Results for
France
Saint Emilion Grand Cru Blend: Merlot - Cabernet Sauvignon - Cabernet Franc Ageing potential: Approximately 20 years Vinification : Harvested by hand, the grapes are destemmed and then sorted by densimetric bath. This is followed by a week's pre-fermentation cold maceration and 10 days' alcoholic fermentation, during which the grapes are pumped over and the cap punched down. The wine is run off and then pressed before ageing for 15 months: 60% in new barrels and 40% in temperature-controlled stainless steel vats. Oenologist: Thomas Duclos Translated with DeepL.com (free version)
Request for a quoteAustria
Thoroughly Disinfect and hygienically preserved gym equipment Curbing the spread of pathogens via human, surfaces and equipment cross-contamination Up to 10 days of maximum protection after use A ready to use formula anywhere and anytime A disinfectant capable of demonstrating a wide range of microbiological action A bactericidal and pesticidal efficacy A cleaning solution that is active against the host of rotaviruses (norovirus, human papillomavirus) and residual antimicrobial effect of up to ten days against bacteria. A disinfectant worthy of preventing the scariest viruses including coronavirus, HIB, HBV, HCV, Influenza, Herpes, Coronavirus, and Ebola virus. A disinfectant capable of killing a wide range of fungi including A, Niger, and Calbicans.
Request for a quoteGermany
ALDOVET OXY is a special surface disinfectant in powder form for the effective control of bacteria, viruses and yeasts. Based on active oxygen, ALDOVET OXY has an extremely broad spectrum of microbicidal efficacy including non- enveloped viruses and spores. Coincident guarantees for a low impact on humans and the environment due to the break- down of its active ingredient into non-toxic substances. ALDOVET OXY has a very rapid onset of action, even in low concentrations. Furthermore, the product contains dirt-dissolving substances that support the cleaning of surfaces. ALDOVET OXY is used for the disinfection of surfaces and medical devices, particularly in case of an elevated risk of infections with enveloped and non-enveloped viruses as well as bacterial spores. It is ideally suitable for the wiping disinfection of surfaces in the veterinary practice and in animal shelters. Furthermore, ALDOVET OXY is very well suited for the disinfection of non-medical surfaces like floors.
Request for a quoteGermany
Properties: ALDOVET AS is a formaldehyde-free, liquid disinfectant concentrate based on formic acid, with a strong cleaning effect and a combined bactericidal, virucidal and yeasticidal effect. ALDOVET AS can also be used efficiently and without any problems at low temperatures. Application: Only apply on acid-resistant surfaces. Before disinfection, all surfaces must be cleaned thoroughly with suitable cleaning agents for animal houses (e.g. ALDOVET TENS). After the surfaces are cleaned and dried the proper use-solution of ALDOVET AS is applied with the usual application equipment. Surfaces with animal contact must properly be rinsed with water after disinfection.
Request for a quoteGermany
Properties: ALDOVET KOK is a special surface disinfectant to control the permanent and developing forms of endoparasites, nematode eggs (ascarids), oocysts, and Coocidia. At the same time, ALDOVET KOK has a strong bactericidal, virucidal and yeasticidal effect. It is recommended for use in animal houses, for livestock equipment and in animal transport vehicles. Application: Only apply on acid-resistant surfaces. Before disinfection, all surfaces must be cleaned thoroughly with suitable cleaning agents for animal houses (e.g. ALDOVET TENS). After the surfaces are cleaned and dried the proper use-solution of ALDOVET KOK is applied with the usual application equipment. Surfaces with animal contact must properly be rinsed with water after disinfection.
Request for a quoteGermany
Properties: SYSTEM-CLEANER is a cleaning concentrate which has been specially developed to eliminate organic and inorganic dirt like mucus, residual medication and incrustations in drinking water systems for poultry, pigs and bovines. Application: SYSTEM-CLEANER is particularly suitable for the cleaning of pipe systems, containers, tanks and drinking systems for the animals. Rinse thoroughly with water after use. overall cleaning :2-5 % for 6-12 hours
Request for a quoteFrance
Floors: Limestone Gold medal by Gilbert et Gaillard Vinification: Destemmed harvest, long maceration in stainless steel vats, then matured in French oak barrels. Brilliant garnet-red colour Intense, rich nose of toast, vanilla and liquorice with hints of liquorice and ripe fruit such as prunes. On the palate, the tannins are silky and well mellow.
