: 77 lb (34.9 kg) [without oil] PA60APF5FP Light weight and portable: 88 lb (40.1 kg) [without oil] PA60APF5FMPR Removable control pendant (25 ft / 7.6 m) Removable 4" (100 mm), calibration-capable gauge CE ATEX Ex II 2 GDc T4 4 port manifold available to power up to 4 tools from a single pump (not for lifting applications) Fewer parts for lower service cost Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Fixed 1,500 psi (103 bar) retract relief valve pressure

Using 615gr Cream Chargers at home is slowly becoming the order of the day and is no longer only for high standards defined by chefs. However, as the demand rises, the number of inexperienced people who don’t use it properly increases. If you wish to make optimal use of this device, you must adhere to the guidelines that 615gr Cream Chargers users are required to follow:The ideal way to use a Cream Charger of 615gr like Fastgas is with a pressure regulator. Think about this option if you expect to bake some cakes with a nice finished-topping all day long. You can connect your siphon to your N2O gas cylinder or Cream Charger using the regulator up to 20bar. The regulator minimizes gas waste and provides more control in the cream filling process. HOW TO CONNECT A PRESSURE REGULATOR- STEP BY STEP: Connect the pressure regulator to the cylinder’s valve. Install one end of the hose to the regulator. You usually acquire a hose together with the regulator.

Our user-friendly helium tank is perfect for filling balloons with helium for your parties. The FastGas helium tank consists of a total of 2.2 liters of compressed helium, which equals 30 9″ balloons. The helium tanks make use of high-quality European helium gas. The canister can be used in combination with a pressure regulator to assure using the right amounts of helium in your balloons so as to not waste any of the helium gas. Adheres to the European rules and regulations Disposable cylinders made from stainless steel Improved cylinders guaranteeing full capacity

The user-friendly carbon dioxide disposable cylinder is the perfect accessory for creating food or carbonated drinks. The carbon dioxide cylinder consists of either 600, 1250 or 2200 grams of carbon dioxide. The carbon dioxide cylinder makes use of high-quality European carbon dioxide, The cylinder can be used in combination with a pressure regulator to assure using the right amount of carbon dioxide. Adheres to the European rules and regulations Disposable cylinders made from stainless steel Improved cylinders guaranteeing full capacity

Surprise your visitors with the most delicious desserts! Find out the secrets of the professionals in the kitchen in this blog. Just how do you make that soft, whipped cream and meringue? The secret is in nitrous oxide. Nitrous oxide determines a lot for the flavor, texture, and longevity of the cream. By combining nitrous oxide with a whipped cream siphon, you can have delicious, creamy whipped cream made in just a few minutes. WE’VE LISTED THE STEPS BELOW FOR YOU: Remove the head from your whipped cream siphon, pour in the exact amount of cream that matches the size, along with sweetener or powdered sugar to taste, and reattach the head. Locate the N2O cartridge holder and unscrew it. Insert the hose from the nitrous oxide cream charger into the cartridge holder and unscrew the pressure regulator to release the nitrous oxide gas. Fill the whipped cream siphon. And tighten the cartridge holder again.