Request for a quoteFrance
Grape varieties: Syrah - Cinsault Vinification: Direct pressing, static settling and fermentation in 14" / 16" stainless steel vats for 15 to 20 days. Bright, pale pink colour, The nose offers aromas of fresh fruit, as well as pretty floral floral notes. Lively and fresh on the palate. Gold medal from Gilbert et Gaillard IGP Côtes Catalanes
Request for a quoteFrance
Grape variety: Macabeu - Muscat Côtes Catalanes Gold medal by Gilbert et Gaillard Soil: Clay-limestone Vinification: Direct pressing, static settling and fermentation in 14" / 16" stainless steel vats for 15 to 20 days, then matured on fine lees until bottling. Tasting notes Brilliant pale yellow colour, The nose offers aromas of fresh fruit, citrus and exotic fruits, as well as pretty floral notes. Lively and fresh on the palate, the typical Muscat character dominates the finish.
Request for a quoteNetherlands
The LogTag ST100T-15 external sensor is a strong and safe external sensor specifically designed for use with food. This external sensor is suitable for measuring the core temperature of a product. Place the sensor in the food and measure the temperature accurately.
Request for a quoteTurkey
Stainless steel operations need a well-experienced team and new technologies to process. We have been operating precious metals for more than 20 years.
Request for a quoteTurkey
It is the quality with the best malleability feature among the austenitics. Its malleability capability is around 78% and it is named as the automat of stainless steel. Although the sulfur (S) addition improves its malleability, it also reduces corrosion resistance (lower than 304) and weakens its formability, it is especially not suitable for straight bending. Despite sulfur, its toughness degree is the same as 304.
Request for a quoteTurkey
It is the quality with the best malleability feature among the austenitics. Its malleability capability is around 78% and it is named as the automat of stainless steel. Although the sulfur (S) addition improves its malleability, it also reduces corrosion resistance (lower than 304) and weakens its formability, it is especially not suitable for straight bending. Despite sulfur, its toughness degree is the same as 304.
Request for a quoteChina
Standard: ASTM, AISI, DIN, EN, GB, JIS, SUS Length: as your request Width: 1000-1280mm Place of Origin: China Type: CoilCircle,Sheet Application: Construction., Bending, Shaping, Drawing Certification: ISO Processing Service: Cutting Technical Treatment: Cold Rolled Surface: BA, 2B, 2D, HL, #4, SB Edge: Mill-Edge or Slit-Edge Tolerance: ±0.02mm Supply Ability: 10000 Metric Ton/Metric Tons per Month 410 stainless steel Packaging Details: Standard export packing Lead time: 15-30days Payment term: T/T,L/C etc. Port of shippment: Xiamen,China
Request for a quoteTurkey
Stainless steel is a very common material to use in fabrication projects, thanks to its versatility and durability, among others. Stainless steel possesses high good corrosion resistance which makes it the primary option for industries such as pharmaceuticals, food, petrochemicals and machinery.The versatility of stainless steel requires different fabricating techniques. Stainless steel is a sensitive material which requires delicate weld preparation practices such as thorough surface preparation prior to commencement of welding. Shoddy surface cleaning may compromise the material features such as corrosion resistance. Stainless steel has definite advantages over other metals and, it’s one of the most expensive metal. This high cost puts additional pressure on fabricators to be more careful in fabrication processes. Stainless steel should be fabricated in a specialized clean workshop to prevent contamination. Also it required specialist steel contractors
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
China
Ming Xiao Manufacturing Co., Ltd engaged in Machine Parts manufacuring more than 20years, we have old lathe turning machine, automatic turning machine, and normal & high precision CNC turning machine,CNC Machining Center. We optimize the turning processes to make the machining cost to be lowest, accurate tolerance dimensions we use Numerical control machine, and low toleracne requested dimensions we use old lathe machine to produce, and small turned parts we use automatic lathe machine to produce. Stainless Steel:SS303,SS304,SS316,SS430 Highest Accuracy:±5μm Surface Finish:Ra0.4 / Rz 3.2 / N5 We provide precision CNC turning & Milling Services for producing Machine Parts for all industries,as long as you can provide detailed drawings and requirements, we can get back to you within two working days. Designs can in many kinds of formats, such as pictures, 3D model, CAD,etc. Price terms: FOB Ningbo, CIF destination port.
Request for a quoteItaly
With reference to the Specification: EN ISO 15983 dome head EN ISO 15984 countersunk head 522 525 Materials: Body: Austenitic stainless steel (A2) - Aisi304Cu - X3CrNiCu18-9-4 (EN 1.4567). Nail: Austenitic stainless steel (A2) - Aisi304 - X5CrNi18-10 (EN 1.4301).
Request for a quoteResults for
Stainless steel vats - Import exportNumber of results
194 ProductsCountries
Company type
Category